O
Material Safety Data Sheet
173219 Level: 3
FIR No.:
US-US-6 Release Date: 2007-01-25
Version Number:
1. Product and Company Identification
Product Name: SAE (5W-20 and 5W-30 Premium Synthetic Blend, 10W-30 Super
Premium, and 10W-40 Premium) Motor Oil
Product Code: See Attachment
Application: Motor Oil
Supplier: Ford Motor Company
Attention: MSDS Information, P.O. Box 1899
Dearborn, Michigan 48121
1-800-392-3673
Emergency Telephone: Poison Control Center: 1-800-959-3673
CHEMTREC: U.S. and Canada: 1-800-424-9300
CHEMTREC: International: 1-703-527-3887
2. Composition/Information on Ingredients
This chemical product is a preparation.
This Chemical Product Contains No Other Ingredients Now Known To Be Hazardous as Defined by the Applicable
Regulations.
8042-47-5D
HIGHLY REFINED MINERAL OIL 60-100
7440-66-6Z
ZINC COMPOUND 0.5-1.5
3. Hazards Identification
Health: Exposure to oil mist/fume/vapor may cause respiratory tract irritation.
Inhalation of mist and vapors may irritate the nose, throat, and lungs.
This product is not expected to cause eye irritation under normal
conditions of use. Symptoms of slight eye irritation may result when
direct contact occurs.
Ingestion of this product may cause nausea, vomiting and diarrhea.
No skin irritation can be expected from single short-term exposure to
this product. Prolonged or repeated contact may produce some
irritation.
4. First-Aid Measures
Inhalation: If gas/fume/vapor/dust/mist from the material is inhaled, remove the
affected person immediately to fresh air.
If irritation persists, get medical attention.
Skin Contact: Wash skin with soap and water.
If irritation persists, get medical attention.
Eye Contact: In case of contact with eyes, rinse immediately with plenty of water for
at least 15 minutes and seek medical attention.
Ingestion: If the material is swallowed, get immediate medical attention or advice
-- Do not induce vomiting.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 1 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
173219 Level: 3
FIR No.:
US-US-6 Release Date: 2007-01-25
Version Number:
Notes to a Physician: If the affected person is not breathing, apply artificial respiration.
This material, if aspirated into the lungs, may cause chemical
pneumonitis; treat the affected person appropriately.
5. Fire-Fighting Measures
Extinguishing Media: Dry chemical, foam, carbon dioxide, water fog.
Specific Methods: Water may be used to cool exposed containers to prevent pressure
build-up and explosion when exposed to extreme heat.
Specific Hazards: Combustion may produce the following products: Oxides of carbon,
nitrogen, and phosphorus.
Decomposition of this product may yield hydrogen sulfide and sulfur
dioxide.
Empty container(s) may retain product residue -- solid, liquid, and/or
vapor -- and can be dangerous. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose such containers to heat, flame, sparks,
static electricity, or other sources of ignition. They may explode and
cause injury or death.
Water or foam may cause frothing if the product is heated above 93
degrees C (200 degrees F).
Protection of Firefighters: Fire fighters should be equipped with NIOSH-approved, self-contained
breathing apparatus (SCBA) and full protective clothing.
6. Accidental Release Measures
Personal Precautions: Eliminate all sources of ignition or flammables that may come into
contact with a spill of this material.
Surfaces may become slippery after spillage.
Wear appropriate protective equipment and clothing during clean-up.
Environmental Precautions: Do not allow the spilled product to enter public drainage system or
open water courses.
WATER SPILL: Remove from surface by skimming or with suitable
absorbents. If allowed by local authorities and environmental agencies,
sinking and/or suitable dispersants may be used in confined waters.
Methods for Cleaning Up: Dike the spilled material, where this is possible.
Absorb the spilled material with an inert absorbent (nonflammable)
material.
In case of large spills, follow all facility Emergency Response
Procedures.
7. Handling and Storage
Handling:
Technical Measures: Avoid the generation of oil mists.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 2 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
173219 Level: 3
FIR No.:
US-US-6 Release Date: 2007-01-25
Version Number:
Precautions and Advice for Safe Elevated temperature or mechanical action may form vapors, mist, or
Handling: fumes which may be irritating to the eyes, nose, throat, and lungs.
Avoid breathing vapors or mist.
Keep the container closed when not in use.
Storage: Technical Measures: Do not reuse the empty container.
Storage Conditions: Keep the container tightly closed and in a cool, well-ventilated place.
Store this product away from strong oxidizing agents.
8. Exposure Controls/Personal Protection
Engineering Measures: Use adequate ventilation to control airborne concentrations below the
exposure limits/guidelines. If user operations generate a vapor, dust,
and/or mist, use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below the
recommended exposure limits/guidelines.
Local exhaust is suggested for use, where possible, in enclosed or
confined spaces.
Eyewash and emergency showers are recommended.
Control Parameters: If oil mist is generated, observe the OSHA exposure limit of 5 mg/m3
(TWA) and the ACGIH exposure limit of 5 mg/m3 (TWA) and the
ACGIH short term exposure limit (STEL) of 10 mg/m3. Ford Motor
Company recommends an exposure limit of 1.0 mg/m3.
Personal Protective Equipment:
If engineering controls do not maintain airborne concentrations to a
Respiratory Protection:
level which is adequate to protect worker health, an approved
respirator must be worn. Respirator selection, use and maintenance
should be in accordance with the requirements of OSHA Respiratory
Protection Standard 29 CFR 1910.134 and/or Canadian Standard
CSA Z94.4.
The use of nitrile-latex gloves is recommended.
Hand Protection:
Wear safety glasses with side shields.
Eye Protection:
Hygiene Measures: Remove contaminated clothing and wash the skin thoroughly with soap and
water after work.
Wash contaminated clothing before reuse.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 3 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
173219 Level: 3
FIR No.:
US-US-6 Release Date: 2007-01-25
Version Number:
9. Physical and Chemical Properties
0.85-0.88
Specific Gravity:
LIQUID
Physical State:
PETROLEUM
Odor:
AMBER
Color:
N.AP
pH:
Temperature Range During which Changes
in Physical State Occur:
191 掳C ASTM D93
Flash Point:
N.AV
Auto-ignition Temperature:
Explosion Properties:
N.AV
UEL:
N.AV
LEL:
<1@20掳C mmHg
Vapor Pressure:
>1 (AIR=1)
Vapor Density:
NEGLIGIBLE IN WATER
Solubility:
45-117 cSt ASTM D445
Viscosity:
<1 (BuAc = 1)
Evaporation Rate:
10. Stability and Reactivity
This is a stable material.
Stability:
Hazardous polymerization will not occur.
This product may react with strong oxidizing agents (bleach--sodium
Conditions and Materials to Avoid:
hypochlorite, calcium hypochlorite, hydrogen peroxide, permanganate,
nitric acid, concentrated OXYGEN, perchlorates).
This product may react with strong reducing agents.
Decomposition of this product may emit oxides of nitrogen and carbon
Hazardous Decomposition Products:
monoxide.
Decomposition of this product may yield oxides of phosphorus.
Decomposition of this product may emit oxides of sulfur.
Decomposition of this product may yield metallic oxides.
Decomposition of this product may emit hydrogen sulfide.
Irritating and/or toxic gases may be emitted upon the product's
decomposition.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 4 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
173219 Level: 3
FIR No.:
US-US-6 Release Date: 2007-01-25
Version Number:
11. Toxicological Information
Prolonged or repeated contact with this product may dry and/or defat the
Skin Contact:
skin.
Prolonged and/or repeated skin contact with this product may cause
irritation/dermatitis.
Base oil severely refined: Not carcinogenic in animal studies.
Chronic (Long Term) Toxicity:
Representative material passes IP-346, Modified Ames test, and/or
other screening tests.
Continuous long term contact with used motor oil has caused skin
cancer in animal tests.
12. Ecological Information
No specific aquatic data available for this product.
13. Disposal Considerations
Dispose of waste material according to Local, State, Federal, and
Waste from Residues:
Provincial Environmental Regulation.
No consideration given when disposed of according to local, state, and
Contaminated Packaging:
Federal regulations.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 5 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
173219 Level: 3
FIR No.:
US-US-6 Release Date: 2007-01-25
Version Number:
14. Transport Information
U.S. Department of Transportation (DOT) 49 - CFR 172.101
This product is not regulated as a dangerous good.
Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II
This product is not regulated as a dangerous good.
Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico)
This product is not regulated as a dangerous good.
International and Domestic Air Transportation - ICAO & IATA Section 4.2
This product is not regulated as a dangerous good.
International Water Transportation - IMDG Code Amendment 31-02
This product is not regulated as a dangerous good.
15. Regulatory Information
Don't pollute. Conserve resources. Return used oil to collection centers.
Used engine oils, while not a component of this material, is on the Proposition 65 list of chemicals known to the State of
California to cause cancer.
Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material
should be minimized to the greatest extent possible.
16. Other Information
Petroleum distillate base oils used in the product are severely hydrotreated and/or solvent refined.
Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit
value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit
The following sections contain revisions OR 10
NEW statements. 2
15
16
Preparation Information: The chemical identification and properties for this material were provided
by the manufacturer. For Canadian locations, a manufacturer's MSDS is
available upon request. Health and safety information has been
evaluated by the Occupational and Environmental Health Sciences
Department, Ford Motor Company, National Parts General
Office,MD74,29500 Plymouth Road, Livonia, MI 48150,USA.
Disclaimer: The information on this data sheet represents our current data and is
accurate to the best of our knowledge as to the proper handling of this
product under normal conditions and in accordance with the application
specified on the packaging and/or technical guidance literature. Any
other use of the product which involves using the product in combination
with any other product or any other process is the responsibility of the
user.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 6 / 7 Official Record
Application: MATS
O
Material Safety Data Sheet
173219 Level: 3
FIR No.:
US-US-6 Release Date: 2007-01-25
Version Number:
Attachment
Product Code Container Size Part of Kit Kit Product Code
XO-10W30-BSP Bulk
XO-10W30-DSP 55 U.S. Gallon Drum
XO-10W30-DSP1 55 U.S. Gallon Drum
XO-10W30-QSP 1 qt.
XO-10W30-QSP1 1 qt.
XO-10W30-RSP Railcar
XO-10W30-5QSP 5 qt.
XO-10W40-DP 55 U.S. Gallon Drum
XO-10W40-QP 1 qt.
XO-5W20-BSP Bulk
XO-5W20-DSP 55 U.S. Gallon Drum
XO-5W20-DSP1 55 U.S. Gallon Drum
XO-5W20-QSP 1 qt.
XO-5W20-QSP1 1 qt.
XO-5W20-RSP Railcar
XO-5W20-TSP 261 U.S. Gallon Tote
XO-5W20-5QSP 5 qt.
XO-5W30-BSP Bulk
XO-5W30-DSP 55 U.S. Gallon Drum
XO-5W30-DSP1 55 U.S. Gallon Drum
XO-5W30-QSP 1 qt.
XO-5W30-QSP1 1 qt.
XO-5W30-RSP Railcar
XO-5W30-TSP 261 U.S. Gallon Tote
XO-5W30-5QSP 5 qt.
PRINTED DOCUMENT IS TRANSIENT
Owner: Ford Motor Company Ford Proprietary
Page: 7 / 7 Official Record
Application: MATS
|