AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
Fastflor庐 CR
PRODUCT: PART A REVISION DATE: January 30, 2007
USAGE: PART A OF A 2 COMPONENT EPOXY RESIN COATING (A & B)
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not Regulated WHMIS Classification: D2B
UN NUMBER: Not Applicable Class: Not Regulated
Packaging Group: Not applicable
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50(mg/kg) LC50
(species, route) (species, route)
LIQUID EPOXY 025068-38-6
60-100 N.A. 11400 (oral, rat) N.A
RESIN
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Liquid Boiling Point: Not established
Appearance and Odor: Various colors, ether odor Freezing Point: Not established
Density: 1.2 g/ml
Odor Threshold: Not available Water Solubility: No
Evaporation Rate: Not available PH: Not established
Vapor Density: Not available % volatility: Not established
Vapor Pressure: Not available Water/Oil Distribution: Oil Soluble
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Fastflor庐 CR
PRODUCT: PART A
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not regulated
Flammable upper limits (% vol.): Not applicable
If Yes, under what conditions: Liquid will maintain Flammable lower limits (% vol.): Not applicable
> 93.3oC (TCC)
combustion during a fire. Flash Point (method used):
Auto-ignition temperature: Not established
Dangerous Combustion Products: Carbon oxides
and toxic organic
Extinguishing methods: Carbon dioxide, water vapors.
fog, foam or dry
chemical. Protect from mechanical impact: No
Special Methods: Firefighters should wear Protect from static discharge: No
full protective clothing
including self-contained
breathing apparatus
since toxic gases are
emitted. Cool fire-
exposed containers with
water or water fog.
SECTION V: REACTIVITY DATA
Chemical stability: Stable but Dangerous decomposition products: Carbon oxides
If not, under what conditions. avoid excessive and toxic organic
heat, an open vapors may be
flame and all formed during
other ignition combustion.
sources.
Polymerization Risks: Will not occur.
Incompatibility with other material: Yes
If Yes, which ones: Avoid heat, flame
and contact with
strong oxidizing
agents. Can
react vigorously
with Lewis acids
or mineral acids
and strong
mineral and
organic bases,
especially
primary and
secondary
aliphatic amines
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Fastflor庐 CR
PRODUCT: PART A
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause eye irritations. Carcinogenicity: No
Skin: May be irritating to the skin, may cause Toxic effects
sensitization. on reproduction: No
Inhalation: May irritate lungs, may cause an allergic Teratogenicity: No
reaction.
Mutagenicity: No
Ingestion: May cause irritation to the gastro-
intestinal system. Product with synergistic
effects: Not established
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Fastflor庐 CR
PRODUCT: PART A
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves Ventilation: Sufficient ventilation required.
Respiratory equipment: Not necessary under normal use. Procedure in case
of leaks: Absorb with sand or other
Eyes: Safety glasses absorbent material. Residue may
be removed with steam or hot
Shoes: Leather water and soap. All precautions
should be taken when cleaning
Clothing: Rubber apron the spill with solvent.
Other: Eye wash station, shower Handling and Equipment
Methods: Avoid skin, eye and clothing
contact.
Warehouse
Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.
Special Shipping
Instructions: See TDG class.
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Fastflor庐 CR
PRODUCT: PART A
SECTION VIII: FIRST AID
Skin: Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes: Rinse eyes immediately with plenty of water for at least 15 minutes to ensure
a proper wash.
Consult a physician immediately.
Inhalation: In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion: Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By: Steve Gosselin
Telephone #: (514) 697-2610
Fax #: (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
Fastflor庐 CR
PRODUCT: PART B REVISION DATE: January 30, 2007
USAGE: A 2 COMPONENT EPOXY COATING
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Paint Related Material WHMIS Classification: D2B, E
UN NUMBER: 3066 Class: 8
Packaging Group: III
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD 50 (mg/kg) LC50
(species, route) (species, route)
30-60
ALIPHATIC AMINE Not available MIXTURE Not available Not available
100-51-6 4000 mg/m3 rat
BENZYL ALCOHOL 15-40 Not available 1230 (oral, rat)
BISPHENOL A 1-5 Not available 80-05-7 4100 (oral, rat) Not available
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Liquid Boiling Point: Not established
Appearance and Odor: Amber liquid with amine odor Freezing Point: Not established
Density: 1.0 g/ml
Odor Threshold: Not established Water Solubility: Not established
Evaporation Rate: Not established PH: Alkaline
Vapor Density: Not applicable % volatility: 0
Vapor Pressure: < 0.1 at 20掳C Water/Oil Distribution: Oil Soluble
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Fastflor庐 CR
PRODUCT: PART B
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: None
Flammable upper limits (% vol.): Not established
If Yes, under what conditions: Liquid will maintain Flammable lower limits (% vol.): Not established
> 93.3oC (TCC)
combustion during a fire. Flash Point (method used):
Auto-ignition temperature: Not established
Dangerous Combustion Products: Carbon oxides
Extinguishing methods: Carbon Dioxide, water and nitrogen
fog, foam or dry oxides.
chemical.
Protect from mechanical impact: No
Special Methods: Fire-fighters should wear Protect from static discharge: No
full protective clothing
including self-contained
breathing apparatus
since toxic gases are
emitted. When heated in
fire, explosive gas
mixtures with air can
form. Cool fire-exposed
containers with water or
water fog.
SECTION V: REACTIVITY DATA
Chemical stability: Stable Dangerous decomposition products: Carbon oxides
If not, under what conditions. and nitrogen
oxides.
Polymerization Risks: No
Incompatibility with other material: Yes
If Yes, which ones Strong oxidizing
substances such
as organic
peroxides or
nitric acid.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Fastflor庐 CR
PRODUCT: PART B
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause eye irritations. Carcinogenicity: Not established
May cause severe burns.
May cause blindness. Toxic effects
on reproduction: Not established
Skin: May be irritating to the skin, may cause
severe burns, can be absorbed by skin. Teratogenicity: Not established
Contact may cause necrosis, dermatitis,
Mutagenicity: Not established
allergic reactions, and sensitization.
Inhalation: Vapors of this product may cause Product with synergistic
irritation. effects: Not established
Ingestion: May cause severe burns to the mouth,
throat and stomach. May cause vomiting,
dizziness, diarrhea, damages to the lungs
and death.
An over-exposure may cause breathing difficulty,
headaches, nausea, and damage to the lungs,
sensitization and dizziness.
May cause problems to the skin, eyes, and lungs. May
aggravate allergic and respiratory problems.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Fastflor庐 CR
PRODUCT: PART B
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Not necessary under normal use. Procedure in case
of leaks: Absorb with sand or other
Eyes: Full-face mask or safety glasses absorbent material.
Shoes: Leather Handling and Equipment
Methods: Avoid skin, eye and clothing
Clothing: Rubber apron contact.
Other: Eye wash station, shower Warehouse
Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Keep away from heat and open
flame.
Special Shipping
Instructions: See TDG class.
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Fastflor庐 CR
PRODUCT: PART B
SECTION VIII: FIRST AID
Skin: Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Throw out shoes that were dirtied on the inside.
Wash clothing before wearing again.
Consult a physician if required.
Eyes: Rinse eyes immediately with plenty of water keeping the eyelids open in order to
ensure a complete rinsing. This should last at least 10 minutes for maximum protection.
The rinsing of the eyes in less than 1 minute is essential for maximum protection.
Consult a physician immediately.
Inhalation: In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion: Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By: Steve Gosselin
Telephone #: (514) 697-2610
Fax #: (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
|