PRODUCT DATA
26500
Professional Field Marking Coating
CONTRACTOR鈥橲 CHOICE 鈥? INT./ EXT. 鈥? LATEX 鈥? FLAT 鈥? 26500 LINE
Vehicle Type
Product Description Waterborne 鈥? Latex
Professional Field Marking Paint is a quality waterborne field marking
Finish
paint designed for use in the collegiate and professional sports industry.
Flat
It is reducible (able to be thinned), and is ideal where an environmentally
Use
safe, quick-drying field marking paint is needed.
Interior / Exterior
Performance
Percent Solids By Weight
鈥? 64.7% 卤 2%
High hiding formulation
鈥? VOC free
Percent Solids By Volume
鈥? Nontoxic; will not harm grass or other landscaping
43.0% 卤 2%
鈥? Fast drying
鈥? Excellent color retention Suggested Coverage
650 SFPG @ 1 mil
鈥? Easy to apply
鈥? Good adhesion
Dry Film Thickness
鈥? Variable opacity Depending on desired opacity,
more or less material may be used
to achieve desired results.
May be applied to properly prepared鈥?
鈥? Grass Viscosity
112 KU 卤 5
鈥? Dirt
鈥? Clay
Flash Point
鈥? Concrete Non-flammable 鈥? >200掳 F.
鈥? Asphalt
VOC
Limitations Contains 0.0 lbs./gal. (0.0 gms./ltr.)
Complies with all Federal, State
and Local VOC standards.
Not recommended for areas constantly in contact with water. Do not use
in corrosive or chemical environments, or areas subject to intense heat.
Application Equipment
Airless or conventional spray
Drying Time
At 75掳F. / 50% RH
1/4 hour to touch
1 hour to recoat
Colors
White, off whites, pastels, light,
medium and deep colors
Products Included in This Line
26500 - White
26504 - Accent Base
26569 - Black
COLOR WHEEL PAINT MANUFACTURING COMPANY, INC.
Product Index 鈥? Category 9
2814 Silver Star Road 鈥? Orlando, Florida 32808
407-293-6810 鈥? 800-749-6810 鈥? Fax 407-293-0945
Miscellaneous Products
www.colorwheelpaint.com
09900
2001.1 / PDS / 1
PROFESSIONAL FIELD MARKING PAINT 鈥? CONTRACTOR鈥橲 CHOICE 鈥? LATEX 鈥? INT. / EXT. 鈥? FLAT
26500 LINE
Surface Preparation General Application Safety
The performance of this product is critically Mix thoroughly to a uniform consistency before WARNING! HARMFUL IF INHALED.
dependent upon the soundness of the substrate each use. Apply by brush, roller or airless SEE LABEL OR MSDS FOR LIST OF
to which it is applied. It has been determined sprayer. Work material vigorously into pores. HAZARDOUS INGREDIENTS. KEEP OUT
that as high as 80% of all paint and coating Maintain a wet edge. If roller application is OF REACH OF CHILDREN! May cause eye,
failures may be attributed to improper surface employed on porous surfaces, final passes skin, nose and throat irritation. To avoid
preparation. It is essential that the proper steps should be completed in one direction to ensure breathing vapors or spray mist, open windows
be taken before applying this product. a uniform appearance and texture. Apply at and doors or use other means to insure fresh
such a rate as to avoid runs and sags. If airless air entry during application and drying. If
General:
Surface must be completely dry and in sound spray application is employed on porous you experience eye watering, headaches or
condition. Surface should be clean and free surfaces, immediate 鈥渂ack rolling鈥? and 鈥渂ack dizziness, increase fresh air or wear
from dirt, grease, mill oils, rust, mill scale, brushing鈥? with wet roller/brush is recommended respiratory protection (NIOSH/MSHA TC 23C
chalky paint, efflorescence, organic growth, to help reduce pinholing and work material or equivalent) or leave area. Close container
mildew, and foreign matter to insure good into pores. after each use. Avoid contact with eyes and
adhesion of primers and/or finish coats. Peeling, skin.
Thinning:
First Aid
cracking, and chipping paint should be removed Under normal conditions thinning is not
by sandblasting, power tool cleaning, hand recommended. If you experience difficulty in breathing,
tool cleaning, pressure washing, scraping, or Clean-Up: leave the area to obtain fresh air. If continued
wire brushing. All glossy surfaces should be Clean all tools and equipment with warm, difficulty is experienced, get medical
sanded or de-glossed. Feather sand rough edges soapy water immediately after use. Flush spray assistance immediately. In case of eye
of previously painted surfaces and spot prime equipment thoroughly. contact, flush immediately with large
bare areas. Any deteriorated or failed sealant Application Equipment amounts of fresh water for at least 15 minutes
and/or patching compound should be removed and get medical attention; for skin, wash
Brush: Use a quality nylon or polyester brush.
and replaced. All unpainted substrates should thoroughly with soap and water. If
Roller: Use lambswool or synthetic cover:
be properly prepared according to swallowed, DO NOT INDUCE VOMITING.
3/8" to 1 1/4" nap, depending on surface texture.
respective manufacturer鈥檚 and/or supplier鈥檚 Get medical attention immediately.
Airless Spray: Use a tip size of between 0.013".
recommendations. Thoroughly review and
Storage and Handling
and 0.017". Tip size should reflect equipment
follow Color Wheel 鈥淪urface Preparation
type and pressure, applicator technique and Keep from freezing or exposure to intense
Guidelines鈥? and/or Color Wheel written
surface conditions. Adjust pressure for constant heat. Do not transfer contents to unlabeled
specification before applying.
and proper atomization. container.
Curing Technical Services
Drying time and curing will affect the Color Wheel Paints and Coatings offers and
performance of the product. Do not apply encourages the use of our free technical
when air, surface or product temperatures are service. We also advise you to contact us
below 50藲 F. or above 100藲 F. Surface regularly for updates to this and other
temperature must be at least 5藲 F. above dew technical data. For technical assistance, to
point. Plan ahead and avoid applying when arrange a consultation with a Sales
damp or threatening weather is expected. Representative, or for current technical data,
Product must cure at least 8 hours before being consult your yellow pages for the Color
subjected to moisture. During extremely warm Wheel location nearest you, or call toll free
weather, maintaining a wet edge may become (800) 749-6810.
difficult. Avoid application during the heat of
the day. During cool weather, be aware of
possible surfactant leaching. Do not apply late
in the day where dew or condensation may
form before product begins to cure. Allow this
product to cure a minimum of 30 days before
cleaning.
All technical advice, recommendations, and services are rendered by Color Wheel gratis. They are based on technical data which Color Wheel believes to be reliable, and are intended for use by persons having skill and knowhow at their own discretion and risk.
Color Wheel Paint Manufacturing Company, Inc. assumes no responsibility for results obtained or damages incurred from their use by purchaser/user in whole or in part. All information is subject to change without notice.
NOTE: Where applicable, and for consistency, technical data and test results contained in this document are based on the pure white base of the particular product line.
LIMITATION OF LIABILITY: COLOR WHEEL MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Liability, if any, is limited to replacement of the product or refund of the purchase price. LABOR OR COST OF LABOR AND OTHER CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED.
09900 2001.1 / PDS / 2
|