MATERIAL SAFETY DATA SHEET EPOXY TECHNOLOGY
14 FORTUNE DRIVE
PRODUCT NAME: EPO-TEK OG198-52 BILLERICA, MA 01821
Single Component
EMERGENCY PHONE:
*HMIS: HEALTH- 2 FIRE-1 REACTIVITY- 0 US/CANADA: 800-255-3924
INT鈥橪 COLLECT: + 813-248-0585
Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 12/27/01
REV: A
* HMIS CODE ratings are estimated by Epoxy Technology.
____________________________________________________________________________________________
I. IDENTIFICATION & PHYSICAL DATA
PERCENT VOLATILE: NA VAPOR PRESSURE: NA
BOILING POINT: NA SOLUBILITY IN WATER: NA.
VAPOR DENSITY: NA EVAPORATION RATE:
APPEARANCE: LightYellow Liquid SPECIFIC GRAVITY: NA
ODOR: Slight
____________________________________________________________________________________________
II. HAZARDOUS INGREDIENTS CAS # WT % TOXICITY DATA
Bisphenol F 28064-14-4 25-50% See Ingredient Sheet 110201
Reaction product of epichlorohydrin & bisphenol A 025085-99-8 5-25% See Ingredient Sheet 110104
Bisphenol F and Reaction product of epichlorohydrin & bisphenol A both require reporting according to OSHA鈥檚
Hazardous Communication Standards.
____________________________________________________________________________________________
III. FIRE & EXPLOSION DATA
FLASH POINT: >200 F
EXTINGUISHING MEDIA: Dry chemical, foam, carbon dioxide. Water may be ineffective.
UNUSUAL FIRE & EXPLOSION HAZARDS: Vapors may flow along surfaces to distant ignition sources and flash
back. Closed containers exposed to heat may explode.
SPECIAL FIRE FIGHTING PROCEDURES: Wear self contained breathing apparatus and complete personal
protective equipment. Remove all ignition sources. Use a water spray to cool fire exposed containers.
____________________________________________________________________________________________
IV. REACTIVITY DATA
STABILITY: Stable HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: Excessive heat, sources of ignition, flame. Direct sunlight will polymerize adhesive
MATERIALS TO AVOID: Strong acids or alkalies
HAZARDOUS DECOMPOSITION PRODUCTS: Fumes produced when heated to decomposition may include carbon
monoxide, and carbon dioxide.
____________________________________________________________________________________________
The information and recommendations contained in this MSDS have been compiled from sources believed to be
reliable and to represent the most reasonable current opinion on the subject when the MSDS was prepared. No
warranty, guarantee, or representation is made as to the correctness or sufficiency of the sufficiency of the
information. The user of this product must decide what measures are necessary to safely use this product, either
alone or in the combination with other products, and to determine its environmental regulatory compliance obligations
under applicable federal or state laws.
V. HEALTH HAZARD DATA EPO-TEK OG198-52
EFFECTS OF OVER EXPOSURE
INGESTION: No specific information available.
INHALATION: Prolonged breathing of vapor may be irritating and may cause nausea
and vomiting.
SKIN CONTACT: Can cause dermatitis.
EYE CONTACT: Irritating to the eyes. Can cause injury.
CHRONIC EFFECTS OF OVER EXPOSURE: Combinations of the above conditions can
be experienced.
EMERGENCY & FIRST AID PROCEDURES
EYE CONTACT: In case of eye contact, flush with water for at least 15 minutes.
Get medical attention immediately.
SKIN CONTACT: In case of skin contact, clean with soap and water. Do not use
solvents. Remove contaminated clothing.
INGESTION: Get medical attention immediately.
INHALATION: Remove employee to fresh air. If discomfort persists, get medical
attention.
____________________________________________________________________________________________
VI. SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS SPILLED: Eliminate ignition
sources. Use eye and skin protection. Place leaking containers in a well ventilated area.
Absorb spillage with inert material and dispose. Wear self contained breathing
apparatus.
WASTE DISPOSAL METHOD: Incinerate or use hazardous waste treatment
procedures that are in accordance with federal, state and local regulations. Do not
discharge into natural water sources.
____________________________________________________________________________________________
VII. SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: Wear an NIOSH approved respirator for organic
vapors whenever high level exposure to vapors or mist is anticipated.
VENTILATION: Locale exhaust recommended for exposure control.
PROTECTIVE GLOVES: Impervious gloves - neoprene or equivalent. A combination
of barrier cream and gloves is recommended.
EYE PROTECTION: Chemical splash goggles recommended.
OTHER PROTECTIVE EQUIPMENT: For operations where contact can occur, use a
face shield and impervious apron. A safety shower and eye wash facility should be
available.
____________________________________________________________________________________________
VIII. SPECIAL PRECAUTIONS: Avoid contact with skin and eyes. Avoid breathing vapors. Keep containers closed
when not in use. Remove all contaminated clothing immediately and wash. Wash skin thoroughly with soap and
water after handling. Solvents should not be used to clean skin because of increased penetration potential -
protective skin oils can be dissolved by solvents.
REGULATORY INFORMATION EPOXY TECHNOLOGY
14 FORTUNE DRIVE
BILLERICA, MA 01821
PRODUCT NAME: EPO-TEK OG198-52 Tel: (978) 667-3805
DATE REVISED: 12/27/01
REV: A
SARA TITLE III SECTION 313 SUPPLIER NOTIFICATION
This product contains the following toxic chemicals subject to the reporting requirements of Section 313 of the
Emergency Planning and Community Right To Know Act of 1986 (40 CFR 372): None
1. TSCA Inventory Status
All the components of this product are listed on the TSCA Inventory.
2. RCRA Status
This product contains the following chemicals listed on the 40 CFR Part 261.33: None
3. CERCLA Status
This product contains the following chemicals listed on the 40 CFR Part 302.4: None
4. Transportation
Not Restricted
______________________________________________________________________________________
The information contained herein is given in good faith. However, no guarantee or warranty of any kind expressed or
implied is made with respect to this information.
INGREDIENT SHEET EPOXY TECHNOLOGY
14 FORTUNE DRIVE
BILLERICA, MA 01821
EMERGENCY PHONE:
INGREDIENT CODE NUMBER: 110201 US/CANADA: 800-255-3924
INT鈥橪 COLLECT: + 813-248-0585
*HMIS: HEALTH (2) FLAMMIBILITY (1) DATE ISSUED: 8/18/00
REACTIVITY (0)
CARCINOGEN: NTP (No) IARC (No) OSHA (No)
*HMIS CODE rating are estimated by Epoxy Technology
I. IDENTIFICATION & PHYSICAL DATA
Color: Clear
Odor: Slight
Physical State: Liquid
Solubility in Water: Insoluable
Vapor Pressure: <0.01 mm Hg@20掳C
Specific Gravity: 1.19
Boiling Point: >200掳C
II. HAZARDOUS INGREDIENTS WT% CAS
Bisphenol F 100% 28064-14-4
TOXICITY DATA
Acute Oral Effects (LD50): Rat: > 10,000mg/kg
Acute Dermal Toxity (LD50): Rabbit: 3,000mg
Inhalation Toxicity (LC50): LCLO=1.7mg
III. FIRE AND EXPLOSION DATA
FLASH POINT: >200F
EXTINGUISHING MEDIA: Carbon dioxide, foam, dry chemical, water spray.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Decomposition and combustion products may be toxic.
FIRE FIGHTING EQUIPMENT: Use self-contained breathing apparatus.
IV. REACTIVITY DATA
STABILITY: Stable
CONDITIONS TO AVOID: Avoid strong acids or bases in bulk and elevated temperatures.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, aldehydes.
HAZARDOUS POLYMERIZATION: Will not occur
The information and recommendations contained in this Material Safety Data Sheet have been compiled from
sources believed to represent current opinion on the subject when the MSDS was prepared. No warranty, guarantee
or representation is made as to the correctness or sufficiency of the information. The user of this product, must
decide what safety measures are necessary to safely use this product, whether alone or in combination with other
products, and determine its environmental regulatory compliance obligations under applicable federal or state laws.
110201
V. HEALTH HAZARD DATA
EFFECTS OF OVER EXPOSURE
INGESTION: No specific information available.
INHALATION: No specific information available.
SKIN CONTACT: May cause skin irritation, dermatitis.
EYE CONTACT: Irritating to the eyes. May cause injury.
CHRONIC EFFECTS OF OVER EXPOSURE: May cause dermatitis if it gets on your skin.
EMERGENCY & FIRST AID PROCEDURES
EYE CONTACT: In case of eye contact, flush with water for at least 15 minutes. Get
medical attention immediately.
SKIN CONTACT: In case of skin contact, clean with soap and water. Do not use
solvents. Remove contaminated clothing.
INGESTION: Get medical attention immediately.
INHALATION: Remove employee to fresh air. If discomfort persists, get medical
attention.
VI. SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS SPILLED: Avoid personal contact. Take up with
absorbent material and shovel into a closed container.
WASTE DISPOSAL METHOD: Employ waste disposal procedures that are in accordance with
federal, state and local regulations.
VII. SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: Wear an approved respirator whenever exposure to air born
vapors is anticipated.
VENTILATION: Locale exhaust recommended for exposure control.
PROTECTIVE GLOVES: Impervious gloves-neoprene or equivalent. A combination of barrier
cream and gloves is recommended.
EYE PROTECTION: Chemical splash goggles recommended.
OTHER PROTECTIVE EQUIPMENT: For operations where contact can occur, use a face shield
and impervious apron. A safety shower and eye wash facility should be available.
_____________________________________________________________________________________________
VIII. SPECIAL PRECAUTIONS: Avoid contact with skin and eyes. Avoid breathing vapors generated by heating.
Keep containers closed when not in use. Remove all contaminated clothing and wash.
INGREDIENT SHEET EPOXY TECHNOLOGY
14 FORTUNE DRIVE
BILLERICA, MA 01821
EMERGENCY PHONE:
INGREDIENT CODE NUMBER: 110104 US/CANADA: 800-255-3924
INT鈥橪 COLLECT: + 813-248-0585
*HMIS: HEALTH (1) FLAMMIBILITY (1) DATE ISSUED: 03/05/2003
REACTIVITY (1
CARCINOGEN: NTP (No) IARC (No) OSHA (No)
*HMIS CODE rating are estimated by Epoxy Technology
I. IDENTIFICATION & PHYSICAL DATA
Color: Colorless to slight Yellow
Odor: Slight
Physical State: Liquid
Solubility in Water: None
Vapor Pressure: NA
Specific Gravity: 1.16
Boiling Point: NA
II. HAZARDOUS INGREDIENTS WT % CAS #
Reaction product of epichlorohydrin & bisphenol A 100% 025085-99-8
TOXICITY DATA
Skin(LD50): in rabbits is 20,000mg/kg.
Ingestion(LD50): in rats is >5000mg/kg
Mutagenicity: Animal mutagenicity, studies were negative.
III. FIRE AND EXPLOSION DATA
FLASH POINT: 485 F
EXTINGUISHING MEDIA: Foam, CO2, dry chemical.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None Known
FIRE FIGHTING EQUIPMENT: Wear positive pressure self-contained breathing apparatus and full protective
equipment.
IV. REACTIVITY DATA
STABILITY: Stable
CONDITIONS TO AVOID: Avoid storage at high temperatures.
HAZARDOUS DECOMPOSITION PRODUCTS: None Known.
HAZARDOUS POLYMERIZATION: Will not occur
The information and recommendations contained in this Material Safety Data Sheet have been compiled from
sources believed to represent current opinion on the subject when the MSDS was prepared. No warranty, guarantee
or representation is made as to the correctness or sufficiency of the information. The user of this product must
decide what safety measures are necessary to safely use this product, whether alone or in combination with other
products, and determine its environmental regulatory compliance obligations under applicable federal or state laws.
V. HEALTH HAZARD DATA
EFFECTS OF OVER EXPOSURE
None Established.
EMERGENCY & FIRST AID PROCEDURES
EYE CONTACT: Flush eyes with plenty of water.
SKIN CONTACT: Wash off in flowing water or shower.
INGESTION: No adverse effects anticipated by this route of exposure incidental to proper
industrial handling.
INHALATION: No adverse effects anticipated by this route of exposure.
VI. SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS SPILLED: Soak up in absorbent material such as
sand, or polypropylene or polyethylene fiber products and collect in suitable containers. Residual
resin may be removed using steam or hot soapy water.
WASTE DISPOSAL METHOD: Employ waste disposal procedures that are in accordance with
federal, state and local regulations.
VII. SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: Wear an approved respirator whenever exposure to air born
vapors is anticipated.
VENTILATION: Locale exhaust recommended for exposure control.
PROTECTIVE GLOVES: Impervious gloves-neoprene or equivalent. A combination of barrier
cream and gloves is recommended.
EYE PROTECTION: Chemical splash goggles recommended.
OTHER PROTECTIVE EQUIPMENT: For operations where contact can occur, use a face shield
and impervious apron. A safety shower and eye wash facility should be available.
_____________________________________________________________________________________________
VIII. SPECIAL PRECAUTIONS: Avoid contact with skin and eyes. Avoid breathing vapors generated by heating.
Keep containers closed when not in use. Remove all contaminated clothing and wash.
|