O
Material Safety Data Sheet
174980 Level: 1
FIR No.:
US-US-3 Release Date: 2008-07-16
Version Number:
1. Product and Company Identification
Specialty Power Transfer Unit Fluid
Product Name:
See Attachment
Product Code:
Gear oil
Application:
Ford Motor Company
Supplier:
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Poison Control Center: 1-800-959-3673
Emergency Telephone:
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
This chemical product is a preparation.
Chemical Name CAS Number Percent Hazard
Concentration Classification
PETROLEUM DISTILLATES, 64741-88-4 1-5 HAZCOM
SOLVENT-REFINED HEAVY RSMS_P_SOM
PARAFFINIC
3. Hazards Identification
CAUTION
Direct contact with eye causes irritation.
Health:
Causes skin irritation.
This product may cause an allergic skin reaction.
Ingestion can cause gastrointestinal irritation, nausea, vomiting and
diarrhea.
Inhalation of vapors (generated at high temperatures only) may cause
mild irri tation of the nose, throat, and respiratory tract.
Prolonged and/or repeated skin contact with this product may cause
irritation/dermatitis.
Prolonged or repeated contact with this product may dry and/or defat
the skin.
Material contains a chemical which is a Hazardous Air Pollutant (HAP),
Environment:
regulated by the United States Clean Air Act.
4. First-Aid Measures
If gas/fume/vapor/dust/mist from the material is inhaled, remove the
Inhalation:
affected person immediately to fresh air.
If irritation persists, get medical attention.
For skin contact, wash immediately with soap and water.
Skin Contact:
If irritation persists, get medical attention.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
174980 Level: 1
FIR No.:
US-US-3 Release Date: 2008-07-16
Version Number:
In case of contact with eyes, rinse immediately with plenty of water for
Eye Contact:
at least 15 minutes and seek medical attention.
If irritation persists, get medical attention.
If the material is swallowed, get immediate medical attention or advice
Ingestion:
-- Do not induce vomiting.
Do not give anything by mouth to an unconscious or convulsing person.
If the affected person is not breathing, apply artificial respiration.
Notes to a Physician:
If the affected person's breathing is difficult, give oxygen.
5. Fire-Fighting Measures
Use any media suitable for the surrounding fires.
Extinguishing Media:
Dry chemical, foam, carbon dioxide, water fog.
Use water to cool fire-exposed containers, structures, and to protect
Specific Methods:
personnel.
Upon decomposition, this product emits carbon monoxide, carbon
Specific Hazards:
dioxide and/or low molecular weight hydrocarbons.
Empty containers may retain product residue including Flammable or
Explosive vapors. Do not cut, drill, grind, or weld near full, partially full,
or empty product containers.
Fire fighters should be equipped with NIOSH-approved, self-contained
Protection of Firefighters:
breathing apparatus (SCBA) and full protective clothing.
6. Accidental Release Measures
Avoid inhalation of vapors and contact with skin and eyes.
Personal Precautions:
Provide adequate ventilation.
Wear appropriate protective equipment and clothing during clean-up.
Do not allow the spilled product to enter public drainage system or
Environmental Precautions:
open water courses.
Stop the flow of material, if this is without risk.
Methods for Cleaning Up:
Contain the discharged material.
Absorb the spilled material with an inert absorbent (nonflammable)
material.
Thoroughly wash the area after a spill or leak clean-up.
When product is used to mitigate a hazardous material, the resultant
material must be handled in the same fashion as the hazardous
material.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
174980 Level: 1
FIR No.:
US-US-3 Release Date: 2008-07-16
Version Number:
7. Handling and Storage
Handling:
Avoid the generation of oil mists.
Technical Measures:
Keep this product from heat, sparks, or open flame.
Precautions and Advice for Safe Avoid contact with skin, eyes and clothing.
Elevated temperature or mechanical action may form vapors, mist, or
Handling:
fumes which may be irritating to the eyes, nose, throat, and lungs.
Avoid breathing vapors or mist.
Avoid prolonged or repeated skin contact with this material.
Wear protective equipment during handling.
Use with adequate ventilation.
No special precautions necessary.
Storage: Technical Measures:
Store this product in a cool, dry, well-ventilated place.
Storage Conditions:
8. Exposure Controls/Personal Protection
Use adequate ventilation to control airborne concentrations below the
Engineering Measures:
exposure limits/guidelines. If user operations generate a vapor, dust,
and/or mist, use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below the
recommended exposure limits/guidelines.
Eyewash fountains and emergency showers are required.
If oil mist is generated, observe the OSHA exposure limit of 5 mg/m3
Control Parameters:
(TWA) and the ACGIH exposure limit of 5 mg/m3 (TWA) and the
ACGIH short term exposure limit (STEL) of 10 mg/m3. Ford Motor
Company recommends an exposure limit of 1.0 mg/m3.
Exposure Limits:
Chemical Name TWA References
STEL/C
20(ppm)
CYCLOHEXANONE ACGIH
50(ppm) 200(ppm) OSHA
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
174980 Level: 1
FIR No.:
US-US-3 Release Date: 2008-07-16
Version Number:
Personal Protective Equipment:
If vaporization or mist is occurring (i.e., under conditions of high
Respiratory Protection:
temperature, etc.), use an air purifying respirator (mechanical filter
with accompanying organic vapor cartridge).
The use of neoprene gloves is recommended.
Hand Protection:
The use of nitrile-latex gloves is recommended.
Wear safety glasses with side shields.
Eye Protection:
Wear chemical goggles; face shield (if splashing is possible).
Remove contaminated clothing and wash before reuse.
Skin and Body Protection:
Wash thoroughly after handling.
Hygiene Measures:
When using this material, do not eat, drink or smoke.
9. Physical and Chemical Properties
0.873 g/m鲁 @15掳C
Specific Gravity:
LIQUID
Physical State:
OIL
Odor:
BROWN
Color:
N.AP
pH:
Temperature Range During which Changes
in Physical State Occur:
230 掳C CCC
Flash Point:
Explosion Properties:
N.AV
UEL:
N.AV
LEL:
INSOLUBLE IN WATER
Solubility:
17.5-18.5@100掳C cSt
Viscosity:
N.AV
Evaporation Rate:
10. Stability and Reactivity
This is a stable material.
Stability:
Hazardous polymerization will not occur.
This product can react with oxidizing materials.
Conditions and Materials to Avoid:
Carbon monoxide, carbon dioxide, and other low molecular weight
Hazardous Decomposition Products:
hydrocarbons.
Decomposition of this product may emit oxides of sulfur.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
174980 Level: 1
FIR No.:
US-US-3 Release Date: 2008-07-16
Version Number:
11. Toxicological Information
103-24-2 DI-2-ETHYL HEXYL AZELATE
Oral, adult rat, LD50 = 8720 mg/kg
103-24-2 DI-2-ETHYL HEXYL AZELATE
Skin, adult rabbit, LD50 = 20 gm/kg
Base oil severely refined: Not carcinogenic in animal studies.
Chronic (Long Term) Toxicity:
Representative material passes IP-346, Modified Ames test, and/or
other screening tests.
12. Ecological Information
The product is biodegradable.
Persistence/Degradability:
The product is not bioaccumulating.
Ecotoxocity:
13. Disposal Considerations
Dispose of waste material according to Local, State, Federal, and
Waste from Residues:
Provincial Environmental Regulation.
No available information.
Contaminated Packaging:
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
174980 Level: 1
FIR No.:
US-US-3 Release Date: 2008-07-16
Version Number:
14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
This product is not regulated as a dangerous good.
Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II
This product is not regulated as a dangerous good.
Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico)
This product is not regulated as a dangerous good.
International and Domestic Air Transportation - ICAO & IATA Section 4.2
This product is not regulated as a dangerous good.
International Water Transportation - IMDG Code Amendment 31-02
This product is not regulated as a dangerous good.
15. Regulatory Information
Don't pollute. Conserve resources. Return used oil to collection centers.
This product contains trace amounts of chemicals (<0.01%) being listed on California Prop 65 list.
This product contains NONE of the substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372
The components of this product are listed on the TSCA Inventory
Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material
should be minimized to the greatest extent possible.
16. Other Information
Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit
value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit
HMIS and NFPA Hazard Class Information:
Health: 1 (Slight) Flammability: 1 (Slight) Physical Hazard: 0 (Least)
HMIS Hazard Class:
Health: 1 (Slight) Flammability: 1 (Slight) Instability: 0 (Least)
NFPA Hazard Class:
The following sections contain revisions OR 2
15
NEW statements.
5
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 6 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
174980 Level: 1
FIR No.:
US-US-3 Release Date: 2008-07-16
Version Number:
The chemical identification and properties for this material were provided
Preparation Information:
by the manufacturer. For Canadian locations, a manufacture's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, Diagnostic Service Center II, 1800
Fairlane Drive, Allen Park, MI 48101, USA.
The information on this data sheet represents our current data and is
Disclaimer:
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 7 / 8 Official Record
Application: MATS
O
Material Safety Data Sheet
174980 Level: 1
FIR No.:
US-US-3 Release Date: 2008-07-16
Version Number:
Attachment
Product Code Container Size Part of Kit Kit Product Code
XY-75W90-PTU 1.05 pt. (500 mL)
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 8 / 8 Official Record
Application: MATS
|