O
Material Safety Data Sheet
167146 Level: 1
FIR No.:
US-US-3 Release Date: 2005-11-18
Version Number:
1. Product and Company Identification
Product Name: Premium Fuel Injector Cleaner
Product Code: See Attachment
Application: Fuel Injector Cleaner
Supplier: Ford Motor Company
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Emergency Telephone: Poison Control Center: 1-800-959-3673
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
This chemical product is a preparation.
Chemical Name CAS Number Percent Hazard
Concentration Classification
8008-20-6
KEROSENE 30-60
222222-22-2V
LUBRIZOL 9522C 15-40
91-20-3
NAPHTHALENE 0.1-1 CAA-HAP
RQ
RSMS_D_ALL
SARA 313
3. Hazards Identification
FLAMMABLE
Health: This product is irritating to the eyes and skin.
This product may be harmful if it is swallowed.
This product is harmful by inhalation, when in contact with the skin and
if it is swallowed.
This product may be harmful or toxic by skin absorption.
Overexposure may cause central nevous system effects.
This product may cause an allergic skin reaction.
Physical and Chemical Hazards: This product is flammable.
Environment: Material contains a chemical which is a Hazardous Air Pollutant (HAP),
regulated by the United States Clean Air Act.
4. First-Aid Measures
Inhalation: If gas/fume/vapor/dust/mist from the material is inhaled, remove the
affected person immediately to fresh air.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
167146 Level: 1
FIR No.:
US-US-3 Release Date: 2005-11-18
Version Number:
Skin Contact: For skin contact, wash immediately with soap and water.
If irritation persists, get medical attention.
Eye Contact: In case of contact with eyes, rinse immediately with plenty of water for
at least 15 minutes and seek medical attention.
Ingestion: If the material is swallowed, get immediate medical attention or advice
-- Do not induce vomiting.
5. Fire-Fighting Measures
Extinguishing Media: Dry chemical, foam, carbon dioxide.
Specific Methods: Use water to dilute spills and to disperse flammable vapors.
Water may be used to cool exposed containers to prevent pressure
build-up and explosion when exposed to extreme heat.
Specific Hazards: Empty containers may retain product residue including Flammable or
Explosive vapors. Do not cut, drill, grind, or weld near full, partially full,
or empty product containers.
Fire and Explosion hazards are DANGEROUS when this material is
exposed to heat or flame.
Vapors are heavier than air and may travel along the ground to some
distant source of ignition and flash back.
Protection of Firefighters: Fire fighters should be equipped with NIOSH-approved, self-contained
breathing apparatus (SCBA) and full protective clothing.
6. Accidental Release Measures
Personal Precautions: Evacuate the area promptly. Keep upwind of the spilled material and
isolate exposure.
Avoid inhalation of vapor, fumes, dust and/or mist from the spilled
material.
Avoid skin contact with the spilled material.
Eliminate all sources of ignition or flammables that may come into
contact with a spill of this material.
Ventilate the contaminated area.
Wear appropriate protective equipment and clothing during clean-up.
Environmental Precautions: Do not allow the spilled product to enter public drainage system or
open water courses.
Methods for Cleaning Up: Contain the discharged material.
Absorb the spilled material with an inert absorbent (nonflammable)
material.
Scrape up the spilled material and transfer to a suitable container for
disposal.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
167146 Level: 1
FIR No.:
US-US-3 Release Date: 2005-11-18
Version Number:
7. Handling and Storage
Handling:
Technical Measures: Keep this product from heat, sparks, or open flame.
Precautions and Advice for Safe Avoid getting this material into contact with your skin and eyes.
Handling: Do not breathe gas/fumes/vapor/spray.
Use this product with adequate ventilation.
Storage:
Technical Measures: No special precautions.
Storage Conditions: Store this product in a cool, dry, well-ventilated place.
8. Exposure Controls/Personal Protection
Engineering Measures: Eyewash and emergency showers are recommended.
Local exhaust is suggested for use, where possible, in enclosed or
confined spaces.
Exposure Limits:
Chemical Name TWA 8 hr References
STEL/C
10(ppm)
NAPHTHALENE 15(ppm) ACGIH
10(ppm) 50(ppm) OSHA
Personal Protective Equipment:
If engineering controls do not maintain airborne concentrations to a
Respiratory Protection:
level which is adequate to protect worker health, an approved
respirator must be worn. Respirator selection, use and maintenance
should be in accordance with the requirements of OSHA Respiratory
Protection Standard 29 CFR 1910.134 and/or Canadian Standard
CSA Z94.4.
The use of nitrile-latex gloves is recommended.
Hand Protection:
Wear chemical goggles.
Eye Protection:
Remove contaminated clothing and wash before reuse.
Skin and Body Protection:
Hygiene Measures: When using this material, do not eat, drink or smoke.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
167146 Level: 1
FIR No.:
US-US-3 Release Date: 2005-11-18
Version Number:
9. Physical and Chemical Properties
0.865 H2O=1
Specific Gravity:
LIQUID
Physical State:
PETROLEUM
Odor:
CLEAR AMBER
Color:
N.AP
pH:
Temperature Range During which Changes
in Physical State Occur:
ND
Boiling Point:
35 掳C ASTM D 93
Flash Point:
N.AV
Auto-ignition Temperature:
Explosion Properties:
ND
UEL:
ND
LEL:
ND
Vapor Pressure:
ND
Vapor Density:
INSOLUBLE
Solubility:
41.7@40掳C cSt
Viscosity:
ND
Evaporation Rate:
10. Stability and Reactivity
Hazardous polymerization will not occur.
Stability:
This is a stable material.
This product may react with strong oxidizing agents (bleach--sodium
Conditions and Materials to Avoid:
hypochlorite, calcium hypochlorite, hydrogen peroxide, permanganate,
nitric acid, concentrated OXYGEN, perchlorates).
Irritating and/or toxic fumes may be emitted upon the product's
Hazardous Decomposition Products:
decomposition.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
167146 Level: 1
FIR No.:
US-US-3 Release Date: 2005-11-18
Version Number:
11. Toxicological Information
8008-20-6 KEROSENE
Oral, adult rat, LD50 = 26 gm/kg
Excessive inhalation of this material causes headache, dizziness,
Inhalation:
nausea and incoordination.
Exposure to oil mist/fume/vapor may cause respiratory tract irritation.
This product contains naphthalene. A U.S. National Toxicology Program
Chronic (Long Term) Toxicity:
(NTP) report states that a lifetime inhalation exposure to naphthalene
resulted in increases in tumors of the nose in rats. In a previous U.S.
NTP study, lifetime inhalation exposure to naphthalene increased lung
tumors in female mice. The relevance of the rodent findings to humans
is questionable.
12. Ecological Information
No specific aquatic data available for this product.
13. Disposal Considerations
Dispose of waste material according to Local, State, Federal, and
Waste from Residues:
Provincial Environmental Regulation.
No available information.
Contaminated Packaging:
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
167146 Level: 1
FIR No.:
US-US-3 Release Date: 2005-11-18
Version Number:
14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
Flammable liquids, n.o.s. (KEROSENE)
Proper Shipping Name:
UN1993
UN Number:
3
Hazard Class / Division:
III
Packing Group:
Reportable Quantity (per
packaging):
CAS Name
RQ
71-43-2 >100000 BENZENE
91-20-3 10101 NAPHTHALENE
108-88-3 >100000 TOLUENE
Regulated Quantity:
Non-Bulk Limited Quantity
Bulk
X
X
Label: FLAMMABLE LIQUID
Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II
FLAMMABLE LIQUIDS, N.O.S. (KEROSENE)
Proper Shipping Name:
UN1993
UN Number:
3
Hazard Class / Division:
III
Packing Group:
Regulated Quantity:
Non-Bulk Limited Quantity
Bulk
X
X
Label: FLAMMABLE LIQUID
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 6 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
167146 Level: 1
FIR No.:
US-US-3 Release Date: 2005-11-18
Version Number:
Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico)
LIQUIDO INFLAMABLE, N.E.P. (KEROSENE)
Proper Shipping Name:
UN1993
UN Number:
3
Hazard Class/Division:
III
Packing Group:
Regulated Quantity:
Non-Bulk Limited Quantity
Bulk
X
X
Label: FLAMMABLE LIQUID
International and Domestic Air Transportation - ICAO & IATA Section 4.2
Flammable liquids, n.o.s. (KEROSENE)
Proper Shipping Name:
UN1993
UN Number:
3
Hazard Class/Division:
III
Packing Group:
FLAMMABLE LIQUID
Label:
International Water Transportation - IMDG Code Amendment 31-02
Flammable liquids, n.o.s. (KEROSENE)
Proper Shipping Name:
UN1993
UN Number:
3
Hazard Class/Division:
35 掳C ASTM D 93
Flashpoint:
III
Packing Group:
Regulated Quantity:
Non-Bulk Limited Quantity
Bulk
X
X
Label: FLAMMABLE LIQUID
15. Regulatory Information
This product contains a toxic chemical or chemicals subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
This product contains trace amounts of chemicals (<0.01%) being listed on California Prop 65 list.
This product contains an ingredient(s) considered to be a "toxic or hazardous substance" by the Commonwealth of
Massachussetts (Massachussetts Right to Know Law).
This product contains an ingredient(s) considered to be a hazardous substance by the State of Pennsylvania
(Pennsylvania Worker and Community Right to Know Act).
This product contains an ingredients(s) considered to be a hazardous substance(s) by the State of New Jersey.
Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material
should be minimized to the greatest extent possible.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 7 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
167146 Level: 1
FIR No.:
US-US-3 Release Date: 2005-11-18
Version Number:
16. Other Information
Key/Legend: N.AP = Not applicable; N.AV = not available; ND = Not determined or No data; TLV = Threshold limit value;
TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit
The following sections contain revisions OR 2
NEW statements 3
16
Preparation Information: The chemical identification and properties for this material were provided
by the manufacturer. For Canadian locations, a manufacturer's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, National Parts General
Office,MD74,29500 Plymouth Road, Livonia, MI 48150,USA.
Disclaimer: The information on this data sheet represents our current data and is
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 8 / 9 Official Record
Application: MATS
O
Material Safety Data Sheet
167146 Level: 1
FIR No.:
US-US-3 Release Date: 2005-11-18
Version Number:
Attachment
Product Code Container Size Part of Kit Kit Product Code
PM-6 12 fl oz
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 9 / 9 Official Record
Application: MATS
|