Munkadur庐 Classic (Base 鈥? 850) Safety Data Sheet acc. to 2001/58/EC
1. Identification of the Substance/Preparation and of the Company
Identification of the substance or preparation:
-
Munkadur庐 850
- Commercial product name:
- Manufacturer/Distributor: Munk + Schmitz Oberfl盲chentechnik GmbH & Co. KG
Telephone no. Poller Kirchweg 92-104, 51105 K枚ln / Germany Tel.: ..49 (0)221/83908-0
- Further information from: Dept: BT 鈥? Quality Control / Laboratory
2 Composition / Information on Ingredients
- Chemical Characterization: Preparation contains: epoxy resin, pigments, thixotropic agents
- Hazardous ingredients: CAS-Nr.: 25068-38-6 epoxy resins MG: < 700 60 鈥? 70 % by weight
- INDEX-No.: 603-074-00-8
3 Hazards Identification
- Critical hazards to man and environment: Xi irritating
- Safety risks: R 36/38 Irritating to eyes and skin.
R 43 May cause sensitization by skin contact.
4 First Aid Measures
- Inhalation: Move the patient at once to fresh air and seek medical advice.
In case of unconsciousness turn patient鈥檚 body and head to stable side position.
- Skin contamination: Wash affected area with soap and water and flush with plenty of water.
- Eye contamination: Hold eyelids apart and immediately flush eyes with plenty of water.
Seek medical advice.
- Ingestion: If swallowed, call a physician immediately. Flush mouth with water and let patient
drink plenty of water. Do not induce vomiting.
5 Fire-Fighting Measures
- Suitable extinguishing
media: CO2, extinguishing powder or water spray. In case of large fire use water spray
or alcohol foam.
- Unsuitable extinguishing
media: Full water jet
Special hazards: When heated or in case of fire formation of toxic gases possible
- Special fire fighting
procedures: No special measures required.
Munk + Schmitz Telefon (0221) 8 39 08-0 Revised: 22.03.04
Certified to Oberfl盲chentechnik GmbH & Co. KG Fax (0221) 8 39 08-27
DIN EN ISO 9001 Poller Kirchweg 92-104, 51105 K枚ln E-mail info@munk-schmitz.de Page 1 of 4
Munkadur庐 Classic (Base 鈥? 850) Safety Data Sheet acc. to 2001/58/EC
6 Accidental Release Measures
- Personal precautions: Wear protective clothing.
- Protective clothing: Gloves made from PVC, neoprene or nitrile rubber
- Environmental precautions: Avoid penetration into sewerage, pits and cellars
- Methods for cleaning-up: Admix with liquid absorbent (sand, sileceous earth, acid neutralizer,
universal neutralizer, saw dust) and dispose of in accordance with
regulations.
Dispose of contaminated material as waste in acc. w. pt. 13.
Ensure adequate ventilation.
7 Handling and Storage
- Handling:
- Precautions for safe handling: Ensure good ventilation/exhausting at place of work
Handle and open container prudently.
- Precautions against fire and explosion: Provide for breathing units
Storage:
-
- Conditions of storage rooms and vessels: Do not store outdoors.
- Advice of storage of imcompatible materials: Not required.
- Further information for storage: Keep in tightly closed containers.
- VbF class: Not applicable.
8 Exposure Controls / Personal Protection
- Threshold limit values: CAS-No., identification of substance, %, type, value, unit: not applicable.
- Other information: This information is based on the Safety Data Sheets of the individual components.
Personal protection equipment:
-
- Respiratory protection: Not required
- Hand protection: Protective gloves made from PVC or neoprene rubber
- Eye protection: Tightly fitting safety glasses
- Protective clothing: Appropriate protective clothing
- General Protection and
Hygiene Measures: Keep away from food, beverages and feed.
Promptly remove clothing that becomes contaminated.
Wash hands each time before a break and at the end of a working day.
Avoid eye and skin contact.
9 Physical and Chemical Properties
Munk + Schmitz Telefon (0221) 8 39 08-0 Revised: 22.03.04
Certified to Oberfl盲chentechnik GmbH & Co. KG Fax (0221) 8 39 08-27
DIN EN ISO 9001 Poller Kirchweg 92-104, 51105 K枚ln E-mail info@munk-schmitz.de Page 2 of 4
Munkadur庐 Classic (Base 鈥? 850) Safety Data Sheet acc. to 2001/58/EC
- Physical form: Honeylike, high viscous liquid
- Color: Yellow
- Odor: Very light odor
- Change in physical state: Value/Range Unit Method
- Melting point/melting rate: approx. 15 掳
C
- Boiling point/boiling range: > 260 掳
C
- Flash point: > 150 掳
C
- Ignition temperature: > 450 掳
C
- Explosive properties: The product is not explosive.
- Vapor pressure: at 160 掳C 0,02 mbar
- Density: approx. 1,4 g/ml
- Solubility in water/Mixability with water: at 23 掳C 0,009 g/L
- Viscosity (dynamic): at 25 掳
C > 9000 鈥? 14000 mPas
Stability and Reactivity
10
- Thermal decomposition/conditions to avoid: Begins at 200 鈥? 250 掳C
- Hazardous polymerisation: Polymerises exothermally with amines, merkaptans and
Lewis acids at room temperature and above.
- Hazardous decomposition products: Hazardous decomposition products unknown.
11 Toxicological Information
- Acute toxicity:
- Acute oral / dermal / inhalation toxicity (LD/LC 50)
Component Type Value Species
- Epoxy resin oral 11400 mg/kg rat
dermal > 2000 mg/kg rabbit
inhalative no data mg/L/4h rat
- Primary irritation: skin: irritates skin and mucous membranes
eye: irritating
sensitization: may cause sensitization by skin contact
12 Ecological Information
- Mobility and bioaccumulation potential: Hardly biodegradable.
- Ecotoxicity: Aquatic toxicity: Rainbow trout LC 50 (96h): 3,6 mg/L
Water flea EC 50 (48h): 2,8 mg/L
Green algae EC 50 (96h): 220,0 mg/L
- Other ecological
information: German water pollution category: 2 water polluting
Do not let penetrate into ground water, waters or sewerage.
Pollutes potable water already when small quantities penetrate into subsoil.
________________________________________________________________________________________________
___________
13 Disposal Considerations
Munk + Schmitz Telefon (0221) 8 39 08-0 Revised: 22.03.04
Certified to Oberfl盲chentechnik GmbH & Co. KG Fax (0221) 8 39 08-27
DIN EN ISO 9001 Poller Kirchweg 92-104, 51105 K枚ln E-mail info@munk-schmitz.de Page 3 of 4
Munkadur庐 Classic (Base 鈥? 850) Safety Data Sheet acc. to 2001/58/EC
- Disposal of remainders: Recommendation: Must not be disposed of with domestic waste.
Do not let penetrate into sewerage.
- Hazardous waste number: 070204 鈥濺esin remainder, non-cured鈥?
- Further disposal information: Incineration of hazardous material
- Disposal of containers: In accordance with federal, state and local regulations.
14 Transport Information
- Transport/Other Information: Non-hazardous material in terms of the transport
regulations.
15 Regulatory Information
- Identification to EC Directives: The product has been classified and identified according
to EC directives / hazardous material directives.
- Danger symbol and danger text: Xi irritating
- Danger defining components for labelling: Epoxy resin molecular weight: < 700
- Risk-phrases: R 36/38 Irritating to eyes and skin.
R 43 May cause sensitization by skin contact.
- Safety-phrases: S 37/39 Wear suitable gloves and eye/face protection.
S 28 After contact with skin, wash immediately with plenty
of soap and water.
S 53 Avoid exposure 鈥? obtain special instructions before use.
- Special identification of specific preparations: Contains epoxy-containing compounds.
National Regulations:
-
- Classification to VbF: Not applicable.
- German water pollution category: WGK 2: water polluting.
16 Other Information
This information is based on current knowledge and experience. It does not represent a guarantee for properties
of the described product and does not establish a contractual relationship.
- Data Sheet prepared by: Dept. BT, Laboratory
- Translated into English (German original)
Munk + Schmitz Telefon (0221) 8 39 08-0 Revised: 22.03.04
Certified to Oberfl盲chentechnik GmbH & Co. KG Fax (0221) 8 39 08-27
DIN EN ISO 9001 Poller Kirchweg 92-104, 51105 K枚ln E-mail info@munk-schmitz.de Page 4 of 4
|