EMS CATALOG NO: 72592
PRODUCT NAME: Tissue Freeze Medium庐
DATE: 10/25/2000
PAGE NUMBER: ONE of 3
MATERIAL SAFETY DATA SHEET
The information contained herein is based on data considered
accurate. However, no warranty is expressed or implied
regarding the accuracy of these data or the results to be
obtained from the use thereof.
Electron Microscopy Sciences assumes no responsibility for
personal injury or property damage to vendees, users or
third parties caused by the material. Such vendees or users
assume all risks associated with the use of the material.
ELECTRON MICROSCOPY SCIENCES
321 MORRIS ROAD
P.O. BOX 251
FORT WASHINGTON, PA 19034 24 HOUR EMERGENCY PHONE NUMBER
(215) 646-1566 CHEMTREC: (800) 424-9300
EXPLOSION AND FIRE HAZARD DATA
______________________________________________________________________
This product is not a flammable solid.
EXTINGUISHING MEDIA: Water, carbon dioxide, dry chemical powder,
foam. Use medium necessary for surrounding
fire.
SPECIAL FIRE FIGHTING
PROCEDURES: Firefighters must wear self contained
breathing apparatus and fully protective
equipment.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Not Established.
______________________________________________________________________
HEALTH HAZARD
______________________________________________________________________
THRESHOLD LIMIT VALUE: Not Established.
EFFECTS OF
OVEREXPOSURE: This material is only harmful under unusual
conditions or overwhelming dosage. Do not ingest or
inhale.
FIRST AID
SKIN CONTACT: Wash affected area with soap and water.
EYE CONTACT: Flush eyes with water for at least 15 minuets. Seek
medical treatment if discomfort persists.
______________________________________________________________________
REACTIVITY DATA
______________________________________________________________________
STABILITY: Stable
CONDITIONS TO AVOID: Not Established
INCOMPATIBILITY: Not Established
HAZARDOUS DECOMPOSITION PRODUCTS: None
HAZARDOUS POLYMERIZATION: Will not occur
CONDITIONS TO AVOID: Not Established
______________________________________________________________________
SPILL OR LEAK PROCEDURES
______________________________________________________________________
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Mop up spilled material; wash and ventilate the site.
WASTE DISPOSAL METHOD:
Flush waste material down the drain, or incinerate.
2
Disposal must comply with Federal, State and local regulations.