LIQUID WRENCH SUPER PENETRANT (POUR)
Revision Date: 2004/07/14
Section 1: PRODUCT INFORMATION
Chemical family: Hydrocarbon mixture.
Supplier: Radiator Specialty Co., of Canada
1711 Aimco Blvd.
Mississauga, Ontario
L4W 1H7.
Emergency Phone Number: Canutec 613鈭?996鈭?6666.
Manufacturer: Refer to supplier.
TDG classification:
TOXIC LIQUID, ORGANIC, N.O.S. (2鈭抌utoxy ethanol)
UN2810
Class 6.1
PG III.
WHMIS classification:
B3, D1A, D2B.
DSL status: The substance(s) listed in section 2 appear on the Domestic Substances List.
Section 2: HAZARDOUS INGREDIENTS
C.A.S. CONCENTRATION % Ingredient Name T.L.V. LD/50 LC/50
111鈭?76鈭?2 7鈭?13 2鈭払UTOXY ETHANOL 20 PPM 470 MG/KG 450 PPM/4H
RAT ORAL RAT INHALATION
700 PPM/7H
1167 MG/KG MOUSE INHALATION
MOUSE ORAL 3380 MG/M3/7H
MOUSE INHALATION
300 MG/KG 2900 MG/M3/7H
RABBIT ORAL RAT INHALATION
220 MG/KG
RABBIT DERMAL
64742鈭?52鈭?5 7鈭?13 HYDROTREATED HEAVY NAPHTHENIC PETROLEUM NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE
Section 2A: ADDITIONAL INGREDIENT INFORMATION
Note: (supplier).
CAS# 64742鈭?52鈭?5: LD50 >5000 mg/kg rat oral.
Cas# 64742鈭?52鈭?5 LD50 >5000 mg/kg rabbit dermal.
Cas# 111鈭?76鈭?2 LD50 100 mg/kg rabbit dermal.
Section 3: PHYSICAL DATA
Physical state: Liquid.
Appearance & odor: Dark
Petroleum odour.
Odor threshold (ppm): Not available.
L104C 鈭? LIQUID WRENCH SUPER PENETRANT (POUR) 1/5
Vapour pressure (mmHg): Not available.
Vapour density (air=1): Not available.
Volatiles (%)
By volume: Not available.
Evaporation rate
Not available.
(butyl acetate = 1):
Boiling point (掳C): 160
Freezing point (掳C): Not available.
pH: Not available.
Specific gravity @ 20 掳C: 0.894
Solubility in water (%): Insoluble.
Coefficient of water\oil dist.: Not available.
VOC: Not available.
Section 4: FIRE & EXPLOSION DATA
Flammability: Combustible.
Conditions of flammability: Heat, sparks and open flames.
Extinguishing media: Dry chemical.
Alcohol foam.
Water fog.
Carbon dioxide.
Water mist.
Special procedures: Firefighters should wear adequate protective gear.
Wear a self contained breathing apparatus.
Auto鈭抜gnition temperature: Not available.
Flash point (掳C), method: Tag Closed Cup.
60鈭?93.3
Lower flammability
Not available.
limit (% vol):
Upper flammability
Not available.
limit (% vol):
Explosion Data
Sensitivity to static discharge: Not available.
Sensitivity to mechanical impact: Not available.
Hazardous combustion products: Oxides of carbon (CO, CO2).
Sulfur trioxide (SO3).
Reactive hydrocarbons.
Explosive power: Not available.
L104C 鈭? LIQUID WRENCH SUPER PENETRANT (POUR) 2/5
Section 5: REACTIVITY DATA
Chemical stability: Stable under normal conditions.
Conditions of instability: Explosive peroxides may form.
Hazardous polymerization: Will not occur.
Incompatible substances: Oxidizing agents.
Bases
Hazardous decomposition
See hazardous combustion products.
products:
Section 6: TOXICOLOGICAL PROPERTIES
Route of entry: Eye contact, skin contact, skin absorption, inhalation and ingestion.
Effects of acute exposure
Eye contact: May cause moderate to severe irritation.
Skin contact: May cause severe irritation.
May be absorbed through the skin and produce effects similar to those caused by
inhalation.
Inhalation: May affect the central nervous system.
May cause pulmonary edema.
May cause irritation of the respiratory tract.
May cause headache, dizziness and nausea.
May cause unconsciousness and even death.
May cause nose and throat irritation.
May cause blood damage.
Ingestion: May be harmful or fatal if swallowed.
May cause nausea, vomiting and diarrhea.
Causes irritation to mouth, throat and stomach.
Aspiration of liquid into lungs may cause chemical pneumonitis which can be fatal.
May lead to coma.
Effects of chronic exposure: Pre鈭抏xisting eye, skin and respiratory disorders may be aggravated.
May cause liver damage.
May cause anemia.
Prolonged or repeated overexposure may cause drying and cracking of the skin
(dermatitis).
LD50 of product, species & route: Not available for mixture, see the ingredients section.
LC50 of product, species & route: Not available for mixture, see the ingredients section.
Exposure limit of material: Not available for mixture, see the ingredients section.
Sensitization to product: None known.
Carcinogenic effects: None of the ingredients appearing in Section 2 are listed as carcinogens.
Reproductive effects: None known.
Teratogenicity: None known.
Mutagenicity: None known.
Synergistic materials: Not available.
L104C 鈭? LIQUID WRENCH SUPER PENETRANT (POUR) 3/5
Section 7: PREVENTATIVE MEASURES
Precautionary Measures
Gloves/Type:
Impervious gloves.
Respiratory/Type: If TLV is exceeded.
Wear a NIOSH approved respirator.
Eye/Type:
Splash proof chemical goggles.
Footwear/Type: Safety shoes per local regulations.
Clothing/Type: As required to prevent skin contact.
Other/Type: Eye wash facility should be in close proximity.
Emergency shower should be in close proximity.
Ventilation requirements: Adequate ventilation.
Leak/Spill: Contain the spill.
Absorb with inert material.
Prevent entry into drains, sewers, and other waterways.
Stop leak if without risk.
Use a non鈭抍ombustible absorbent material.
Ventilate area.
Wear appropriate protective equipment.
Put in appropriate container.
Notify the appropriate authorities as required.
Waste disposal: Dispose in accordance with local, provincial/state, and federal regulations.
Handling procedures and Keep away from heat, sparks, and open flame.
equipment: Avoid breathing vapors/mists.
Use adequate ventilation.
Wear personal protective equipment appropriate to task.
Wash clothing before re鈭抲se.
Wash thoroughly after handling.
Avoid smoking in area of use.
Keep out of reach of children.
Avoid contact with skin, eyes and clothing.
Wear suitable protective clothing.
Do not wear contact lenses.
Storage requirements: Store away from incompatible materials.
Keep containers closed when not in use.
Keep out of direct sunlight.
Keep away from ignition sources.
Store in a cool, dry and well ventilated area.
Inspect periodically for damage.
L104C 鈭? LIQUID WRENCH SUPER PENETRANT (POUR) 4/5
TDG classification:
TOXIC LIQUID, ORGANIC, N.O.S. (2鈭抌utoxy ethanol)
UN2810
Class 6.1
PG III.
Special shipping information: See transportation information.
Section 8: FIRST AID MEASURES
Skin contact: Obtain immediate medical attention.
Immediately flush skin with plenty of water and soap for 15 minutes while
removing contaminated clothing and shoes.
Eye contact: Flush with water for at least 15 minutes.
Obtain emergency medical attention.
Inhalation: Remove victim to fresh air. If breathing is difficult administer oxygen. If not
breathing, have qualified person give artificial respiration. Obtain medical attention.
Ingestion: Guard against aspiration of liquids into lungs.
Never give anything by mouth to an unconscious person.
Do not administer epinephrine or adrenaline.
Do not induce vomiting, seek immediate medical attention.
Additional information: The above information is believed to be correct but does not purport to be all
inclusive and shall be used only as a guide. This company shall not be held liable
for any inaccuracies.
Section 9: ADDITIONAL INFORMATION
General note: This material safety data sheet was prepared from information obtained from
various sources, including product suppliers and the Canadian Center for
Occupational Health and Safety.
This MSDS was generated by Conform鈭扨lus Application Service. Visit us at www.netmsds.com.
L104C 鈭? LIQUID WRENCH SUPER PENETRANT (POUR) 5/5
|