TREMCO MATERIAL SAFETY DATA SHEET
1 - PRODUCT INFORMATION READ ALL DATA BELOW CAREFULLY FOR SAFER USE
---------------------------------------------------------------------------------------------
TRADE NAME : HIGH BUILD REFLECTIVE COATING MANUFACTURER:
CODE NUMBER : 344-07000 TREMCO CANADA DIVISION, RPM CANADA
WHMIS CLASS : NOT CONTROLLED 220 Wicksteed Avenue,
P.I.N. : Not regulated Toronto, Ontario.
PRODUCT USE : Roof coating EMERGENCY PHONE: 416-421-3300
2 - HAZARDOUS INGREDIENTS
---------------------------------------------------------------------------------------------
Ingredient :%Wt./wt.: CAS Number : LD50 mg/kg : LC50 mg/m3
---------------------------------------------------------------------------------------------
No hazardous ingredients according to WHMIS criteria
3 - PHYSICAL DATA
---------------------------------------------------------------------------------------------
APPEARANCE : White liquid
ODOUR : Mild acrylate odor
SOLUBILITY IN WATER : Miscible
VAPOUR DENSITY : Is heavier than air
EVAPORATION RATE : Is slower than Ether
SPECIFIC GRAVITY : 1.0
PERCENT VOLATILE WT/WT: 40-45
ADDITIONAL INFORMATION: No Information.
4 - FIRE OR EXPLOSION HAZARD
---------------------------------------------------------------------------------------------
FLASH POINT: Not applicable
MEANS OF EXTINCTION: Not applicable.
CONDITIONS OF FLAMMABILITY: This product is not expected to burn under normal conditions
of use.
HAZARDOUS COMBUSTION PRODUCTS: Not applicable. Not expected to burn.
5 - TOXICOLOGICAL PROPERTIES
---------------------------------------------------------------------------------------------
ROUTES OF ENTRY: SKIN CONTACT, INHALATION, INGESTION, EYE CONTACT
ACUTE EXPOSURE EFFECTS: EYES: May cause slight eye irritation. SKIN: May cause slight
irritation. INHALATION: May cause slight irritation to the respiratory system. INGESTION:
May cause slight irritation to the gastrointestinal system.
CHRONIC EXPOSURE EFFECTS: No serious long term effects anticipated with normal
precautions.
NOTES: No Information.
6 - FIRST AID: Get immediate medical attention for any significant overexposure
---------------------------------------------------------------------------------------------
GENERAL FIRST AID: EYES: Flush with water for at least 15 minutes while holding eyelids
apart. Get medical attention immediately after. INGESTION: Do not induce vomiting. Call
nearest Poison Control Center (for Toronto call 416-813-5900). If conscious 1-2 ounces of
water may be given. Do not provide large amounts of liquid unless advised by physician.
SKIN: Clean with soap and water. INHALATION: Remove person from exposure. Avoid further
overexposure.
7 - REACTIVITY DATA
---------------------------------------------------------------------------------------------
STABILITY CONDITIONS: Stable under normal conditions of use.
INCOMPATIBLE CLASSES: Not applicable under normal conditions of use.
8 - PREVENTIVE MEASURES
---------------------------------------------------------------------------------------------
PERSONAL PROTECTIVE EQUIPMENT: EYES: Use suitable chemical splash goggles if eye contact
is possible. SKIN: Use suitable impervious rubber or vinyl gloves and protective apparel
to reduce exposure. RESPIRATION: Generally not required.
ENGINEERING CONTROLS: General ventilation should be sufficient.
SPILLS LEAKS AND WASTE DISPOSAL: Use personal protective equipment. Stop flow, ventilate
41 19 2
MSDS code 344-07000E Page 1 of 2
Order Code: 34407000 805
area, contain spill. Use non-sparking, non-flammable tools. Absorb with suitable inert
material and transfer to suitable container for disposal. Dispose according to applicable
regulations (HAZARDOUS WASTE at Hazardous Household Waste Depot for Consumer Products or as
Liquid Industrial waste for industrial products.
HANDLING AND STORAGE PROCEDURES: KEEP OUT OF REACH OF CHILDREN. Avoid ingestion,
inhalation of vapours and skin or eye contact. Keep skin and apparel clean to reduce
exposure. Use personal protective equipment for spills, cleaning and repair of equipment.
Precautions apply also to empty containers. If spraying use a suitable dust/vapour
respirator to avoid inhalation of overspray. Store in sealed containers under normal
warehouse conditions, above freezing.
9 - PREPARATION INFORMATION: Deleted subcategories have no information available
---------------------------------------------------------------------------------------------
PREPARED BY: Sewnauth Raghunandan DATE PREPARED: 08/28/03 TELEPHONE: 416-421-3300
42 19 3
MSDS code 344-07000E Page 2 of 2
|