O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
1. Product and Company Identification
Argent Spray Paint
Product Name:
See Attachment
Product Code:
Argent-Colored Automotive Exterior Spray Paint
Application:
Ford Motor Company
Supplier:
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Poison Control Center: 1-800-959-3673
Emergency Telephone:
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
This chemical product is a preparation.
Chemical Name CAS Number Percent Hazard
Concentration Classification
ACETONE 67-64-1 30-60 ACGIH/OSHA
CANPRECURS
OR
HAZCOM
RQ
PEL/TLV-US
LOCAL REV 1
WHMIS 1
TOLUENE 108-88-3 10-30 ACGIH/OSHA
RSMS_D_ALL
WHMIS 1
SARA 313
RQ
CAA-HAP
HAZCOM
LOCAL REV 1
PEL/TLV-US
CANPRECURS
OR
PROPANE 74-98-6 7-13 ACGIH/OSHA
PEL/TLV-US
HAZCOM
N-BUTANE 106-97-8 7-13 ACGIH/OSHA
PEL/TLV-US
HAZCOM
RSMS_D_ALL
WHMIS 1
METHYL ETHYL KETONE 78-93-3 5-10 ACGIH/OSHA
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
LOCAL REV 1
HAZCOM
CANPRECURS
OR
PEL/TLV-US
WHMIS 1
RQ
ETHYL ALCOHOL 64-17-5 1-5 ACGIH/OSHA
HAZCOM
PEL/TLV-US
RSMS_D_ALL
WHMIS 0.1
ALUMINUM 7429-90-5 0.5-1.5 HAZCOM
SARA 313
WHMIS 1
3. Hazards Identification
EXTREMELY FLAMMABLE
This product is irritating to the eyes and respiratory system.
Health:
No skin irritation can be expected from single short-term exposure to
this product. Prolonged or repeated contact may produce some
irritation.
This product may cause central nervous system (CNS) depression.
Extreme overexposure may result in unconsciousness and possibly
death.
Contents under pressure.
Physical and Chemical Hazards:
Container may explode if heated.
Extremely flammable aerosol.
Material contains a chemical which is a Hazardous Air Pollutant (HAP),
Environment:
regulated by the United States Clean Air Act.
4. First-Aid Measures
If gas/fume/vapor/dust/mist from the material is inhaled, remove the
Inhalation:
affected person immediately to fresh air.
If irritation persists, get medical attention.
For skin contact, wash immediately with soap and water.
Skin Contact:
If irritation persists, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water for
Eye Contact:
at least 15 minutes and seek medical attention.
If irritation persists, get medical attention.
If the material is swallowed, get immediate medical attention or advice
Ingestion:
-- Do not induce vomiting.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
If the affected person is not breathing, apply artificial respiration.
Notes to a Physician:
If the affected person's breathing is difficult, give oxygen.
5. Fire-Fighting Measures
Dry chemical, foam, carbon dioxide.
Extinguishing Media:
Use foam to blanket spilled material.
Water may be an ineffective extinguishing medium.
Specific Methods:
Water may be used to cool exposed containers to prevent pressure
build-up and explosion when exposed to extreme heat.
Extremely dangerous fire and explosion hazard. Vapors may be ignited
Specific Hazards:
by flame, sparks or contact with any hot surface (light bulb or steam
pipes) under normal atmospheric conditions. Forms explosive mixtures
with air.
Pressurized Container: May explode when exposed to heat or flame.
Upon decomposition, this product emits carbon monoxide, carbon
dioxide and/or low molecular weight hydrocarbons.
Vapors may form explosive mixture with air.
Fire fighters should be equipped with NIOSH-approved, self-contained
Protection of Firefighters:
breathing apparatus (SCBA) and full protective clothing.
6. Accidental Release Measures
Avoid inhalation of vapor, fumes, dust and/or mist from the spilled
Personal Precautions:
material.
Avoid skin contact with the spilled material.
Eliminate all sources of ignition or flammables that may come into
contact with a spill of this material.
Ventilate the contaminated area.
Wear appropriate protective equipment and clothing during clean-up.
Do not allow the spilled product to enter public drainage system or
Environmental Precautions:
open water courses.
Absorb the spilled material with an inert absorbent (nonflammable)
Methods for Cleaning Up:
material.
7. Handling and Storage
Handling:
Keep this product from heat, sparks, or open flame.
Technical Measures:
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
Precautions and Advice for Safe Avoid breathing vapor or mist.
Avoid skin and eye contact.
Handling:
Keep area ventilated. Do not smoke. Extinguish all flames, pilot lights,
and heaters. Turn off stoves, electric tools and appliances, and any
other sources of ignition.
Wear protective equipment during handling.
Use with adequate ventilation.
Do not puncture or incinerate container.
Eliminate all sources of ignition.
Storage: Technical Measures:
Avoid prolonged exposure of the container to direct sunlight.
Storage Conditions:
Do not expose to heat or store at temperatures above 120F.
Keep away from children.
8. Exposure Controls/Personal Protection
Use adequate mechanical ventilation.
Engineering Measures:
Exposure Limits:
TWA
Chemical Name STEL/C References Notes
1000(ppm)
ETHYL ALCOHOL ACGIH
1000(ppm) 1900(ppm) OSHA
500(ppm)
ACETONE 750(ppm) ACGIH
1000(ppm) 2400(ppm) OSHA
2500(ppm)
PROPANE ACGIH
200(ppm)
METHYL ETHYL ACGIH
KETONE
200(ppm) 590(ppm) OSHA
1000(ppm)
N-BUTANE ACGIH
20(ppm)
TOLUENE ACGIH
200(ppm) C300(ppm) OSHA
Note
ALUMINUM ACGIH metal dust, as Al:
10 mg/m3 TWA;
pyro powders, as
Al: 5 mg/m3
TWA; welding
fumes, as Al: 5
mg/m3; soluble
salts and Alkyl
(NOS), as Al: 2
mg/m3
Note OSHA Total dust 15
mg/m3;
Respirable
fraction 5 mg/m3
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
Personal Protective Equipment:
If engineering controls do not maintain airborne concentrations to a
Respiratory Protection:
level which is adequate to protect worker health, an approved
respirator must be worn. Respirator selection, use and maintenance
should be in accordance with the requirements of OSHA Respiratory
Protection Standard 29 CFR 1910.134 and/or Canadian Standard
CSA Z94.4.
None required for normal application of aerosol products where
Hand Protection:
minimal skin contact is expected. For long or repeated contact, wear
chemical resistant gloves such as nitrile gloves.
Wear safety glasses with side shields.
Eye Protection:
Wear chemical goggles; face shield (if splashing is possible).
Remove contaminated clothing and wash before reuse.
Skin and Body Protection:
Wash thoroughly after handling.
Hygiene Measures:
9. Physical and Chemical Properties
0.77
Specific Gravity:
AEROSOL
Physical State:
ORGANIC SOLVENT
Odor:
SILVER
Color:
N.AP
pH:
Temperature Range During which Changes
in Physical State Occur:
>-17.778 掳C
Boiling Point:
N.AV
Melting Point:
-28.88889 掳C PMCC
Flash Point:
Explosion Properties:
19 %
UEL:
1%
LEL:
>1 (AIR=1)
Vapor Density:
N.AP
Solubility:
22@40掳C mm2/S
Viscosity:
>1 Ether = 1
Evaporation Rate:
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
10. Stability and Reactivity
This is a stable material.
Stability:
Hazardous polymerization will not occur.
When in use, this product may form a flammable/explosive vapor-air
mixture.
Carbon monoxide, carbon dioxide.
Hazardous Decomposition Products:
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 6 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
11. Toxicological Information
64-17-5 ETHYL ALCOHOL
Inhalation, adult rat, LC50 = 20000 ppm (10 Hours)
106-97-8 N-BUTANE
Inhalation, adult rat, LC50 = 658 gm/m3 (4 Hours)
78-93-3 METHYL ETHYL KETONE
Inhalation, mouse, LC50 = 40 gm/m3 (2 Hours)
108-88-3 TOLUENE
Inhalation, mouse, LC50 = 5320 ppm (8 Hours)
85-68-7 BUTYL BENZYL PHTHALATE
Oral, adult rat, LD50 = 2330 mg/kg
78-93-3 METHYL ETHYL KETONE
Oral, adult rat, LD50 = 2737 mg/kg
108-88-3 TOLUENE
Oral, adult rat, LD50 = 5000 mg/kg
763-69-9 ETHYL 3-ETHOXYPROPANOATE
Oral, adult rat, LD50 = 5000 mg/kg
67-64-1 ACETONE
Oral, adult rat, LD50 = 5800 mg/kg
64-17-5 ETHYL ALCOHOL
Oral, adult rat, LD50 = 7060 mg/kg
763-69-9 ETHYL 3-ETHOXYPROPANOATE
Skin, adult rabbit, LD50 = 10 gm/kg
108-88-3 TOLUENE
Skin, adult rabbit, LD50 = 12124 mg/kg
78-93-3 METHYL ETHYL KETONE
Skin, adult rabbit, LD50 = 13 gm/kg
67-64-1 ACETONE
Skin, adult rabbit, LD50 = 20 gm/kg
Intentional misuse by deliberately concentrating and inhaling the
Inhalation:
contents may be harmful or fatal.
Prolonged and/or repeated skin contact with this product may cause
Skin Contact:
irritation/dermatitis.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 7 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
Allergic sensitivity from trace amounts of formaldehyde may occur due
Chronic (Long Term) Toxicity:
to exposure to this materials.
Based on animal studies, exposure to methyl ethyl ketone (MEK)
increases the onset of peripheral neuropathy caused by exposure to
methyl butyl ketone (MBK), and/or n-hexane, and/or ethyl butyl ketone.
MEK alone has not been shown to cause peripheral neuropathy.
Chronic overexposure to aluminum can result in lung damage and has
been associated with asthma-like syndrome. Accumulation of aluminum
in the body may result in neurological damage, anemia and bone
softening. Repeated overexposure to high levels of aluminum oxide may
lead to pulmonary fibrosis, a progressive lung disorder.
Prolonged and repeated exposure of pregnant animals to toluene
(concentrations greater than 1500 ppm) has been reported to cause
adverse fetal developmental effects. It has also been reported that
variable growth deficiencies have occurred in human infants born to
mothers who intentionally inhaled toluene containing products (e.g.,
glue).
Reports have associated repeated and prolonged overexposure to
solvents with permanent brain and nervous system damage.
This material contains an ingredient which is a possible cancer hazard
based on tests with laboratory animals. Overexposure may create a
cancer risk.
This material contains an ingredient which is a possible reproductive
hazard based on tests with laboratory animals.
This product contains BUTYL BENZYL PHTHALATE; prolonged or
repeated exposure to this product may damage the peripheral nerves
and affect blood cells and liver function.
12. Ecological Information
No specific aquatic data available for this product.
13. Disposal Considerations
Do not puncture or incinerate containers. Large number of aerosol
Waste from Residues:
containers may require handling as a hazardous waste. Consult local,
state, federal, or provincial agency for proper disposal method in your
area.
Do not crush, puncture or incinerate spent containers. Large numbers or
Contaminated Packaging:
aerosol containers may require handling as a hazardous waste. Consult
local, provincial, and federal agencies for the proper disposal method in
your area.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 8 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
Aerosols
Proper Shipping Name:
UN1950
UN Number:
2.1
Hazard Class / Division:
Reportable Quantity (per
packaging):
CAS Name
RQ
50-00-0 >100000 FORMALDEHYDE
67-64-1 13158 ACETONE
71-43-2 >100000 BENZENE
78-93-3 62500 METHYL ETHYL KETONE
85-68-7 5000 BUTYL BENZYL PHTHALATE
108-88-3 9091 TOLUENE
Label: FLAMMABLE GAS
Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II
AEROSOLS
Proper Shipping Name:
UN1950
UN Number:
2.1
Hazard Class / Division:
Packing Group:
Label: FLAMMABLE GAS
Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico)
AEROSOLES
Proper Shipping Name:
UN1950
UN Number:
2.1
Hazard Class/Division:
Label: FLAMMABLE GAS
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 9 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
International and Domestic Air Transportation - ICAO & IATA Section 4.2
AEROSOLS, FLAMMABLE
Proper Shipping Name:
UN1950
UN Number:
2.1
Hazard Class/Division:
FLAMMABLE GAS
Label:
International Water Transportation - IMDG Code Amendment 31-02
AEROSOLS
Proper Shipping Name:
UN1950
UN Number:
2.1
Hazard Class/Division:
2-13
Ems Number:
Label: FLAMMABLE GAS
15. Regulatory Information
California Proposition 65: WARNING: This product contains a chemical known to the State of California to cause birth
defects or other reproductive harm.
California Proposition 65: WARNING: This product contains a chemical known to the State of California to cause
cancer.
This product contains an ingredients(s) considered to be a hazardous substance(s) by the State of New Jersey.
This product contains a toxic chemical or chemicals subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material
should be minimized to the greatest extent possible.
16. Other Information
Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit
value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit
HMIS and NFPA Hazard Class Information:
Health: 2 (Moderate) Flammability: 3 (Serious) Physical Hazard: 1 (Slight)
HMIS Hazard Class:
Health: 2 (Moderate) Flammability: 3 (Serious) Instability: 1 (Slight)
NFPA Hazard Class:
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 10 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
The following sections contain revisions OR 2
15
NEW statements.
16
8
The chemical identification and properties for this material were provided
Preparation Information:
by the manufacturer. For Canadian locations, a manufacture's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, Diagnostic Service Center II, 1800
Fairlane Drive, Allen Park, MI 48101, USA.
The information on this data sheet represents our current data and is
Disclaimer:
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 11 / 12 Official Record
Application: MATS
O
Material Safety Data Sheet
014479 Level: 1
FIR No.:
US-US-6 Release Date: 2008-07-16
Version Number:
Attachment
Product Code Container Size Part of Kit Kit Product Code
PM-19K207-AA 13 oz (369 g)
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 12 / 12 Official Record
Application: MATS
|