O
Material Safety Data Sheet
008175 Level: 1
FIR No.:
US-US-1 Release Date: 2006-04-06
Version Number:
1. Product and Company Identification
Product Name: Stud and Bearing Mount
Product Code: See Attachment
Application: High strength (green), low viscosity retaining compound
Supplier: Ford Motor Company
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Emergency Telephone: Poison Control Center: 1-800-959-3673
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
This chemical product is a preparation.
Chemical Name CAS Number Percent Hazard
Concentration Classification
80-15-9
CUMENE HYDROPEROXIDE 1-5 RQ
RSMS_D_ALL
SARA 313
WHMIS 1
3. Hazards Identification
CAUTION
Health: This product may cause irritation to the eyes and respiratory system.
This product may cause an allergic skin reaction.
If ingested, this product may cause gastrointestinal irritation.
Physical and Chemical Hazards: This product is not combustible.
4. First-Aid Measures
Inhalation: If gas/fume/vapor/dust/mist from the material is inhaled, remove the
affected person immediately to fresh air.
If irritation persists, get medical attention.
Skin Contact: Wash skin with soap and water.
If irritation persists, get medical attention.
Eye Contact: In case of contact with eyes, rinse immediately with plenty of water for
at least 15 minutes and seek medical attention.
If irritation persists, get medical attention.
Ingestion: If the material is swallowed, get immediate medical attention or advice
-- Do not induce vomiting.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
008175 Level: 1
FIR No.:
US-US-1 Release Date: 2006-04-06
Version Number:
Most Important Symptoms Effects: Produces irritation to the eyes, characterized by a burning sensation,
redness, tearing, inflammation, and possible corneal injury.
5. Fire-Fighting Measures
Extinguishing Media: Dry chemical, foam, carbon dioxide, water fog.
Specific Methods: Use water to cool fire-exposed containers, structures, and to protect
personnel.
Specific Hazards: Upon decomposition, this product emits carbon monoxide, carbon
dioxide and/or low molecular weight hydrocarbons.
Irritating and/or toxic fumes and gases may be emitted upon the
product's decomposition.
Protection of Firefighters: Fire fighters should be equipped with NIOSH-approved, self-contained
breathing apparatus (SCBA) and full protective clothing.
6. Accidental Release Measures
Personal Precautions: Avoid inhalation of vapors and contact with skin and eyes.
Ventilate the contaminated area.
Wear appropriate protective equipment and clothing during clean-up.
Environmental Precautions: Do not allow the spilled product to enter public drainage system or
open water courses.
Methods for Cleaning Up: Absorb the spilled material with an inert absorbent (nonflammable)
material.
7. Handling and Storage
Handling:
Technical Measures: No special precautions necessary.
Precautions and Advice for Safe Do not get this material in your eyes, on your skin, or on your clothing.
Handling: Do not breathe gas/fumes/vapor/spray.
Use with adequate ventilation.
Wear protective equipment during handling.
Storage:
Technical Measures: No special precautions.
Storage Conditions: Storage temperatures should not exceed 40 C.
Store this product in a cool, dry, well-ventilated place.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
008175 Level: 1
FIR No.:
US-US-1 Release Date: 2006-04-06
Version Number:
8. Exposure Controls/Personal Protection
Engineering Measures: Use adequate ventilation to control airborne concentrations below the
exposure limits/guidelines. If user operations generate a vapor, dust,
and/or mist, use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below the
recommended exposure limits/guidelines.
Control Parameters: No Occupational Exposure Limits are given for this material.
Personal Protective Equipment:
If engineering controls do not maintain airborne concentrations to a
Respiratory Protection:
level which is adequate to protect worker health, an approved
respirator must be worn. Respirator selection, use and maintenance
should be in accordance with the requirements of OSHA Respiratory
Protection Standard 29 CFR 1910.134 and/or Canadian Standard
CSA Z94.4.
The use of neoprene gloves is recommended.
Hand Protection:
The use of nitrile-latex gloves is recommended.
Wear safety glasses with side shields.
Eye Protection:
Light protective clothing is recommended.
Skin and Body Protection:
Wash thoroughly after handling.
Hygiene Measures: Remove contaminated clothing and wash the skin thoroughly with soap and
water after work.
Wash contaminated clothing before reuse.
When using this material, do not eat, drink or smoke.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
008175 Level: 1
FIR No.:
US-US-1 Release Date: 2006-04-06
Version Number:
9. Physical and Chemical Properties
1.1
Specific Gravity:
LIQUID
Physical State:
LIQUID
Form:
IRRITATING
Odor:
GREEN
Color:
N.AP
pH:
Temperature Range During which Changes
in Physical State Occur:
>+148.889 掳C (>300 F)
Boiling Point:
N.AV
Freezing Point:
>95 掳C ASTM D93
Flash Point:
N.AV
Auto-ignition Temperature:
Explosion Properties:
ND
UEL:
ND
LEL:
<5@25掳C mmHg
Vapor Pressure:
>1 (AIR=1)
Vapor Density:
INSOLUBLE IN WATER
Solubility:
N.AP
Viscosity:
ND
Evaporation Rate:
10. Stability and Reactivity
This is a stable material.
Stability:
Hazardous polymerization will not occur.
This product can react with oxidizing materials.
Conditions and Materials to Avoid:
Carbon monoxide, carbon dioxide, and other low molecular weight
Hazardous Decomposition Products:
hydrocarbons.
Irritating and toxic gases or fumes may be released during a fire.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
008175 Level: 1
FIR No.:
US-US-1 Release Date: 2006-04-06
Version Number:
11. Toxicological Information
80-15-9 CUMENE HYDROPEROXIDE
Inhalation, adult rat, LC50 = 220 ppm (4 Hours)
80-15-9 CUMENE HYDROPEROXIDE
Oral, adult rat, LD50 = 382 mg/kg
81-07-2 SACCHARIN
Oral, mouse, LD50 = 17 gm/kg
80-15-9 CUMENE HYDROPEROXIDE
Skin, adult rat, LD50 = 500 mg/kg
12. Ecological Information
No specific aquatic data available for this product.
13. Disposal Considerations
Dispose of waste material according to Local, State, Federal, and
Waste from Residues:
Provincial Environmental Regulation.
No consideration given when disposed of according to local, state, and
Contaminated Packaging:
Federal regulations.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
008175 Level: 1
FIR No.:
US-US-1 Release Date: 2006-04-06
Version Number:
14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
This product is not regulated as a dangerous good.
Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II
This product is not regulated as a dangerous good.
Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico)
This product is not regulated as a dangerous good.
International and Domestic Air Transportation - ICAO & IATA Section 4.2
This product is not regulated as a dangerous good.
International Water Transportation - IMDG Code Amendment 31-02
This product is not regulated as a dangerous good.
15. Regulatory Information
The components of this product are listed on the TSCA Inventory
This product contains a toxic chemical or chemicals subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material
should be minimized to the greatest extent possible.
16. Other Information
Use only as directed.
Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit
value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit
Preparation Information: The chemical identification and properties for this material were provided
by the manufacturer. For Canadian locations, a manufacturer's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, National Parts General
Office,MD74,29500 Plymouth Road, Livonia, MI 48150,USA.
Disclaimer: The information on this data sheet represents our current data and is
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 6 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
008175 Level: 1
FIR No.:
US-US-1 Release Date: 2006-04-06
Version Number:
Attachment
Product Code Container Size Part of Kit Kit Product Code
TA-27 0.2 fl. oz. (6 mL)
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 7 / 7 Official Record
Application: MATS
|