Page 1 6
Print Rev. Date 03/19/2008
MSDS Document
Product BOSS庐 Biggies Dual Sided Abrasive Wipes
1. Chemical Product and Company Identification
Trade Name of this Product BOSS庐 Biggies Dual Sided Abrasive Wipes
MSDS ID BOSS-BDS
Manufacturer Phone Number
Accumetric, LLC (270) 769-3385
350 Ring Road Emergency Phone
Elizabethtown, KY 42701 CHEMTREC (800) 424-9300
Revision Date 3/4/2008
2. Composition and Information on Ingredients
Ingredient CAS Number Weight % ACGIH TLV PEL STEL
Dimethyl Adipate 627-93-0 1% - 5%
Dimethyl Succinate 106-65-0 1% - 5%
Petroleum Distillate 64742-49-0 1% - 5%
Dimethyl Glutarate 1119-40-0 1% - 5%
Dipropylene glycol 34590-94-8 1% - 5%
methyl ether
3. Hazard Identification
Appearance
Cloth towelette impregnated with a translucent, fluorescent liquid.
Emergency Overview
Combustible liquid and vapor. May be irritating to the eyes and mucous membranes. Not
irritating to skin. Prolonged inhalation may cause respiratory irritation, dizziness, headache
and blurred vision. May be harmful if swallowed.
Eye Contact
May cause moderate irritation with possible eye injury.
Skin Contact
This product has been tested with human volunteers and found not to cause irritation.
Inhalation
Prolonged inhalation of vapor may cause respiratory irritation, headache, nausea, dizziness
Page 2 6
Print Rev. Date 03/19/2008
MSDS ID BOSS-BDS
BOSS庐 Biggies Dual Sided
Abrasive Wipes
and blurred vision.
Ingestion
May cause abdominal pain, nausea and irritation of mucous membranes.
4. First Aid Information
Eye Contact
Flush with running water for at least 15 minutes. Seek immediate medical attention.
Skin Contact
In cases of irritation, wash with plenty of soap and water, and temporarily discontinue use of
the material. Seek medical attention if irritation persists.
Inhalation
In case of dizziness or other symptoms as a result of prolonged inhalation, remove to fresh
air. Seek medical attention if irritation persists.
Ingestion
Call a poison control center or physician for advice. Do NOT induce vomiting. Rinse mouth
well with water and drink one glass of water.
5. Fire Fighting Measures
Flash Point 120F 49C
FP Method PMCC
Extinguishing Media
Alcohol Foam, Carbon Dioxide, Dry Chemical, Water Spray
Unsuitable Extinguishing Media
None known
Unusual Fire or Explosion Hazards
None known
Special Fire Fighting Procedures
Self-contained breathing apparatus and protective clothing should be worn when fighting
fires involving chemicals.
Combustion Products
Oxides of carbon and nitrogen.
6. Accidental Release Measures
Steps to be taken in case of spill or release
Avoid eye contact. Eliminate all sources of ignition and ventilate area. Contain spilled
material. Avoid releases to the environment. No special measures are necessary for the
wipes. Pick up and place in a container for disposal. If liquid is spilled, wipe up with a
Page 3 6
Print Rev. Date 03/19/2008
MSDS ID BOSS-BDS
BOSS庐 Biggies Dual Sided
Abrasive Wipes
suitable absorbent and place in a suitable container.
Local, state and federal laws and regulations may apply to releases and disposal of this
material, as well as those materials and items employed in the cleanup of releases. You will
need to determine which federal, state and local laws and regulations are applicable.
7. Handling and Storage
Handling
Avoid eye contact. Avoid breathing vapors. Wash after handling. Keep away from food.
Use in a well ventilated area. Keep product away from excessive heat, open flames and
other sources of ignition. Do not smoke while using.
Storage
Always store in original container, closed and at temperatures not exceeding 113F (45C).
Never expose to direct heat or sunlight.
8. Exposure Controls and Personal Protection
Exposure Control
Avoid eye contact. Do not inhale vapors for a prolonged period.
Component Exposure Limits
Dipropylene glycol methyl ether (34590-94-8)
OSHA PEL-TWA: 100 ppm skin
ACGIH TLV-TWA: 100 ppm skin
ACGIH TLV-STEL: 150 ppm
Dimethyl Glutarate (1119-40-0)
None Established
Petroleum Distillate (64742-49-0)
OSHA PEL-TWA: 500 ppm skin
ACGIH TLV-TWA: 300 ppm skin
Dimethyl Succinate (106-65-0)
None Established
Dimethyl Adipate (627-93-0)
None Establiahed
Isopropanol
OSHA PEL-TEA: 400 ppm
ACGIH TLV-TWA: 200 ppm
STEL TLV: 400 ppm
Eye Protection
None required for normal use of the product wipes.
Skin Protection
None required for normal use of the product wipes.
Page 4 6
Print Rev. Date 03/19/2008
MSDS ID BOSS-BDS
BOSS庐 Biggies Dual Sided
Abrasive Wipes
Respiratory Protection
Respiratory equipment not required.
9. Physical and Chemical Properties
Physical State Cloth towelette
Specific Gravity 1.04
pH 6.80 卤 0.70
IMPORTANT
The above information only applies to the liquid portion only.
Note
The above information is not intended for use in preparing product specifications. Contact
Accumetric LLC before writing specifications.
10. Stability and Reactivity
Stability
Stable under ambient conditions. Extrapolated shelf life is at least 18 months in the original
container.
Conditions to Avoid
Extreme temperatures. Sources of ignition. Static electricity.
Materials to Avoid / Incompatibility
Avoid contact with strong oxidizing agents.
Hazardous Decomposition Products
Thermal decomposition will yield oxides and carbon and nitrogen.
11. Toxicological Information
12. Ecological Information
Environmental Fate and Distribution
Complete information is not yet available.
Ecotoxicity
Highly toxic to aquatic organisms.
Persistance and Degradation
No information available; however the liquid is over 90% biodegradable.
BOD & COD
Not determined
Page 5 6
Print Rev. Date 03/19/2008
MSDS ID BOSS-BDS
BOSS庐 Biggies Dual Sided
Abrasive Wipes
13. Disposal Considerations
Product Disposal
The used wipe tissue should be disposed of according to local regulations for hazardous
materials, preferably in sealed containers.
Package Disposal
Packaging should be disposed of in accordance with regulations. Empty package does not
pose any special hazard.
Waste Disposal Method
We make no guarantee or warranty of any kind that the use or disposal of this product
complies with all local, state, or federal laws. It is also the obligation of each user of the
product mentioned herein to determine and comply with the requirements of all applicable
statutes.
This product is not known to be regulated under RCRA regulations, but contains SARA
regulated substances. Disposal of unused portions of this product and process waste
containing this product should be done only after a careful evaluation and in compliance
with all federal, local and state laws.
14. Transportation Information
Road & Rail Transport (US DOT and Canadian TDG)
Excepted from Hazmat in non-bulk packagings per 49 CFR 173.150(f) and TDG Section 1.33
Sea Transport (IMDG Code)
Class: 3
UN 1993
Packing Group: III
EMS Number: F-E, S-E
Marine Pollutant: No
Label: FLAMMABLE LIQUID, NOS ETHANOL (ethyl alcohol)
Air Transport (ICAO/IATA)
Class: 3
UN 1993
Packing Group: III
Label: FLAMMABLE LIQUID, NOS ETHANOL (ethyl alcohol)
15. Regulatory Information
The contents of this MSDS comply with the OSHA Hazard Communication Standard 29 CFR
1910.1200.
TSCA Status
All chemical substances found in this product comply with the Toxic Substances Control Act
inventory reporting requirements.
SARA Title III Section 302 Extremely Hazardous Substances
None
Page 6 6
Print Rev. Date 03/19/2008
MSDS ID BOSS-BDS
BOSS庐 Biggies Dual Sided
Abrasive Wipes
SARA Title III Section 304 CERCLA Hazardous Substances
None
SARA Title III Section 312 Hazard Class
Acute: Yes
Chronic: Yes
Fire: Yes
Pressure: No
Reactive: No
SARA Title III Section 313 Toxic Chemicals
n-Methyl-2-Pyrrolidone (872-50-4) 1.5%
California Proposition 65
This product contains the following chemical(s) listed by the State of California under the
Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to
cause cancer, birth defects or other reproductive harm:
N-Methyl-2-Pyrrolidone (872-50-4)
New Jersey
Dipropylene Glycol Methyl Ether (34590-94-8)
Ethyl Alcohol (64-17-5)
Pennsylvania
Dipropylene Glycol Methyl Ether (34590-94-8)
Ethyl Alcohol (64-17-5)
n-Methyl-2-Pyrrolidone (872-50-4)
16. Other Information
Disclaimer
The data contained herein is based upon information that Accumetric LLC believes to be
reliable. Users of this product have the responsibility to determine that suitability of use and
to adopt all necessary precautions to ensure the safety and protection of property and
persons involved in said use. All statements to suggestions are made without warranty,
expressed or implied, regarding the accuracy of the information, the hazards connected with
the use of the material or the results to be obtained from the use thereof.
|