MSDS PAGE: CAS 2004-12-0 MSDS fcsdchemicalsandlubricants

O

Material Safety Data Sheet
Product Name: Rearview Mirror Button Adhesive
137446 1
FIR No. Level:
US-US-3 2004-12-08
Version Number: Release Date:
1. Product and Company Identification
Product Name: Rearview Mirror Button Adhesive
Product Code: See Attachment
Application: Rearview Mirror Button Adhesive
Supplier: Ford Motor Company
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Emergency Telephone: Poison Control Center: 1-800-959-3673
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
Contains no other ingredients now known to be hazardous as defined by the applicable regulations.

Chemical Name Percent
Concentration

3. Hazards Identification
Health: May cause skin, eye and respiratory tract irritation.
This product is not expected to cause eye irritation under normal
conditions of use. Symptoms of slight eye irritation may result when
direct contact occurs.
This product may cause an allergic skin reaction.

4. First-Aid Measures
Inhalation: If gas/fume/vapor/dust/mist from the material is inhaled, remove the
affected person immediately to fresh air.
If irritation persists, get medical attention.

Skin Contact: For skin contact, wash immediately with soap and water.
If irritation persists, get medical attention.

Eye Contact: In case of contact with eyes, rinse immediately with plenty of water for
at least 15 minutes and seek medical attention.

Notes to a Physician: If the affected person is not breathing, apply artificial respiration.

5. Fire-Fighting Measures
Extinguishing Media: Dry chemical, foam, carbon dioxide, water fog.

Specific Methods: Use water to cool fire-exposed containers, structures, and to protect
personnel.

PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 5 Official Record
Application: MATS
O

Material Safety Data Sheet
Product Name: Rearview Mirror Button Adhesive
137446 1
FIR No. Level:
US-US-3 2004-12-08
Version Number: Release Date:
Protection of Firefighters: Fire fighters should be equipped with NIOSH-approved, self-contained
breathing apparatus (SCBA) and full protective clothing.

6. Accidental Release Measures
Personal Precautions: Not applicable

Environmental Precautions: Not applicable

Methods for Cleaning Up: No special precautions necessary.
Sweep up spilled material.

7. Handling and Storage
Handling:

Technical Measures: Keep this product from heat, sparks, or open flame.

Precautions and Advice for Use this product with adequate ventilation.
Safe Handling:
Storage:

Technical Measures: No special precautions.

Storage Conditions: Keep this material in a cool, well-ventilated place.

8. Exposure Controls/Personal Protection
Engineering Measures: Use general ventilation.

Personal Protective Equipment:

None required under normal conditions.
Respiratory Protection:

Use impervious gloves.
Hand Protection:

Wear safety glasses.
Eye Protection:

Light protective clothing is recommended.
Skin and Body Protection:

Hygiene Measures: Wash thoroughly after handling.

PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 5 Official Record
Application: MATS
O

Material Safety Data Sheet
Product Name: Rearview Mirror Button Adhesive
137446 1
FIR No. Level:
US-US-3 2004-12-08
Version Number: Release Date:
9. Physical and Chemical Properties
ND
Specific Gravity:
SOLID
Physical State:
ARTICLE
Form:
N.AV
Odor:
GRAY
Color:
N.AP
pH:

Temperature Range During which
Changes in Physical State Occur:
N.AP
Boiling Point:
N.AP
Flash Point:
N.AP
Auto-ignition Temperature:

Explosion Properties:

N.AP
UEL:
N.AP
LEL:
NA
Solubility:
N.AP
Evaporation Rate:

10. Stability and Reactivity
This is a stable material.
Stability:
Hazardous polymerization will not occur.

This product may react with strong acids.
Conditions and Materials to Avoid:

None
Hazardous Decomposition Products:

11. Toxicological Information
Prolonged and/or repeated skin contact with this product may cause
Skin Contact:
irritation/dermatitis.

12. Ecological Information
No specific aquatic data available for this product.

13. Disposal Considerations
Dispose of the material in an approved industrial waste landfill
Waste from Residues:
according to federal, state, and local regulations.

No available information.
Contaminated Packaging:

PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 5 Official Record
Application: MATS
O

Material Safety Data Sheet
Product Name: Rearview Mirror Button Adhesive
137446 1
FIR No. Level:
US-US-3 2004-12-08
Version Number: Release Date:

14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
This product is not regulated as a dangerous good.
Canadian Transportation of Dangerous Goods (T.D.G.) -TDGR Schedule II
This product is not regulated as a dangerous good.
Secretary of Communication and Transportation (SCT)- NOM-002-SCT2/1994 (Mexico)
This product is not regulated as a dangerous good.
International and Domestic Air Transportation - ICAO & IATA Section 4.2
This product is not regulated as a dangerous good.
International Water Transportation - IMDG Code Amendment 31-02
This product is not regulated as a dangerous good.
15. Regulatory Information
This product contains NONE of the substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372

16. Other Information
Key/Legend: N.AP = Not applicable; N.AV = not available; ND = Not determined or No data; TLV = Threshold limit value;
TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit

The following sections contain revisions 2
OR NEW statements
Preparation Information: The chemical identification and properties for this material were provided
by the manufacturer. For Canadian locations, a manufacturer's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, Central Laboratory Building - Room
S-120, 15000 Century Drive, Dearborn, MI 48120

Disclaimer: The information on this data sheet represents our current data and is
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.

PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 5 Official Record
Application: MATS
O

Material Safety Data Sheet
Product Name: Rearview Mirror Button Adhesive
137446 1
FIR No. Level:
US-US-3 2004-12-08
Version Number: Release Date:

Attachment
Product Code Container Size Part of Kit Kit Product Code
F7AZ-17698-AA 16X33 mm
F7AZ-17698-BA 21X29mm

PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 5 Official Record
Application: MATS

ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP

NAME	CAS
enerfab_com---kobelco_electrodes_for_flux_cored_arc_welding.asp	N/A
enerfab_com---liquid_wrench_super_penetrant.asp	N/A
enerfab_com---lubriplate_jack_oil_vulcan.asp	N/A
enerfab_com---magnaflux_spotcheck_developer.asp	67-63-0 67-64-1 75-28-5 14807-96-6
enerfab_com---munkadur_classic_base_850.asp	25068-38-6 074-00-8
enerfab_com---munkadur_classic_hardener_1060.asp	26761-45-5 100-51-6 25068-38-6 69-72-7
enerfab_com---neu-tri_solvent.asp	N/A
enerfab_com---nickel_copper_moly_chromium_alloy_welding_rods_and_wires.asp	N/A
enerfab_com---nickel_alloy.asp	N/A
enerfab_com---nickel_bare_wire.asp	N/A
enerfab_com---nickel_based_alloy_steel_series_200_400_600_800.asp	N/A
enerfab_com---nickel_grade_anti_seize_lubricant.asp	7440-02-0 7782-42-5 7429-90-5
enerfab_com---oxygen.asp	N/A
enerfab_com---oxygen_in_argon.asp	N/A
enerfab_com---paintstik_markers.asp	8001-26-1 1333-86-4 7429-90-5 7440-50-8 7440-66-6
enerfab_com---pl261msds9-28-04.asp	N/A
enerfab_com---plasite_4300_4310_part_a.asp	N/A
enerfab_com---plasite_7156_light_gray.asp	N/A
enerfab_com---propylene.asp	115-07-1
enerfab_com---propylene_glycol_usp.asp	57-55-6
enerfab_com---protect-o-metal_anti-spatter.asp	1317-65-3
enerfab_com---sbr_blending_polymer.asp	N/A
enerfab_com---sherwin_dr-62_cleaner.asp	N/A
enerfab_com---stainless_steel_bare_wire.asp	N/A
enerfab_com---stainless_steel_mig_wires.asp	N/A
enerfab_com---stainless_steel_series_300_400.asp	N/A
enerfab_com---s_o_s_remover.asp	1330-20-7 78-93-3 74-98-6 106-97-8 67-56-1 100-41-4
enerfab_com---titanium.asp	N/A
enerfab_com---toluene.asp	N/A
enerfab_com---tungsten_electrodes.asp	N/A
enerfab_com---unleaded_gasoline.asp	N/A
enerfab_com---urethane_converter_133.asp	N/A
enerfab_com---welding_consumables.asp	N/A
esabna_com---7958.asp	7429-90-5 7440-41-7 7440-47-3 7440-50-8 7439-89-6 7439-95-4 7439-96-5 7440-21-3 7440-32-6 7440-66-6
esabna_com---7990.asp	7440-47-3 7439-89-6 7439-96-5 7439-98-7 7440-02-0 7440-21-3
fcsdchemicalsandlubricants_com---getmsds.asp	N/A
fcsdchemicalsandlubricants_com---getmsdsce.asp	N/A
fcsdchemicalsandlubricants_com---getmsdscf.asp	N/A
fcsdchemicalsandlubricants_com---kt172691kt.asp	1317-65-3
fcsdchemicalsandlubricants_com---us008175us.asp	2006-04-0 80-15-9
fcsdchemicalsandlubricants_com---us014479us.asp	2008-07-1 67-64-1 108-88-3 74-98-6 106-97-8
fcsdchemicalsandlubricants_com---us137446us.asp	2004-12-0
fcsdchemicalsandlubricants_com---us139377us.asp	64742-62-7 64742-52-5 68649-42-3
fcsdchemicalsandlubricants_com---us158358us.asp	N/A
fcsdchemicalsandlubricants_com---us166625us.asp	2005-10-0 64-02-8
fcsdchemicalsandlubricants_com---us167146us.asp	2005-11-1 8008-20-6 222222-22-2 91-20-3
fcsdchemicalsandlubricants_com---us168654us.asp	2007-05-0 67-64-1 1330-20-7 142-82-5 100-41-4 124-38-9
fcsdchemicalsandlubricants_com---us171146us.asp	2007-03-1 110-91-8 67-63-0 111-76-2 112-80-1
fcsdchemicalsandlubricants_com---us173219us.asp	2007-01-2 8042-47-5 7440-66-6
fcsdchemicalsandlubricants_com---us174980us.asp	2008-07-1 64741-88-4