Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: emsdiasum_com---50440-10.asp
                                 EMS CATALOG NO:     50440-10
EMS PRODUCT: Dow Z-6040 Primer
DATE: 03/16/99
PAGE NUMBER: One of 6


MATERIAL SAFETY DATA SHEET

The information contained herein is based on data considered
accurate. However, no warranty is expressed or implied
regarding the accuracy of these data or the results to be
obtained from the use thereof.

Electron Microscopy Sciences assumes no responsibility for
personal injury or property damage to vendees, users or
third parties caused by the material. Such vendees or users
assume all risks associated with the use of the material.


ELECTRON MICROSCOPY SCIENCES
321 MORRIS ROAD
P.O. BOX 251
FORT WASHINGTON, PA 19034 24 HOUR EMERGENCY PHONE NUMBER
(215) 646-1566 CHEMTREC: (800) 424-9300
_________________________________________________________________

FOR PRODUCT AND SALES INFORMATION
_________________________________________________________________

CONTACT ELECTRON MICROSCOPY SCIENCES OFFICE ABOVE.

_________________________________________________________________

CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
_________________________________________________________________

PRODUCT NAME: Dow CorningR Z-6040 Silane
SYNONYM: Z-6040 Primer
GENERIC DESCRIPTION: Alkoxysilane
PHYSICAL FORM: Liquid
COLOR: Colorless to pale yellow.
ODOR: Aromatic Odor
NFPA PROFILE: Health 1, Flammability 1, Reactivity 0

Note: NFPA = National Fire Protection Association
_________________________________________________________________

OSHA HAZARDOUS COMPONENTS
_________________________________________________________________

CAS NUMBER WT% COMPONENT EXPOSURE LIMITS
000067561 < 2 Methyl Alcohol OSHA PEL (final rule) and
ACGIH TLV-skin: TWA 200
ppm; STEL 250 ppm.

002530838 99 Glycidoxypropyl Dow Corning guide: TWA 5
trimethoxysilane ppm, STEL 10 ppm. Also
see methyl alcohol
comments.

Comments: Methyl alcohol forms on contact with water or humid
air. Provide adequate ventilation to control exposures
1
within guidelines of OSHA PEL: TWA 200 ppm and ACGIH
TLV-skin: TWA 200 ppm, STEL 250 ppm.
_________________________________________________________________

EFFECTS OF OVEREXPOSURE
_________________________________________________________________

ACUTE EFFECTS:
EYE:
Direct contact irritates slightly with redness and swelling.
SKIN:
A single short exposure (less than 24 hours) may irritate.
Repeated prolonged contact (24 to 48 hours) may irritate
moderately.
INHALATION:
Product generates methyl alcohol which may cause blindness
and damage to nervous system.
ORAL:
Product generates methyl alcohol which may cause blindness
and possibly death if swallowed.

REPEATED EXPOSURE EFFECTS:
SKIN: None known.
INHALATION:
Product generates methyl alcohol which may cause blindness
and damage to nervous system.
ORAL:
Product generates methyl alcohol which may cause blindness
and possibly death if swallowed.

SPECIAL HAZARDS:
This material contains the following components with the
special hazards listed below.
CARCINOGENS: None known.
TERATOGENS: None known.
MUTAGENS: None known.
REPRODUCTIVE TOXINS: None known.
SENSITIZERS: None known.
COMMENTS:
When heated to temperatures above 150oC in the presence of
air, product can form formaldehyde vapors. Formaldehyde is
a potential cancer hazard, a known skin and respiratory
sensitizer; and an irritant to the eyes, nose, throat, skin,
and digestive system. Safe handling conditions may be
maintained by keeping vapor concentrations within the OSHA
Permissible Exposure Limit for formaldehyde.
The above listed potential effects of overexposure are based on
actual data, results of studies performed upon similar
compositions component data and/or expert review of the product.
_________________________________________________________________

FIRST AID MEASURES
_________________________________________________________________

EYE: Immediately flush with water for 15 minutes.
SKIN:
Remove from skin and wash thoroughly with soap and water or
waterless cleanser. Get medical attention if irritation or
other ill effects develop or persist.
INHALATION:
Remove to fresh air. Get medical attention if ill effects
persist.
2
ORAL: Get medical attention.
COMMENTS: Treat same as methyl alcohol poisoning.
_________________________________________________________________

FIRE FIGHTING MEASURES
_________________________________________________________________

FLASH POINT (CLOSED CUP): >213.98oF / 101.10oC
AUTOIGNITION TEMPERATURE: Not determined.
FLAMMABILITY LIMITS IN AIR: Not determined.
EXTINGUISHING MEDIA: Water spray. Carbon dioxide (CO2). Dry
chemical. Foam. Water can be used to cool fire exposed
container.
FIRE FIGHTING PROCEDURES: Self-contained breathing apparatus and
protective clothing should be worn in fighting large fires
involving chemicals.
UNUSUAL FIRE HAZARDS: None
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal breakdown of this
product during fire or very high heat conditions may evolve
the following hazardous decomposition products: Silicon
dioxide. Carbon oxides and traces of incompletely burned
carbon compounds. Formaldehyde.
_________________________________________________________________

ACCIDENTAL RELEASE MEASURES
_________________________________________________________________

CONTAINMENT/CLEAN-UP:
Sections labelled DISPOSAL INFORMATION and REGULATORY
INFORMATION of this MSDS provide information regarding
certain federal and state requirements. Clean up remaining
materials from spill with suitable absorbent. Clean area as
appropriate since some silicone materials, even in small
quantities, may present a slip hazard. Final cleaning may
require use of steam, solvents or detergents. For large
spills, provide diking or other appropriate containment to
keep material from spreading. If diked material can be
pumped, store recovered material in appropriate container.
Observe all personal protection equipment recommendations
described in sections labelled FIRE FIGHTING MEASURES and
EXPOSURE CONTROLS/PERSONAL PROTECTION. Local, state, and
federal laws and regulations may apply to releases and
disposal of this material, as well as those materials and
items employed in the cleanup of releases. You will need to
determine which federal, state and local laws and
regulations are applicable.

NOTE:See section labelled EXPOSURE CONTROLS/PERSONAL PROTECTION
for Personal Protective Equipment for spills.

PERSONAL PROTECTIVE EQUIPMENT FOR SPILLS:
EYE: Use full face respirator.
SKIN: Washing at mealtime and end of shift is adequate.
INHALATION: Use respiratory protection unless adequate local
exhaust ventilation is provided or air sampling data show
exposures are within recommended exposure guidelines.
Industrial Hygiene Personnel can assist in judging the
adequacy of existing engineering controls.
SUITABLE RESPIRATOR: Use self-contained breathing (SCBA) or
other supplied-air respirator.
PRECAUTIONARY MEASURES: Avoid eye contact: Avoid breathing
vapor. Keep container closed. Do not take internally.
3
COMMENTS: Product evolves methyl alcohol when exposed to water
or humid air. Provide ventilation during use to control
exposure within Section 2 guidelines or use air-supplied or
self-contained breathing apparatus.
NOTE: These precautions are for room temperature handling. Use
at elevated temperature, or aerosol/spray applications, may
require added precautions.
_________________________________________________________________

PHYSICAL AND CHEMICAL PROPERTIES
_________________________________________________________________

PHYSICAL FORM: Liquid.
COLOR: Colorless to pale yellow.
ODOR: Aromatic odor.
SPECIFIC GRAVITY @ 25oC: 1.07
VISCOSITY: 3.00 CST
FREEZING/MELTING POINT: Not applicable.
BOILING POINT: Not available.
VAPOR PRESSURE @ 25oC: Not determined.
VAPOR DENSITY: Not determined.
SOLUBILITY IN WATER: Not determined.
pH: Not applicable.
VOLATILE CONTENT: Not determined.

Note: The above information is not intended for use in preparing
product specifications.
_________________________________________________________________

STABILITY AND REACTIVITY
_________________________________________________________________

CHEMICAL STABILITY: Stable.
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: None.
MATERIALS TO AVOID: Oxidizing material can cause a reaction.
Water, moisture, or humid air can cause hazardous vapors to
form as described in Section labelled OSHA HAZARDOUS
COMPONENTS.
COMMENTS: None.
_________________________________________________________________

TOXICOLOGICAL INFORMATION
_________________________________________________________________

Optional Section - Complete information not yet available.
_________________________________________________________________

ECOLOGICAL INFORMATION
_________________________________________________________________

Optional Section - Complete information not yet available.
_________________________________________________________________

DISPOSAL INFORMATION
_________________________________________________________________

RCRA HAZARD CLASS (40CFR 261)

When a decision is made to discard this material, as received, is
it classified as a hazardous waste? N

4
FEDERAL HAZARDOUS WASTE CODE: NA

CHARACTERISTIC WASTE: Ignitable: NA
Corrosive: NA
Reactive: NA

TCLP: NA

State or local laws may impose additional regulatory requirements
regarding disposal.

NA = Not applicable.
_________________________________________________________________

TRANSPORT INFORMATION
_________________________________________________________________

DOT INFORMATION (49CFR 172.101)

PROPER SHIPPING NAME: Not applicable
HAZARD TECHNICAL NAME: Not applicable
HAZARD CLASS: Not applicable
UN/NA NUMBER: 0000
PACKING GROUP: Not applicable
0000 AND NA = Not applicable
_________________________________________________________________

REGULATORY INFORMATION
_________________________________________________________________

Contents of this MSDS comply with the OSHA Hazard Communication
Standard 29 CFR 1910.1200

TSCA STATUS: All chemical substances found in this product
comply with the Toxic Substances Control Act inventory
reporting requirements.

EPA SARA Title III Chemical Listings:

SECTION 302 Extremely Hazardous Substances:
000067561 < 2 Methyl alcohol 5000.00 LB RQ

SECTION 312 Hazard Class:
ACUTE: Y
CHRONIC: Y
FIRE: N
PRESSURE: N
REACTIVE: N

Y = Yes N = No

SECTION 313 Toxic Chemicals
000067561 < 2 Methyl Alcohol


SUPPLEMENTAL STATE COMPLIANCE INFORMATION

CAS # WT% COMPONENT

CALIFORNIA

WARNING: This product contains the following chemical(s) listed
5
by the State of California under the Safe Drinking Water and
Toxic Enforcement Act of 1986 (Proposition 65) as being
known to cause cancer.

None Known.

WARNING: This product contains the following chemical(s) listed
by the State of California under the Safe Drinking Water and
Toxic Enforcement Act of 1986 (Proposition 65) as being
known to cause birth defects or other reproductive harm.

None Known.

MASSACHUSETTS

000067561 < 2 Methyl Alcohol

NEW JERSEY

002530838 99 Glycidoxypropyl trimethoxysilane
000067561 < 2 Methyl Alcohol; #1222

PENNSYLVANIA

002530838 99 Glycidoxypropyl trimethoxysilane
000067561 < 2 Methyl Alcohol




6

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
emsdiasum_com---26303-1.asp 2610-10-8 7647-14-5 7732-18-5
emsdiasum_com---26357-02.asp 2610-10-8 7647-14-5 7732-18-5
emsdiasum_com---26472-03.asp 46-17-5 67-56-1 3244-88-0 5141-20-8 1936-15-8 51312-42-6 12026-57-2 64-19-7 3761-53-3
emsdiasum_com---26658-03.asp 6153-56-6
emsdiasum_com---26777-01.asp 7114-03-6 92-32-0 7732-18-5
emsdiasum_com---50360-01.asp 1344-28-1
emsdiasum_com---50370.asp N/A
emsdiasum_com---50376-01.asp N/A
emsdiasum_com---50376-05.asp 64741-44-2 111-76-2
emsdiasum_com---50400-s.asp 127-19-5
emsdiasum_com---50400-xx.asp N/A
emsdiasum_com---50402-xx.asp N/A
emsdiasum_com---50403-xx.asp N/A
emsdiasum_com---50410-30.asp 109-99-9 28064-14-4 78-93-3
emsdiasum_com---50419-20.asp N/A
emsdiasum_com---50425-xx.asp 9010-75-7
emsdiasum_com---50440-10.asp N/A
emsdiasum_com---60514-01.asp 34590-94-8 5131-66-8
emsdiasum_com---60538-01.asp 111-76-2 34590-94-8 78-96-6
emsdiasum_com---60703.asp 8012-95-1
emsdiasum_com---62589-10.asp 67-56-1 67-63-1 67-64-1 61-73-4 25322-68-3 50-00-0
emsdiasum_com---64110-01to64111-10.asp N/A
emsdiasum_com---72170.asp 67-63-0 142-82-5
emsdiasum_com---72570-09.asp 7085-85-0
emsdiasum_com---72592.asp N/A
emsdiasum_com---72619.asp 1717-00-6 65530-85-0 163440-89-9 131324-06-6 811-97-2
emsdiasum_com---74250.asp 007732-18-5 010117-38-1 007757-83-7 001330-43-4 001310-58-3 000111-46-6 000123-31-9 000055-55-0
emsdiasum_com---74270-01.asp 007732-18-5 007631-90-5 007757-83-7 000068-04-2
emsdiasum_com---74300.asp 007772-98-7 007784-25-0 000127-09-3 007681-57-4 001303-86-2 007732-18-5 007631-90-5
emsdiasum_com---74317.asp 79-01-6 124-38-9
emsdiasum_com---74318.asp 115-10-6 75-28-5 74-98-6 811-97-2
emsdiasum_com---74319.asp 109-66-0 64741-66-8 68476-85-7
emsdiasum_com---74340.asp 000064-19-7 007732-18-5 000115-40-2
emsdiasum_com---74961-01.asp 1310-58-3 123-31-9
emsdiasum_com---74962-01.asp N/A
emsdiasum_com---91006-au.asp 7440-57-5
emsdiasum_com---gold_conjugates.asp N/A
emsdiasum_com---msdspoly_l_lysinesolution.asp 025988-63-0 007732-18-5
emsdiasum_com---msds_phosphotungstic_acid.asp 12501-23-4
emsdiasum_com---qx102applicationmanualv2-1.asp N/A
epoxy_com---1005msds.asp 65997-15-1 14808-60-7
epoxy_com---100msds.asp 25068-38-6
epoxy_com---1200msds.asp 7440-66-6 25036-25-3 1330-20-7
epoxy_com---150msds.asp 000100-42-5
epoxy_com---1800whitemsds.asp 28182-81-2 463-67-7
epoxy_com---209msds.asp 25068-38-6 25154-52-6 106-89-8 68609-97-2
epoxy_com---214msds.asp 25085-99-8
epoxy_com---215lvoc_msds.asp 108-10-1 64742-94-5 1330-20-7 1308-38-9 25036-25-6
epoxy_com---250msds.asp 025085-99-8 14808-60-7 13463-67-7
epoxy_com---260msds.asp 28064-14-4 14228-73-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC