MSDS Number: 75Y-D016 __Description __
24 Hour Emergency:
CHEMTREC: 1-800-424-9300
Outside U.S. and Canada
Material Safety Chemtrec: 202-483-7616
NOTE: CHEMTREC, CANUTEC and National
Response Center emergency numbers to be used only
Data Sheet in the event of chemical emergencies involving a spill,
leak, fire, exposure or accident involving chemicals
Section 1 - Chemical Product / Company Information
LANE LITE YELLOW TWO-COMPONENT Revision
Product Name: 05/18/2006
POLYESTER TRAFFIC MARKING PAINT Date:
Identification Number: 75Y-D016 Supercedes : 05/18/2006
Product Use/Class: 55
Supplier: Aexcel Corporation Manufacturer: Aexcel Corporation
7373 Production Drive 7373 Production Drive
Mentor, OH 44060 Mentor, OH 44060
Preparer: Webb, Lorie
Section 2 - Composition / Information On Ingredients
Chemical Name CAS Number Weight % ACGIH TLV-TWA ACGIH TLV-STEL OSHA PEL-TWA OSHA PEL-CEILING
STYRENE MONOMER 100-42-5 33. 40 50 200 100
Section 3 - Hazards Identification
Emergency Overview: Flammable liquid and vapor.
Effects Of Overexposure - Eye Contact: Direct eye contact may cause irritation.
Effects Of Overexposure - Skin Contact: Skin irritant.
Effects Of Overexposure - Inhalation: Inhalation may cause irritation to the respiratory tract (nose, mouth, mucous membranes).
Effects Of Overexposure - Ingestion: Harmful: may cause lung damage if swallowed.
Effects Of Overexposure - Chronic Hazards: Chronic exposure may cause nausea and vomiting, higher exposure causes
unconsciousness.
Primary Route(s) Of Entry: Skin Contact, Inhalation, Ingestion, Eye Contact
This polyester is one part of a two-part system of traffic safety paints. In use, this polyester is combined with small amounts
of an organic peroxide to produce rapidly cured paint films. Organic peroxides are unstable in the presence of heat or
contaminants, such as strong acids, strong alkalies, strong oxiders, acetone and reducing agents. Handle these peroxides
with strict attention to the peroxide manufacturer's safety instructions.
file:///P|/MSDS/Product%20Vision%20MSDS/MSDS%20Number%2075Y-D016%20__Description%20__.htm (1 of 5)1/16/2007 2:23:43 PM
MSDS Number: 75Y-D016 __Description __
Section 4 - First Aid Measures
First Aid - Eye Contact: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Rinse
with plenty of water.
First Aid - Skin Contact: Wash off immediately with plenty of water.
First Aid - Inhalation: Move to fresh air in case of accidental inhalation of vapors.
First Aid - Ingestion: Call a physician immediately. Do not induce vomiting.
Section 5 - Fire Fighting Measures
Flash Point, F: 88
(TCC)
Extinguishing Media: Carbon Dioxide, Dry Chemical, Foam
Unusual Fire And Explosion Hazards: Remove all sources of ignition.
Special Firefighting Procedures: Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment.
Section 6 鈥? Accidental Release Measures
Steps To Be Taken If Material Is Released Or Spilled: Soak up with inert absorbent material and dispose of as hazardous waste.
Section 7 - Handling And Storage
Handling: Containers of this material may be hazardous when emptied. Handle in accordance with good industrial hygiene and
safety practice.
Storage: Harmful - Store away from foodstuffs.
Section 8 - Exposure Controls / Personal Protection
Engineering Controls: Local ventilation of emission sources may be necessary to maintain ambient concentrations below
recommended exposure limits.
Respiratory Protection: In the case of respirable dust and/or fumes, use self-contained breathing apparatus.
Skin Protection: Impervious gloves.
Eye Protection: Safety glasses with side-shields.
Hygienic Practices: Remove and wash contaminated clothing before re-use.
Section 9 - Physical And Chemical Properties
file:///P|/MSDS/Product%20Vision%20MSDS/MSDS%20Number%2075Y-D016%20__Description%20__.htm (2 of 5)1/16/2007 2:23:43 PM
MSDS Number: 75Y-D016 __Description __
Odor: Characteristic
Appearance: Heavy Yellow Liquid
Specific Gravity: 1.281
Physical State: Liquid
(See section 16 for abbreviation legend)
Section 10 - Stability And Reactivity
Conditions To Avoid: Avoid heat, sparks, open flame and other ignition sources.
Incompatibility: Keep away from strong oxidizing agents, heat and open flames.
Hazardous Decomposition Products: Carbon Monoxide and Carbon Dioxide
Hazardous Polymerization: Yes. Hazardous polymerization can occur. The presence of copper or copper alloys may
increase polymerization rate. Lack of inhibitor may also cause styrene to polymerize.
Stability: Unstable @ high temperatures and extended storage.
Section 11 - Toxicological Information
No Data.
Section 12 - Ecological Information
Ecological Information: Do not allow material to contaminate ground water system.
Section 13 - Disposal Information
Disposal Information: Contact waste disposal services. Do not flush into surface water or sanitary sewer system.
Section 14 - Transportation Information
DOT Proper Shipping Name: Paint, Flammable Liquids Packing Group: III
DOT Hazard Class: 3 Resp. Guide Page: 128
DOT UN/NA Number: 1263
Section 15 - Regulatory Information
CERCLA 鈥? SARA Hazard Category
This product has been reviewed according to the EPA 鈥楬azard Categories鈥? promulgated under Sections 311and 312 of the
Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet
the following categories:
file:///P|/MSDS/Product%20Vision%20MSDS/MSDS%20Number%2075Y-D016%20__Description%20__.htm (3 of 5)1/16/2007 2:23:43 PM
MSDS Number: 75Y-D016 __Description __
SARA Section 312:
Chemical Name CAS Number
STYRENE MONOMER 100-42-5
SARA Section 313:
This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund
Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
Chemical Name CAS Number
STYRENE MONOMER 100-42-5
Toxic Substances Control Act:
This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from
the United States:
None
U.S. State Regulations: As follows 鈥?
California Proposition 65:
Warning: The following ingredients present in the product are known to the state of California to cause Cancer:
None
Warning: The following ingredients present in the product are known to the state of California to cause birth defects, or other
reproductive hazards.
None
International Regulations: As follows 鈥?
CANADIAN WHMIS:
This MSDS has been prepared in compliance with Controlled Product Regulations except for the use of the 16 headings.
CANADIAN WHMIS CLASS:
Section 16 - Other Information
HMIS Ratings:
Health: 2 Flammability: 3 Reactivity: 1 Personal Protection:
VOLATILE ORGANIC COMPOUNDS, GR/LTR: 428.14
REASON FOR REVISION:
Legend: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
file:///P|/MSDS/Product%20Vision%20MSDS/MSDS%20Number%2075Y-D016%20__Description%20__.htm (4 of 5)1/16/2007 2:23:43 PM
MSDS Number: 75Y-D016 __Description __
The information contained on this MSDS has been checked and should be accurate. However, it is the responsibility of the user
to comply with all Federal, State, and Local laws and regulations.
file:///P|/MSDS/Product%20Vision%20MSDS/MSDS%20Number%2075Y-D016%20__Description%20__.htm (5 of 5)1/16/2007 2:23:43 PM
|