MATERIAL SAFETY DATA SHEET
PRODUCT NAME: EPOXYSYSTEMS鈥? PRODUCT #100 PART A HMIS CODES: H F R P
PRODUCT CODE: Product #100 A 110B
SECTION 1: MANUFACTURER IDENTIFICATION
MANUFACTURER'S NAME: EPOXY SYSTEMS, INC.
ADDRESS: 9370 SW 208th Circle
Dunnellon, FL 34431
EMERGENCY NUMBER: 1-800-633-8253 DATE PRINTED: 07/25/05
INFORMATION NUMBER: 1-352-489-1666 PREPARER: N. LAMBERT
SECTION 2: HAZARDOUS INGREDIENTS
ACGIH
OSHA PEL TLV WT % CARCINOGEN
HAZARDOUS COMPONENTS CAS NUMBER
Epoxy Resin 25068-38-6 NE NE 80-100 NO
Substances listed are present in concentration of 1% or greater, or 0.1% if
cited as a potential Carcinogen in the OSHA hazards communication standard.
Where proprietary ingredient is listed, the identity is available as provided
in 29 CFR 1910.1200.
NE - Not Established
SECTION 3: PHYSICAL/CHEMICAL CHARACTERISTICS
Above 400潞 F
BOILING RANGE
Approx. 3.5 (Air = 1)
VAPOR DENSITY
Less than 1 mm Hg @ 100潞 F
VAPOR PRESSURE
0.00
VOC
Very slight
SOLUBILITY IN WATER
clear liquid with a mild, pleasant
APPEARANCE AND ODOR
aroma
1.16
SPECIFIC GRAVITY (H20=1)
SECTION 4: FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: >200潞 F
METHOD USED: Closed Cup
FLAMMABLE LIMITS IN AIR BY VOLUME LOWER: Not determined
UPPER: Not determined
EXTINGUISHING MEDIA: Foam, dry chemical CO 2
OSHA FLAMMABILITY CLASSIFICATION: Combustible liquid, Class III A
SPECIAL FIRE FIGHTING PROCEDURES: Decomposition and/or products of combustion
may be toxic. Use self contained breathing equipment.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Decomposition and combustion products may
be toxic.
SECTION 5: REACTIVITY DATA
STABILITY: Normally Stable
CONDITIONS TO AVOID: Elevated temperatures.
INCOMPATIBILITY (MATERIALS TO AVOID): Avoid contact with strong oxidizing
agents, strong acids, strong bases. Mixing large quantities ( 1 gallon)
with amines or epoxy hardeners can cause heat build-up and hazardous
reaction.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: Carbon Monoxide, Carbon Dioxide,
Phenolic Derivatives.
HAZARDOUS POLYMERIZATION: Will not occur.
Product #100 A- Page1 of 3
SECTION 6: HEALTH HAZARD DATA
HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
INHALATION: Exposure to vapors at elevated temperatures may cause
irritation to respiratory tract and difficulty breathing.
EYE: May cause irritation to the eyes.
SKIN: A single exposure to the skin is unlikely to result in harm.
SKIN ABSORPTION: Repeated exposure to the skin can cause sensitization.
INGESTION: Oral toxicity is low. No hazards expected from normal
industrial exposure.
HEALTH HAZARDS (ACUTE AND CHRONIC):
CARCINOGENICITY:
NTP CARCINOGEN: NO IARC MONOGRAPHS: NO OSHA REGULATED: NO
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: Allergy, Eczema, or skin
conditions.
EMERGENCY AND FIRST AID PROCEDURES:
EYES: Flush at once with potable water for at least 15 minutes.
SKIN: Wash with soap and warm water. Remove contaminated clothes. Wash
before reuse. Destroy contaminated shoes.
INGESTION: Not likely to occur in normal handling. Give large quantities
of water and get medical attention.
INHALATION: Remove to fresh air. Administer oxygen if breathing is
difficult.
SECTION 7: PRECAUTIONS FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Avoid contact.
Soak up with clay or other absorbent material. Place in covered container
for disposal.
WASTE DISPOSAL METHOD: Dispose in an approved incinerator or an approved
landfill.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Avoid contact.
OTHER PRECAUTIONS: Keep containers tightly closed when not in use. If
mixture of A and B are allowed to remain in the mixing vessel past the pot
life deadline, heat and a strong reaction will result. Grinding or other
abrasive action to cured film may develop Micro crystalline Silica dust.
Wear a dust mask during such operations.
SECTION 8: CONTROL MEASURES
RESPIRATORY PROTECTION: Avoid breathing vapor mist or spray.
VENTILATION: Use with good ventilation.
PROTECTIVE GLOVES: Wear impervious gloves.
EYE PROTECTION: Wear splash-proof chemical goggles.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Provide eye fountain and safety
shower.
WORK/HYGIENIC PRACTICES: Wash hands thoroughly after use, before eating or
smoking. Store in a cool, dry area.
Product #100 A - Page 2 of 3
SECTION 9: REGULATORY INFORMATION
SARA TITLE III SECTION 313: Unless shown below, this product does not contain
the following toxic chemicals subject to the reporting requirements of
section 313 of the Emergency Planning and Community Right to Know Act of
1986 and of 40 CFR 372:
CAS # Chemical Name Percent by Weight
None
PROP 65 (CARCINOGEN): Unless shown below, this product does not contain
chemicals known to the state of California to cause cancer.
CAS # Chemical Name Percent by Weight
None
PROP 65 (TERATOGENIC): Unless shown below, this product does not contain
chemicals known to the state of California to cause birth defects or other
reproductive harm.
CAS # Chemical Name Percent by Weight
None
PROP 65 (CARCINOGENIC & TERATOGENIC): Unless shown below, this product does
not contain chemicals known to the state of California to cause cancer or
birth defects or other reproductive harm.
CAS # Chemical Name Percent by Weight
None
HAZARDOUS WASTE INFORMATION: Unless shown below, this product is not a
hazardous waste according to definitions found in CFR-40.
STATE OF MICHIGAN CRITICAL MATERIALS: Unless shown below, this product does
not contain ingredients appearing on the State of Michigan Critical
Materials List.
CAS # Chemical Name Percent by Weight
None
D.O.T. PROPER SHIPPING NAME: Synthetic Resin Liquid
PROPER SHIPPING NAME: Synthetic Resin Liquid
HAZARD CLASS: non-hazardous
UN/NA ID NUMBER:
SECTION 10: DISCLAIMER
Data and recommendations presented herein are based upon our and other
researchers and are believed to be accurate. The products discussed are
distributed without warranty (expressed or implied) and the customer shall
make his own determination of suitability for his particular purpose.
Product #100 A - Page 3 of 3
MATERIAL SAFETY DATA SHEET
PRODUCT NAME: EPOXYSYSTEMS鈥? PRODUCT #100 PART B HMIS CODES: H F R P
PRODUCT CODE: Product #100 Part B 210B
SECTION 1: MANUFACTURER IDENTIFICATION
MANUFACTURER'S NAME: EPOXY SYSTEMS, INC.
ADDRESS: 9370 SW 208th Circle
Dunnellon, FL 34431
EMERGENCY NUMBER: 1-800-633-8253 DATE PRINTED: 07/25/05
INFORMATION NUMBER: 1-352-489-1666 PREPARER: N. LAMBERT
SECTION 2: HAZARDOUS INGREDIENTS
ACGIH
OSHA PEL TLV WT % CARCINOGEN
HAZARDOUS COMPONENTS CAS NUMBER
Polyamine Resin Adduct
Emulsion Mixture NE NE 40-60 NO
Titanium Dioxide 13463-67-7 NE NE 1-10 NO
Silica 14808-60-78 0.01 NE 30-40 NO
Substances listed are present in concentration of 1% or greater, or 0.1% if
cited as a potential Carcinogen in the OSHA hazards communication standard.
Where proprietary ingredient is listed, the identity is available as provided
in 29 CFR 1910.1200.
NE - Not Established
SECTION 3: PHYSICAL/CHEMICAL CHARACTERISTICS
Above 400潞 F
BOILING RANGE
Approx. 3.5 (Air = 1)
VAPOR DENSITY
Less than 1 mm Hg @ 100潞 F
VAPOR PRESSURE
0.00
VOC
Very slight
SOLUBILITY IN WATER
opaque yellow liquid with a mild,
APPEARANCE AND ODOR
amine odor
2.19
SPECIFIC GRAVITY (H20=1)
SECTION 4: FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: NA
FLAMMABLE LIMITS IN AIR BY VOLUME - LOWER: 1.3%
UPPER: 6.0%
EXTINGUISHING MEDIA: Not Applicable
OSHA FLAMMABILITY CLASSIFICATION: Not Applicable
SPECIAL FIRE FIGHTING PROCEDURES: Full protective equipment including self
contained breathing apparatus should be used. Water spray may be
ineffective. If water is used, for nozzles are preferable. Water may be
used to cool closed containers to prevent build up and possible auto
ignition or explosion when exposed to extreme heat.
UNUSUAL FIRE AND EXPLOSION HAZARDS: During Emergency conditions overexposure
to decomposition products may cause a health hazard. Symptoms may not be
immediately apparent. Obtain medical attention. Closed containers may
explode (due to the build up of steam pressure) when exposed to extreme
heat.
Product #100 B 鈥? Page 1 of 3
SECTION 5: REACTIVITY DATA
STABILITY: This product is stable under normal storage conditions.
CONDITIONS TO AVOID: Elevated temperatures.
INCOMPATIBILITY (MATERIALS TO AVOID): Amines Peroxides and Oxidizers
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: Thermal decomposition and partial
combustion may produce hazardous fumes which may contain the following
materials: Carbon Monoxides
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
SECTION 6: HEALTH HAZARD DATA
HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
INHALATION: Acute: May cause headache and nausea.
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Possible
primary irritant. (Material is slightly alkaline). Eye Contact: Primary
irritant.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
HEALTH HAZARDS (ACUTE AND CHRONIC): Chronic: reports have associated repeated
and prolonged occupational overexposure to solvents with permanent brain
and nervous system damage. Intentional misuse by deliberately
concentrating and inhaling the contents may be harmful or fatal.
Overexposure to components of this material has been suggested to cause
health effects to the following organs: eyes, skin, respiratory system
(nose, throat, and lungs), liver, kidney, digestive tract, spleen, blood.
CARCINOGENICITY: NTP CARCINOGEN: IARC MONOGRAPHS: OSHA
REGULATED:
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: persons with impaired
lung functions, asthma-like conditions, or skin disorders may experience
difficulties while using this product.
PRIMARY ROUTE(S) OF ENTRY: Inhalation dermal
EMERGENCY AND FIRST AID PROCEDURES:
EYES: Splash. Flush immediately with large amounts of water for at least
15 minutes. Take to a physician for medical treatment.
SKIN: Splash. Remove with mineral spirits then wash with soap and water.
Remove contaminated clothing. Consult a physician.
VAPORS: Remove from exposure. Restore breathing. Keep warm and quiet.
Notify a physician.
Product #100 B 鈥? Page 2 of 3
SECTION 7: PRECAUTIONS FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Contain and
remove with inert absorbent and non-sparking tools.
WASTE DISPOSAL METHOD: Dispose in accordance with local, state, and federal
regulations. Incinerate in approved facility. Do not incinerate closed
containers.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Do not store above 120 F.
Close container after each use. Store large quantities only in buildings
designed to comply with OSHA 1910.106. Use approved grounding procedures
when pouring or pumping. Never use pressure to empty drums. Drum is not a
pressure vessel.
OTHER PRECAUTIONS: Do not take internally. This material is electrically
conductive. Do not apply by electrostatic spray equipment unless the
equipment has been modified and intended f or the application of conductive
coatings. IMPORTANT! This product must be blended with other components
before it can be used. Before opening the package, consult all label
warnings and material safety data sheets. Follow all precautions.
Mixtures will have hazards of all components. Volatile of this product are
principally water. Boiling range given in Section III is for hazardous
volatile organic solvents. A higher boiling non hazardous solvent may be
present.
SECTION 8: CONTROL MEASURES
RESPIRATORY PROTECTION: In restricted areas use approved chemical-mechanical
respirator filters to remove both particles and vapor. In confined areas
use approved respirators with external air supply.
VENTILATION: Provide local exhaust ventilation sufficient to insure a vapor
concentration well below TLV and LEL in section II.
PROTECTIVE GLOVES: Required (Neoprene or Nitrile Rubber). Non-permeable
gloves recommended (latex, rubber, etc.)
EYE PROTECTION: OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Use safety eye wear
designed to protect against splash of liquids.
OTHER PROTECTIVE EQUIPMENT: Prevent prolonged skin contact with contaminated
clothing.
WORK/HYGIENIC PRACTICES: Wash hands before eating, smoking, or using
washroom.
SECTION 9: REGULATORY INFORMATION
D. O. T. PROPER SHIPPING NAME: Water Based Solution, Non-Hazardous
PROPER SHIPPING NAME: Water Based Solution, Non-Hazardous
UN/NA ID NUMBER:
SECTION 10: DISCLAIMER
Data and recommendations presented herein are based upon our and other
researchers and are believed to be accurate. The products discussed are
distributed without warranty (expressed or implied) and the customer shall
make his own determination of suitability for his particular purpose.
Product #100 B 鈥? Page 3 of 3
|