O
Material Safety Data Sheet
166625 Level: 1
FIR No.:
US-US-5 Release Date: 2005-10-06
Version Number:
1. Product and Company Identification
Product Name: Premium Cooling System Flush
Product Code: See Attachment
Application: Engine Cooling System Cleaner
Supplier: Ford Motor Company
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Emergency Telephone: Poison Control Center: 1-800-959-3673
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
This chemical product is a preparation.
Chemical Name CAS Number Percent Hazard
Concentration Classification
64-02-8
TETRASODIUM EDTA 10-30
3. Hazards Identification
CAUTION
Health: This product may cause irritation to the eyes, respiratory system, and
skin.
Environment: Material contains a chemical which is a Hazardous Air Pollutant (HAP),
regulated by the United States Clean Air Act.
4. First-Aid Measures
Skin Contact: For skin contact, wash immediately with soap and water.
If irritation persists, get medical attention.
Eye Contact: In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Ingestion: If the material is swallowed, get immediate medical attention or advice.
5. Fire-Fighting Measures
Extinguishing Media: Alcohol foam (preferred), dry chemical, water.
6. Accidental Release Measures
Personal Precautions: Avoid skin contact with the spilled material.
Wear appropriate protective equipment and clothing during clean-up.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 5 Official Record
Application: MATS
O
Material Safety Data Sheet
166625 Level: 1
FIR No.:
US-US-5 Release Date: 2005-10-06
Version Number:
Environmental Precautions: No available information.
Methods for Cleaning Up: Absorb the spilled material with an inert absorbent (nonflammable)
material.
7. Handling and Storage
Handling:
Technical Measures: No special precautions necessary.
Precautions and Advice for Safe Avoid getting this material into contact with your eyes.
Handling: Avoid prolonged or repeated skin contact with this material.
Storage:
Technical Measures: No special precautions.
Storage Conditions: Keep the container tightly closed and in a cool, well-ventilated place.
8. Exposure Controls/Personal Protection
Personal Protective Equipment:
Use of impervious gloves is recommended, such as neoprene.
Hand Protection:
The use of nitrile-latex gloves is recommended.
Wear chemical goggles; face shield (if splashing is possible).
Eye Protection:
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 5 Official Record
Application: MATS
O
Material Safety Data Sheet
166625 Level: 1
FIR No.:
US-US-5 Release Date: 2005-10-06
Version Number:
9. Physical and Chemical Properties
1.045
Specific Gravity:
LIQUID
Physical State:
ND
Form:
NEUTRAL
Odor:
CLEAR
Color:
9.0 ASTM D1293
pH:
Temperature Range During which Changes
in Physical State Occur:
100 掳C
Boiling Point:
N. AP
Flash Point:
Explosion Properties:
N.AV
UEL:
N.AV
LEL:
N.AV
Vapor Density:
SOLUBLE IN WATER
Solubility:
N. AP
Viscosity:
ND
Evaporation Rate:
10. Stability and Reactivity
This is a stable material.
Stability:
Hazardous polymerization will not occur.
No data available.
Hazardous Decomposition Products:
11. Toxicological Information
Prolonged and/or repeated skin contact with this product may cause
Skin Contact:
irritation/dermatitis.
12. Ecological Information
No specific aquatic data available for this product.
13. Disposal Considerations
Dispose of waste material according to Local, State, Federal, and
Waste from Residues:
Provincial Environmental Regulation.
No available information.
Contaminated Packaging:
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 5 Official Record
Application: MATS
O
Material Safety Data Sheet
166625 Level: 1
FIR No.:
US-US-5 Release Date: 2005-10-06
Version Number:
14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
This product is not regulated as a dangerous good.
Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II
This product is not regulated as a dangerous good.
Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico)
This product is not regulated as a dangerous good.
International and Domestic Air Transportation - ICAO & IATA Section 4.2
This product is not regulated as a dangerous good.
International Water Transportation - IMDG Code Amendment 31-02
This product is not regulated as a dangerous good.
15. Regulatory Information
This product contains NONE of the substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372
16. Other Information
Key/Legend: N.AP = Not applicable; N.AV = not available; ND = Not determined or No data; TLV = Threshold limit value;
TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit
The following sections contain revisions OR 2
NEW statements 16
8
Preparation Information: The chemical identification and properties for this material were provided
by the manufacturer. For Canadian locations, a manufacturer's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, National Parts General
Office,MD74,29500 Plymouth Road, Livonia, MI 48150,USA.
Disclaimer: The information on this data sheet represents our current data and is
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 5 Official Record
Application: MATS
O
Material Safety Data Sheet
166625 Level: 1
FIR No.:
US-US-5 Release Date: 2005-10-06
Version Number:
Attachment
Product Code Container Size Part of Kit Kit Product Code
VC-1 22 fl. oz. (650 mL)
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 5 Official Record
Application: MATS
|