Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: mudmaster_ca---max_gel_msds.asp
                                      MATERIAL SAFETY DATA SHEET
10618 MAX GEL* 12/17/2004
MSDS NO. Trade Name: Revision Date:
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
MAX GEL*
Trade Name:
Mixture
Chemical Family:
Oil well drilling fluid additive.
Product Use:
281-561-1600
Emergency Telephone (24 hr.):

M-I HDD MINING & WATERWELL
Supplied by:
A Business Unit of M-I L.L.C.
P.O. Box 42842
Houston, TX 77242
www.drilling-fluids.com

281-561-1512
Telephone Number:
Joanne Galvan, Product Safety Specialist
Contact Person:

4
Revision Number:

HMIS Rating
Health: 1* 0 0 PPE: E
Flammability: Physical Hazard:

HMIS Key: 4=Severe, 3=Serious, 2=Moderate, 1=Slight, 0=Minimal Hazard. *Chronic effects - See Section 11. See
Section 8 for Personal Protective Equipment recommendations.

2. HAZARDS IDENTIFICATION
Caution! May cause eye, skin, and respiratory tract irritation. Long term inhalation of
Emergency Overview:
particulates may cause lung damage. Cancer hazard. Contains crystalline silica
which may cause cancer.

Canadian Classification:
Not regulated D2A
UN PIN No: WHMIS Class:

Powder Odorless Tan to grey
Physical Odor: Color:
State:

Potential Health Effects:

Acute Effects

May cause mechanical irritation
Eye Contact:
May cause mechanical irritation. Long term contact can cause skin dryness.
Skin Contact:
May cause mechanical irritation.
Inhalation:
May cause gastric distress, nausea and vomiting if ingested.
Ingestion:


See Section 11 - Toxicological Information.
Carcinogenicity & Chronic
Effects:
Eyes. Dermal (skin) contact. Inhalation.
Routes of Exposure:
MATERIAL SAFETY DATA SHEET
Trade Name: MAX GEL*
MSDS NO. 10618 Revision Date: 12/17/2004 Page 2/6
Target Organs/Medical Eyes. Skin. Respiratory System.
Conditions Aggravated by
Overexposure:

3. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient CAS No. Wt. % Comments:
Bentonite 1302-78-9 80 - 95 No comments.
Silica, crystalline, quartz 14808-60-7 2 - 15 No comments.
Gypsum (Calcium sulfate) 13397-24-5 0-1 No comments.
(CAS 7778-18-9 also
applies.)
Silica, crystalline, Tridymite 15468-32-3 0-1 No comments.

4. FIRST AID MEASURES
Eye Contact: Promptly wash eyes with lots of water while lifting eye lids. Continue to rinse for at
least 15 minutes. Get medical attention if any discomfort continues.

Skin Contact: Wash skin thoroughly with soap and water. Remove contaminated clothing and
launder before reuse. Get medical attention if any discomfort continues.

Inhalation: Move person to fresh air. If not breathing, give artificial respiration. If breathing is
difficult, give oxygen. Get medical attention.

Ingestion: Dilute with 2 - 3 glasses of water or milk, if conscious. Never give anything by mouth
to an unconscious person. If signs of irritation or toxicity occur seek medical
attention.
General Notes: Persons seeking medical attention should carry a copy of this MSDS with them.

5. FIRE FIGHTING MEASURES
Flammable Properties

Flash Point: F (C): NA
Flammable Limits in Air - Lower (%): NA
Flammable Limits in Air - Upper (%): NA
Autoignition Temperature: F (C): NA
Flammability Class: NA
Other Flammable Properties: ND
Extinguishing Media: This material is not combustible. Use extinguishing media appropriate for
surrounding fire.

Protection Of Fire-Fighters:

Special Fire-Fighting Procedures: Do not enter fire area without proper personal protective equipment, including
NIOSH/MSHA approved self-contained breathing apparatus. Evacuate area and fight fire from a safe distance. Water
spray may be used to keep fire-exposed containers cool. Keep water run off out of sewers and waterways.

Hazardous Combustion Products: Not determined.

6. ACCIDENTAL RELEASE MEASURES
Personal Precautions: Use personal protective equipment identified in Section 8.

Spill Procedures: Evacuate surrounding area, if necessary. Wet product may create a slipping hazard.
Contain spilled material. Avoid the generation of dust. Sweep, vacuum, or shovel
and place into closable container for disposal.

Environmental Precautions: Waste must be disposed of in accordance with federal, state and local laws. Do not
allow to enter sewer or surface and subsurface waters.
MATERIAL SAFETY DATA SHEET
Trade Name: MAX GEL*
MSDS NO. 10618 Revision Date: 12/17/2004 Page 3/6


7. HANDLING AND STORAGE
Handling: Put on appropriate personal protective equipment. Avoid contact with skin and eyes.
Avoid generating or breathing dust. Product is slippery if wet. Use only in a well
ventilated area. Wash thoroughly after handling.

Storage: Store in dry, well-ventilated area. Keep container closed. Store away from
incompatibles. Follow safe warehousing practices regarding palletizing, banding,
shrink-wrapping and/or stacking.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Limits (TLV & PEL - 8H TWA):

Ingredient CAS No. Wt. % ACGIH TLV OSHA PEL Other Notes
Bentonite 1302-78-9 80 - 95 NA NA NA (1)
2 - 15 0.05 mg/m3 see Table Z-3 NIOSH: 0.05
Silica, crystalline, quartz 14808-60-7 (R)
mg/m3 TWA
(10H day/40H
wk)
10 mg/m3 15 mg/m3
Gypsum (Calcium sulfate) 13397-24-5 0-1 NA None
(CAS 7778-18-9 also (total); 5
mg/m3
applies.)
(respirable)
0 - 1 0.05 mg/m3 see Table Z-3
Silica, crystalline, Tridymite 15468-32-3 NA (R)

Notes
(1) Control as an ACGIH particulate not otherwise specified (PNOS): 10 mg/m3 (Inhalable); 3 mg/m3 (Respirable) and an
OSHA particulate not otherwise regulated (PNOR): 15 mg/m3 (Total); 5 mg/m3 (Respirable).
(R) Respirable fraction (ACGIH);
Table Z-3: PEL for Mineral Dusts containing crystalline silica are 10 mg/m3 / (%SiO2+2) for quartz and 1/2 the calculated
quartz value for cristobalite and tridymite.

Engineering Controls: Use appropriate engineering controls such as, exhaust ventilation and process enclosure, to
ensure air contamination and keep workers exposure below the applicable limits.

Personal Protection Equipment

Eye/Face Protection: Dust resistant safety goggles.

Skin Protection: Wear appropriate clothing to prevent repeated or prolonged skin contact. Chemical
resistant gloves recommended for prolonged or repeated contact. Use protective
gloves made of: Nitrile. Neoprene.

Respiratory Protection: Use at least a NIOSH-approved N95 half-mask disposable or reuseable particulate
respirator (dusk mask).
In work environments containing oil mist/aerosol, use at least NIOSH-approved P95
half-mask disposable or reuseable particulate respirator.
For exposure exceeding 10 x PEL use a NIOSH-approved N100 Particulate
Respirator.

Refer to Exposure Limits table (Section 8) for component specific respiratory
protection recommendations.

General Hygiene Considerations: Work clothes should be washed separately at the end of each work day. Disposable
clothing should be discarded, if contaminated with product.
MATERIAL SAFETY DATA SHEET
Trade Name: MAX GEL*
MSDS NO. 10618 Revision Date: 12/17/2004 Page 4/6
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: Tan to grey
Odor: Odorless
Physical State: Powder
pH: ND
Specific Gravity (H2O = 1): 2.3 - 2.6
Solubility (Water): Insoluble
Melting/Freezing Point: ND
Boiling Point: ND
Vapor Pressure: NA
Vapor Density (Air=1): NA
Evaporation Rate: NA
Odor Threshold(s): ND



10. STABILITY AND REACTIVITY
Chemical Stability: Stable
Conditions to Avoid: ND
Materials to Avoid: ND.
Hazardous Decomposition For thermal decomposition products, see Section 5.
Products:
Hazardous Polymerization: Will not occur

11. TOXICOLOGICAL INFORMATION
Component Toxicological Data: Any adverse component toxicological effects are listed below. If no effects are listed,
no such data were found.

Ingredient Component Toxicological Summary
Silica, crystalline, Crystalline silica is the most widely occurring of all minerals. The most common form of silica is
quartz sand. The International Agency for Research on Cancer (IARC) has designated crystalline silica
in the form of quartz or cristobalite a Group 1 (carcinogenic to humans). This designation was
based on an increased risk of lung cancer among crystalline silica exposed workers. IARC did
note that carcinogenicity of crystalline silica in humans was not detected in all industrial
circumstances studied. Further, carcinogenicity of crystalline silica may be dependent on
inherent characteristics of the crystalline silica or external factors affecting its biological activity or
distribution of polymorphs. (IARC Vol. 68, 1997, p. 41).
The National Toxicology Program (NTP) classifies crystalline silica as "reasonably anticipated to
cause cancer in humans" (6th Annual Report on Carcinogens, 1991). Long term inhalation of
crystalline silica can also result in the lung disease, silicosis. Symptoms of this disease include
coughing and shortness of breath. (NJ HSFS, January 1996)

Product Toxicological Information:
Long term inhalation of particulate can cause irritation, inflammation and/or permanent injury to the lungs. Illnesses such
as pneumoconiosis ("dusty lung"), pulmonary fibrosis, chronic bronchitis, emphysema and bronchial asthma may develop.


12. ECOLOGICAL INFORMATION
Product Ecotoxicity Data: Contact M-I Environmental Affairs Department for available product ecotoxicity data.

Biodegration: ND
Bioaccumulation: ND
Octanol/Water Partition ND
Coefficient:
MATERIAL SAFETY DATA SHEET
Trade Name: MAX GEL*
MSDS NO. 10618 Revision Date: 12/17/2004 Page 5/6
13. DISPOSAL CONSIDERATIONS
Waste Classification: ND

Waste Management: Under U.S. Environmental Protection Agency (EPA) Resource Conservation and
Recovery Act ( RCRA), it is the responsibility of the user to determine at the time of
disposal, whether the product meets RCRA criteria for the hazardous waste. This is
because product uses, transformations, mixtures, processes, etc., may render the
resulting materials hazardous. Empty containers retain residues. All labeled
precautions must be observed.

Disposal Method: Recover and reclaim or recycle, if practical. Should this product become a waste,
dispose of in a permitted industrial landfill. Ensure that the containers are empty by
the RCRA criteria prior to disposal in a permitted industrial landfill.

14. TRANSPORT INFORMATION
U.S. DOT Shipping Description: Not regulated for transportation by DOT, TDG, IMDG,
ICAO/IATA.

Canada TDG Shipping Description: Not regulated.
UN PIN No: Not regulated

IMDG Shipping Description: Not regulated.

ICAO/IATA Shipping Description: Not regulated.

15. REGULATORY INFORMATION
U.S. Federal and State Regulations

SARA 311/312 Hazard Catagories:Delayed (chronic) health hazard.

SARA 302/304, 313; CERCLA RQ, Note: If no components are listed below, this product is not subject to the referenced
California Proposition 65: SARA and CERCLA regulations and is not known to contain a Proposition 65 listed
chemical at a level that is expected to pose a significant risk under anticipated use
conditions.

Ingredient SARA 302 SARA 313 CERCLA CA 65 CA 65 CA 65 CA 65
/ TPQs RQ Cancer Dev. Tox. Repro. F Repro. M
Silica, crystalline, quartz --- --- --- X --- --- ---
Silica, crystalline, Tridymite --- --- --- X --- --- ---

International Chemical Inventories

Australia AICS - Components are listed or exempt from listing.
Canada DSL - Components are listed or exempt from listing.
China Inventory - Components are listed or exempt from listing.
European Union EINECS - Components are listed or exempt from listing.
Japan METI ENCS - Components are listed or exempt from listing.
Korea TCCL ECL - Components are listed or exempt from listing.
Philippine PICCS - Components are listed or exempt from listing.
U.S. TSCA - Components are listed or exempt from listing.
U.S. TSCA - No components are subject to TSCA 12(b) export notification requirements.


Canadian Classification:

Controlled Products Regulations Statement: This product has been classified in accordance with the hazard criteria of the
CPR and the MSDS contains all the information required by the CPR.
MATERIAL SAFETY DATA SHEET
Trade Name: MAX GEL*
MSDS NO. 10618 Revision Date: 12/17/2004 Page 6/6

WHMIS Class: D2A

16. OTHER INFORMATION
The following sections have been revised: 1, 2, 3, 16

NA - Not Applicable, ND - Not Determined.

*A mark of M-I L.L.C.

Disclaimer:
MSDS furnished independent of product sale. While every effort has been made to accurately describe this product, some of the data are obtained from
sources beyond our direct supervision. We can not make any assertions as to its reliability or completeness; therefore, user may rely on it only at user麓s
risk. We have made no effort to censor or conceal deleterious aspects of this product. Since we cannot anticipate or control the conditions under which
this information and product may be used, we make no guartantee that the precautions we have suggested will be adequate for all individuals and/or
situations. It is the obligation of each user of this product to comply with the requirements of all applicable laws regarding use and disposal of this
product. Additional information will be furnished upon request to assist the user; however, no warranty, either expressed or implied, nor liability of any
nature with respect to this product or to the data herein is made or incurred hereunder.

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
mudmaster_ca---bentonite_abi_hi_yield_msds.asp 14808-60-7
mudmaster_ca---bentonite_abi_untreated_msds.asp 1302-78-9 14808-60-7
mudmaster_ca---bicarbonate_of_soda_msds.asp 144-55-8
mudmaster_ca---bio-clear_1000_msds.asp N/A
mudmaster_ca---biovis_msds.asp N/A
mudmaster_ca---biozan_msds.asp 96949-22-3
mudmaster_ca---calcium_carbonate_all_types_msds.asp 471-34-1
mudmaster_ca---caustic_potash_msds.asp 1310-58-3
mudmaster_ca---caustic_soda_msds.asp 1310-73-2
mudmaster_ca---chembreak_ebs_msds.asp 77-92-9
mudmaster_ca---chembreak_eca_msds.asp 77-92-9 9000-90-2
mudmaster_ca---citric_acid_msds.asp 77-92-9
mudmaster_ca---clean_up_msds.asp 7732-18-5 111-42-2
mudmaster_ca---defoamer_a_msds.asp 67-63-0 6834-92-0
mudmaster_ca---defoam_x_msds.asp N/A
mudmaster_ca---drilling_detergent_msds.asp 67-56-1
mudmaster_ca---drilling_detergent_mtl_msds.asp 67-56-1
mudmaster_ca---drilstar_ht_msds.asp 9005-25-8
mudmaster_ca---driscal_d_polymer_msds.asp N/A
mudmaster_ca---drispac_liquid_msds.asp 64742-47-8
mudmaster_ca---drispac_plus_regular_msds.asp N/A
mudmaster_ca---drispac_plus_sl_msds.asp N/A
mudmaster_ca---enviroplug_msds.asp N/A
mudmaster_ca---eze_slide_msds.asp N/A
mudmaster_ca---fed_pac_r_info.asp N/A
mudmaster_ca---fed_pac_r_msds.asp 9004-32-4
mudmaster_ca---fed_pac_ul_msds.asp 9004-32-4
mudmaster_ca---fed_rheosmart_msds.asp 14808-60-7
mudmaster_ca---fed_seal_msds.asp N/A
mudmaster_ca---fiber_fluid_msds.asp N/A
mudmaster_ca---filtravis_msds.asp N/A
mudmaster_ca---fl-2_msds.asp N/A
mudmaster_ca---foam_check_msds.asp N/A
mudmaster_ca---green-cide_25g_msds.asp 111-30-8
mudmaster_ca---guar_gum_msds.asp N/A
mudmaster_ca---gypsum_msds.asp N/A
mudmaster_ca---hrp_msds.asp 143-22-6 108-32-7
mudmaster_ca---hyperdrill_ad_855_msds.asp N/A
mudmaster_ca---hyperdrill_af_204_rd_msds.asp N/A
mudmaster_ca---hyperdrill_af_207_rd_msds.asp N/A
mudmaster_ca---hyperdrill_af_247_rd_msds.asp N/A
mudmaster_ca---hyperdrill_cp_905_msds.asp N/A
mudmaster_ca---kwik_seal_msds.asp N/A
mudmaster_ca---lignite_msds.asp 14808-60-7
mudmaster_ca---lime_processed_msds.asp 1305-78-8
mudmaster_ca---magma_fiber_msds.asp N/A
mudmaster_ca---magnesium_oxide_msds.asp 1309-48-4 1305-78-8
mudmaster_ca---max_gel_msds.asp N/A
mudmaster_ca---mtl_power_clean_2000_msds.asp 5989-27-5 1310-58-3 51811-79-1 68412-54-4
mudmaster_ca---mtl_shure_shale_msds.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC