Material Safety Data Sheet
WALLTITE F - WHITE 5 GL
Version 1.4 Print Date 05/31/2008
REVISION DATE: 08/21/2007
SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION
Product Information
Trade name : WALLTITE F - WHITE 5 GL
Product code : 34487000 805
Supplier : Tremco Canada division
220 Wicksteed Avenue
Toronto, ON M4H 1G7
Telephone : (416) 421-3300
Emergency Phone: : (613) 996-6666
Product use : Coating
Preparation Information
Prepared by: : Sewnauth Raghunandan
Date: : 08/21/2007
Telephone : (416) 421-3300
SECTION 2 - HAZARDS IDENTIFICATION
Emergency Overview
White. Liquid. No serious effects anticipated under normal conditions of use. Leave area to breathe fresh air.
Avoid further overexposure. If symptoms persist, get medical attention.
Acute Potential Health Effects/ Routes of Entry
Inhalation No serious effects anticipated under normal conditions of use.
:
Eyes Direct contact may cause mild irritation.
:
Ingestion May cause gastrointestinal irritation, nausea, and vomiting.
:
Skin May cause mild irritation.
:
Aggravated Medical Conditions
Pre-existing eye, skin and respiratory disorders may be aggravated by exposure.
Chronic Health Effects
Inhalation of crystalline silica (quartz) can cause cancer based on animal data, and IARC concludes sufficient
evidence in humans (Group 1). Prolonged and repeated overexposure to free crystalline silica dust above the
TLV level may cause scarring of the lungs with cough and shortness of breath. A delayed lung injury, silicosis
may result from breathing free silica. Long term overexposure to propylene glycol caused liver abnormalities,
kidney damage in laboratory animals. Repeated excessive ingestion may cause central nervous system effects.
Overexposure to sublimed zinc oxide may produce symptoms known as "zinc oxide chills" which have no
recognized complications. Symptoms usually disappear within 24 hours. Fillers are encapsulated and not
expected to be released from product under normal conditions of use.
SECTION 3 : HAZARDOUS INGREDIENTS
Chemical Name CAS-No. Weight % Range
Titanium dioxide 13463-67-7 3.0 - 7.0
Propylene glycol 57-55-6 1.0 - 5.0
Zinc oxide 1314-13-2 1.0 - 5.0
1/5 34487000 805
Material Safety Data Sheet
WALLTITE F - WHITE 5 GL
Version 1.4 Print Date 05/31/2008
REVISION DATE: 08/21/2007
Crystalline Silica (Quartz)/ Silica Sand 14808-60-7 0.1 - 1.0
The ingredients listed above are hazardous as defined in the controlled products regulation. (CPR).
SECTION 4 - FIRST AID MEASURES
Get immediate medical attention for any significant overexposure.
Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get
medical attention.
Eye contact : Flush with water for 15 minutes. If irritation persists, get medical attention.
Skin contact : Wash area of contact thoroughly with hand cleaner followed by soap and water. If
irritation, rash or other disorders develop, get medical attention immediately.
Ingestion : Get medical attention. Do not induce vomiting.
Notes to physician : Not applicable.
SECTION 5: FIRE / EXPLOSION HAZARDS
Flash point : Not available.
Method : Not applicable.
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Extinguishing media : This product is not expected to burn under normal conditions of use.
Hazardous combustion : Carbon monoxide and carbon dioxide can form.Smoke, fumes.
products
Protective equipment for : Use accepted fire fighting techniques. Wear full firefighting protective
firefighters clothing, including self-contained breathing apparatus (SCBA).
Fire and explosion conditions : This product not expected to ignite under normal conditions of use.
SECTION 6 - SPILLS / LEAKS / ACCIDENTAL RELEASE MEASURES
Transfer to appropriate container for disposal. Stop flow. Contain spill. Keep out of water courses. Absorb
spill in sand, earth or other suitable material. Transfer to appropriate container for disposal. Use appropriate
protective equipment. Avoid contact with material.
SECTION 7 - HANDLING AND STORAGE
Handle in compliance with common hygienic practices. Clean hands thoroughly after handling. Keep from
freezing. Do not use in confined or poorly ventilated areas. Prevent inhalation of vapor, ingestion, and contact
with skin eyes and clothing. Keep container closed when not in use. Precautions also apply to emptied
containers. Store in sealed containers in a dry, ventilated warehouse location above freezing.
SECTION 8 - PREVENTIVE MEASURES/EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protection equipment
2/5 34487000 805
Material Safety Data Sheet
WALLTITE F - WHITE 5 GL
Version 1.4 Print Date 05/31/2008
REVISION DATE: 08/21/2007
Respiratory protection : Not required under normal conditions of use.Wear appropriate, NIOSH/MSHA
approved respirator with combination particulate filter and vapor/gas
removing cartridge when the ventilation is not adequate or if it is necessary to
abrade or grind surfaces coated with this product.
Hand protection : Use suitable impervious rubber or vinyl gloves and protective apparel to
reduce exposure.
Eye protection : Wear appropriate eye protection.Wear chemical safety goggles and/or face
shield to prevent eye contact. Do not wear contact lenses. Do not touch eyes
with contaminated body parts or materials. Have eye washing facilities readily
available.
Skin and body protection : Prevent contact with shoes and clothing. Use rubber apron and overshoes.
Protective measures : Other equipment not normally required.Use professional judgment in the
selection, care, and use.
Engineering measures : Not required under normal conditions of use.Use local exhaust when the
general ventilation is inadequate.
Exposure Limits
Chemical Name CAS Number Regulation Limit Form
Titanium dioxide 13463-67-7 Ontario TWA: 10 mg/m3 Total dust.
ACGIH TWA: 10 mg/m3
Zinc oxide 1314-13-2 Ontario TWA: 10 mg/m3 Total dust.
Ontario TWA: 5 mg/m3 Fume.
Ontario STEL: 10 mg/m3 Fume.
ACGIH TWA: 2 mg/m3 Respirable fraction.
ACGIH STEL: 10 mg/m3 Respirable fraction.
Ontario TWA: 2 mg/m3 Respirable.
Ontario STEL: 10 mg/m3 Respirable.
Crystalline Silica (Quartz)/ 14808-60-7 Ontario TWA: 0.10 mg/m3 Respirable fraction.
Silica Sand ACGIH TWA: 0.025 mg/m3 Respirable fraction.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State : Liquid
Form : Liquid
Color : White
Odor : MildAmmonia
pH : 9 - 10
Vapour pressure : Not available.
Vapor density : Heavier than air
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : 212 掳F, 100 掳
C
Water solubility : Soluble
3/5 34487000 805
Material Safety Data Sheet
WALLTITE F - WHITE 5 GL
Version 1.4 Print Date 05/31/2008
REVISION DATE: 08/21/2007
Evaporation Rate: : Not available.
Specific Gravity : 1.33
% Volatile Weight : 36 %
SECTION 10 - REACTIVITY / STABILITY
Substances to avoid : Strong acids.Strong bases.
Stability : Stable
Hazardous polymerization : Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
Propylene glycol, CAS-No.: 57-55-6
Acute oral toxicity (LD-50 oral) 30,000 mg/kg ( Rat ) 18,000 mg/kg ( Rabbit ) 19,000 mg/kg
( Dog ) 23,900 - 31,800 mg/kg ( Mouse ) 18,400 - 196,000
mg/kg ( Guinea pig )
Zinc oxide, CAS-No.: 1314-13-2
Acute oral toxicity (LD-50 oral) 7,950 mg/kg ( Mouse ) 7,950 mg/kg ( Mouse )
SECTION 12 - ECOLOGICAL INFORMATION
No Data Available
SECTION 13 - WASTE DISPOSAL CONSIDERATIONS
Disposal Method : Dispose as hazardous waste according to all local, state, federal and provincial
regulations.
SECTION 14 - TRANSPORTATION / SHIPPING DATA
TDG / DOT Shipping Description:
NOT REGULATED
SECTION 15 - REGULATORY INFORMATION
North American Inventories:
All components are listed or exempt from the TSCA inventory.
This product or its components are listed on, or exempt from the Canadian Domestic Substances List.
4/5 34487000 805
Material Safety Data Sheet
WALLTITE F - WHITE 5 GL
Version 1.4 Print Date 05/31/2008
REVISION DATE: 08/21/2007
Canadian Regulations:
WHMIS Classification : D2A, D2B
This is a "controlled product" under the Canadian Workplace Hazardous Materials Information System
(WHMIS).
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
(CPR) and the MSDS contains all of the information required by the CPR.
Other Regulations:
Regulatory VOC (less water and : 67 g/l
exempt solvent)
SECTION 16 - OTHER INFORMATION
HMIS Rating :
Health 1 0 = Minimum
1 = Slight
Flammability 0
2 = Moderate
Reactivity 0
3 = Serious
PPE
4 = Severe
Further information:
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.
Prepared by: Sewnauth Raghunandan
Legend
ACGIH - American Conference of Governmental Hygienists OSHA - Occupational Safety and Health Administration
DOT - Department of Transportation PEL - Permissible Exposure Limit
DSL - Domestic Substance List RCRA - Resource Conservation and Recovery Act
EPA - Environmental Protection Agency STEL - Short Term Exposure Limit
HMIS - Hazardous Materials Information System TLV - Threshold Limit Value
IARC - International Agency for Research on Cancer TSCA - Toxic Substances Control Act
MSHA - Mine Safety Health Administration TWA - Time Weighted Average
NDSL - Non-Domestic Substance List V - Volume
NIOSH - National Institute for Occupational Safety and Health VOC - Volatile Organic Compound
NTP - National Toxicology Program WHMIS - Workplace Hazardous Materials Information System
5/5 34487000 805
|