Material Safety Data Sheet
SRC FINISH COAT WHITE 5 GL
Version 1.3 Print Date 04/22/2008
REVISION DATE: 04/21/2008
SECTION 1 - PRODUCT IDENTIFICATION
Trade name : SRC FINISH COAT WHITE 5 GL
Product code : 352565 805
COMPANY : Tremco Incorporated
3735 Green Road
Cleveland, OH 44122
Telephone : (216) 292-5000 8:30 - 5:00 EST
Emergency Phone: : (216) 765-6727 8:30 - 5:00 EST
After Hours: Chemtrec 1-800-424-9300
Product use : Coating
SECTION 2 - HAZARDS IDENTIFICATION
Emergency Overview
White. Liquid. May cause drowsiness, weakness, and fatigue. Vapor and/or mist may irritate nose and throat.
May cause moderate irritation to the respiratory system. May cause allergic respiratory sensitization. Move to
fresh air. If required, artificial respiration or administration of oxygen can be performed by trained personnel.
Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get medical attention.
Acute Potential Health Effects/ Routes of Entry
Inhalation May cause drowsiness, weakness, and fatigue. Vapor and/or mist may irritate nose and
:
throat. May cause moderate irritation to the respiratory system. May cause allergic
respiratory sensitization.
Eyes Vapor and/or mist may cause eye irritation.
:
Ingestion May cause irritation to the mouth, throat and stomach. May cause gastrointestinal
:
irritation, nausea, and vomiting.
Skin May cause sensitization resulting in irritation, itching and redness.
:
Aggravated Medical Conditions
Pre-existing eye, skin, liver, kidney, and respiratory disorders may be aggravated by exposure.
Chronic Health Effects
Overexposure may cause dermatitis, asthma, skin and respiratory sensitization and decreased lung function.
Repeated overexposure to vapors and/or material may injure the liver, kidneys and respiratory system unless
suitable engineering controls and/or personal protective equipment are used. Prolonged or repeated exposure
to xylene may cause defatting, drying, and irritation of the skin, dermatitis, central nervous system (CNS)
effects, heart muscle sensitization and arrhythmia, hearing loss, and brain, liver, kidney damage. Xylene
overexposure may affect fetal development. The International Agency for Research on Cancer (IARC) has
evaluated ethylbenzene and classified it as a possible human carcinogen (Group 2B) based on sufficient
evidence for carcinogenicity in experimental animals, but inadequate evidence for cancer in exposed humans.
Prolonged and repeated exposure to excessive airborne concentrations of talc can result in scarring of the
lungs (pneumoconiosis) or the covering of the lungs (pleural thickening). Fillers are encapsulated and not
expected to be released from product under normal conditions of use.
Target Organs: Eye, Lung, Liver, Kidney, Skin, Nerve
1/7 352565 805
Material Safety Data Sheet
SRC FINISH COAT WHITE 5 GL
Version 1.3 Print Date 04/22/2008
REVISION DATE: 04/21/2008
SECTION 3 - PRODUCT COMPOSITION
Chemical Name CAS-No. Weight %
Polyurethane Polymer NJ TSRN# 51721300-5379P 40.0 - 70.0
Xylene 1330-20-7 15.0 - 40.0
Titanium dioxide 13463-67-7 15.0 - 40.0
Talc 14807-96-6 7.0 - 13.0
Ethylbenzene 100-41-4 5.0 - 10.0
Amorphous silica 7631-86-9 1.0 - 5.0
Isophorone Diisocyanate 4098-71-9 - <1.0
SECTION 4 - FIRST AID MEASURES
Get immediate medical attention for any significant overexposure.
Inhalation : Move to fresh air. If required, artificial respiration or administration of oxygen can be
performed by trained personnel.Leave area to breathe fresh air. Avoid further
overexposure. If symptoms persist, get medical attention.
Eye contact : Flush with water for at least 15 minutes while holding eye lids apart. Get medical
attention immediately.
Skin contact : Wash area of contact thoroughly with hand cleaner followed by soap and water. If
irritation, rash or other disorders develop, get medical attention immediately.
Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control
Center or Physician immediately.
SECTION 5 - FIRE FIGHTING MEASURES
Flash point : 80 掳 27 掳
F, C
Method : Setaflash Closed Cup
Lower explosion limit : 1.0 %(V) Solvent
Upper explosion limit : 7.0 %(V) Solvent
Autoignition temperature : Not available.
Extinguishing media : If water fog is ineffective, use carbon dioxide, dry chemical or foam.
Hazardous combustion : Carbon monoxide and carbon dioxide can form.Smoke,
products fumes.Hydrocyanic acid and nitrogen oxides can form.
Protective equipment for : Use accepted fire fighting techniques. Wear full firefighting protective
firefighters clothing, including self-contained breathing apparatus (SCBA).
Fire and explosion conditions : Product may ignite if heated in excess of its flash point.Closed
container, may burst when exposed to extreme heat.Empty containers
may contain ignitable vapors.Vapors may travel to sources of ignition
and flashback.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Use appropriate protective equipment. Avoid contact with material. Remove sources of ignition immediately.
2/7 352565 805
Material Safety Data Sheet
SRC FINISH COAT WHITE 5 GL
Version 1.3 Print Date 04/22/2008
REVISION DATE: 04/21/2008
Stop flow of material if safe to do so. Contain spill and keep out of water courses. Ventilate area.
SECTION 7 - HANDLING AND STORAGE
Prevent inhalation of vapor, ingestion, and contact with skin eyes and clothing. Keep container closed when
not in use. Precautions also apply to emptied containers. Change soiled work clothes frequently. Clean hands
thoroughly after handling. Do not smoke, weld, generate sparks, or use flame near container. To prevent
generation of static discharges, use bonding/grounding connection when pouring liquid. Extinguish all ignition
sources including pilot lights, non-explosion proof motors and electrical equipment until vapors dissipate. Store
under dry warehouse conditions away from heat and all ignition sources.
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Personal protection equipment
Respiratory protection : Wear appropriate, properly fitted NIOSH/MSHA approved respirator when
airborne contaminant level(s) are expected to exceed exposure limits
indicated on the MSDS. Select positive pressure supplied air respirator
(TC19C or equivalent) for isocyanates.
Hand protection : Use suitable impervious nitrile or neoprene gloves and protective apparel to
reduce exposure.
Eye protection : Wear appropriate eye protection.Wear chemical safety goggles and/or face
shield to prevent eye contact. Do not wear contact lenses. Do not touch eyes
with contaminated body parts or materials. Have eye washing facilities readily
available.
Skin and body protection : Prevent contact with shoes and clothing.
Protective measures : Use professional judgment in the selection, care, and use.
Engineering measures : Use only in well ventilated areas. Provide maximum ventilation in enclosed
areas.Use local exhaust when the general ventilation is inadequate.
Exposure Limits
Chemical Name CAS Number Regulation Limit Form
Xylene 1330-20-7 ACGIH TWA: 100 ppm
ACGIH STEL: 150 ppm
OSHA PEL: 435 mg/m3
Titanium dioxide 13463-67-7 ACGIH TWA: 10 mg/m3
OSHA PEL: 15 mg/m3 Total dust.
OSHA TWA: 15 mg/m3 Total dust.
OSHA TWA: 5 mg/m3 Respirable fraction.
Talc 14807-96-6 ACGIH TWA: 2 mg/m3 Respirable fraction.
OSHA TWA: 0.1 mg/m3 Respirable.
OSHA TWA: 0.3 mg/m3 Total dust.
OSHA PEL: 15 mg/m3 Total dust.
OSHA PEL: 5 mg/m3 Respirable fraction.
Ethylbenzene 100-41-4 ACGIH TWA: 100 ppm
ACGIH STEL: 125 ppm
OSHA PEL: 435 mg/m3
3/7 352565 805
Material Safety Data Sheet
SRC FINISH COAT WHITE 5 GL
Version 1.3 Print Date 04/22/2008
REVISION DATE: 04/21/2008
Chemical Name CAS Number Regulation Limit Form
Amorphous silica 7631-86-9 ACGIH TWA: 3 mg/m3 Respirable particles.
ACGIH TWA: 10 mg/m3 Inhalable particles.
OSHA PEL: 15 mg/m3 Total dust.
OSHA PEL: 5 mg/m3 Respirable fraction.
OSHA TWA: 0.8 mg/m3
Isophorone Diisocyanate 4098-71-9 ACGIH TWA: 0.005 ppm
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Form : Liquid
Color : White
Odor : Aromatic
pH : Not available.
Vapour pressure : Not available.
Vapor density : Heavier than air
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : Not available.
Water solubility : Negligible
Specific Gravity : 1.17
% Volatile Weight : 27 %
SECTION 10 - REACTIVITY / STABILITY
Substances to avoid : Strong acids.Strong bases.Amines.Water or moisture.Alcohols.
Stability : Material is stable under normal storage, handling, and use.
Hazardous polymerization : Will not occur under normal conditions.
SECTION 11 - TOXICOLOGICAL INFORMATION
Xylene, CAS-No.: 1330-20-7
Acute oral toxicity (LD-50 oral) 4,300 mg/kg ( Rat ) 1,590 mg/kg ( Mouse ) 6,670 mg/kg (
Rat ) 3,523 - 8,600 mg/kg ( Rat ) 5,627 mg/kg ( Mouse )
Acute inhalation toxicity (LC-50) 6,350 mg/l for 4 h ( Rat ) 3,907 mg/l for 6 h ( Mouse ) 8,000
mg/l for 4 h ( Rat )
Ethylbenzene, CAS-No.: 100-41-4
Acute oral toxicity (LD-50 oral) 5,460 mg/kg ( Rat ) 3,500 mg/kg ( Rat )
Acute dermal toxicity (LD-50 dermal) 17,800 mg/kg ( Rabbit )
Amorphous silica, CAS-No.: 7631-86-9
Acute oral toxicity (LD-50 oral) 22,500 mg/kg ( Rat ) 22,500 mg/kg ( Rat ) 15,000 mg/kg (
Mouse ) 15,000 mg/kg ( Mouse )
4/7 352565 805
Material Safety Data Sheet
SRC FINISH COAT WHITE 5 GL
Version 1.3 Print Date 04/22/2008
REVISION DATE: 04/21/2008
Isophorone Diisocyanate, CAS-No.: 4098-71-9
Acute oral toxicity (LD-50 oral) 1,000 mg/kg ( Rat ) 2,500 mg/kg ( Mouse ) 2,500 mg/kg (
Mouse ) 1,000 mg/kg ( Rat )
Acute inhalation toxicity (LC-50) 0.033 mg/l ( Rat ) 0.123 mg/l ( Rat ) 0.033 mg/l for 4 h ( Rat
) 0.123 mg/l for 4 h ( Rat )
Acute dermal toxicity (LD-50 dermal) 1,060 mg/kg ( Rat ) 1,060 mg/kg ( Rat )
SECTION 12 - ECOLOGICAL INFORMATION
No Data Available
SECTION 13 - DISPOSAL CONSIDERATIONS
RCRA Class : D001: Reportable Quantity = 100 lbs. (Characteristic of ignitability)
This classification applies only to the material as it was originally produced.
Disposal Method : Subject to hazardous waste treatment, storage, and disposal requirements under
RCRA. Recycle or incinerate waste at EPA approved facility or dispose of in
compliance with federal, state and local regulations.
SECTION 14 - TRANSPORTATION / SHIPPING DATA
TDG / DOT Shipping Description:
PAINT, 3, UN1263, PG III
SECTION 15 - REGULATORY INFORMATION
North American Inventories:
All components are listed or exempt from the TSCA inventory.
This product or its components are listed on, or exempt from the Canadian Domestic Substances List.
U.S. Federal Regulations:
SARA 313 Components : Xylene 1330-20-7
Ethylbenzene 100-41-4
SARA 311/312 Hazards : Acute Health Hazard
Fire Hazard
OSHA Hazardous Components :
Xylene 1330-20-7
Titanium dioxide 13463-67-7
Talc 14807-96-6
Ethylbenzene 100-41-4
Amorphous silica 7631-86-9
Isophorone Diisocyanate 4098-71-9
OSHA Status: Considered : Irritant
hazardous based on the
5/7 352565 805
Material Safety Data Sheet
SRC FINISH COAT WHITE 5 GL
Version 1.3 Print Date 04/22/2008
REVISION DATE: 04/21/2008
following criteria:
OSHA Flammability : IC
Regulatory VOC (less water and : 318 g/l
exempt solvent)
VOC Method 310 : 27 %
U.S. State Regulations:
MASS RTK Components : Xylene 1330-20-7
Titanium dioxide 13463-67-7
Talc 14807-96-6
Ethylbenzene 100-41-4
Amorphous silica 7631-86-9
Isophorone Diisocyanate 4098-71-9
Penn RTK Components : Polyurethane Polymer NJ TSRN# 51721300-5379P
Xylene 1330-20-7
Titanium dioxide 13463-67-7
Talc 14807-96-6
Ethylbenzene 100-41-4
Amorphous silica 7631-86-9
NJ RTK Components : Polyurethane Polymer NJ TSRN# 51721300-5379P
Xylene 1330-20-7
Titanium dioxide 13463-67-7
Talc 14807-96-6
Ethylbenzene 100-41-4
WARNING! Contains chemicals known to the State of California to cause cancer, birth defects and/or other
reproductive harm:
100-41-4 Ethylbenzene
108-88-3 Toluene
SECTION 16 - OTHER INFORMATION
HMIS Rating :
Health 2 0 = Minimum
1 = Slight
Flammability 3
2 = Moderate
Reactivity 1
3 = Serious
PPE
4 = Severe
Further information:
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.
Prepared by: Rich Mikol
Legend
ACGIH - American Conference of Governmental Hygienists PEL - Permissible Exposure Limit
6/7 352565 805
Material Safety Data Sheet
SRC FINISH COAT WHITE 5 GL
Version 1.3 Print Date 04/22/2008
REVISION DATE: 04/21/2008
CERCLA - Comprehensive Environmental Response, Compensation, and
RCRA - Resource Conservation and Recovery Act
Liability Act
DOT - Department of Transportation RTK - Right To Know
DSL - Domestic Substance List SARA - Superfund Amendments and Reauthorization Act
EPA - Environmental Protection Agency STEL - Short Term Exposure Limit
HMIS - Hazardous Materials Information System TLV - Threshold Limit Value
IARC - International Agency for Research on Cancer TSCA - Toxic Substances Control Act
MSHA - Mine Safety Health Administration TWA - Time Weighted Average
NDSL - Non-Domestic Substance List V - Volume
NIOSH - National Institute for Occupational Safety and Health VOC - Volatile Organic Compound
WHMIS - Workplace Hazardous Materials Information
NTP - National Toxicology Program
System
OSHA - Occupational Safety and Health Administration
7/7 352565 805
|