AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
Flortec庐 14
PRODUCT: REVISION DATE: March 18, 2008
USAGE: A CONCRETE CURING COMPOUND
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Paint related liquid WHMIS Classification: D2A, B2
UN NUMBER: 1263 Class: 3
Packaging Group: III
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
6700 (ppm)/
XYLENE 60-100 100 ppm 1330-20-7 4300 (oral, rat)
(oral, rat)
SECTION III: PHYSICAL CHARACTERISTICS
137 鈥? 143oC
Physical State: Liquid Boiling Point:
Appearance and Odor: Amber liquid with petroleum odor Freezing Point: Not Available
Density: 0.880 鈥? 0.910 g/ml
Odor Threshold: 0.2 鈥? 2 ppm (xylene) Water Solubility: Not established
Evaporation Rate: 0.59 (Butyl Acetate =1) pH: Not established
Vapor Density: 3.7 (Air = 1) % volatility: > 80
5 at (20oC)
Vapor Pressure: Water/Oil Distribution: Not established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 14
PRODUCT:
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: Yes. TDG Flammability Class: 3
Dangerous fire hazard Flammable upper limits (% vol.): 7.0
If Yes, under what conditions: Avoid sparks, flame or Flammable lower limits (% vol.): 1.0
static discharge. Flash Point (method used): 27掳C (TCC)
Auto-ignition temperature: Approx. 500掳C
Extinguishing methods: Carbon Dioxide, water Dangerous Combustion Products: Carbon oxides
fog, foam or dry
chemical. Protect from mechanical impact: No
Special Methods: Fire fighters should wear Protect from static discharge: Yes
full protective clothing
including self-contained
breathing apparatus
since toxic gases are
emitted. When heated in
fire, explosive gas
mixtures with air can
form. Cool fire-exposed
containers with water or
water fog.
SECTION V: REACTIVITY
Chemical stability: Yes, but avoid Dangerous decomposition products: Carbon oxides
temperatures
above 40掳C Polymerization Risks: No
If not, under what conditions:
Incompatibility with other material: Yes
If Yes, which ones: Strong oxidizing
substances such
as organic
peroxides or
nitric acid.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 14
PRODUCT:
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause eyes irritation. Carcinogenicity: No
Skin: May be irritating to the skin, may cause Toxic effects
dermatitis. May cause skimming and on reproduction: No
drying of the skin.
Teratogenicity: Xylene is classified as a
Inhalation: May irritate the lungs, may cause an development toxicant
allergic reaction, central nervous system (Embryo toxin)
depression. May cause headaches,
Mutagenicity: No
dizziness, and nausea. In rare cases, may
cause sensitization of the heart muscle
Product with synergistic
causing arrhythmia.
Effects: Not established.
Ingestion: May cause irritation to the gastro-
intestinal system.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems. An over exposure may cause death.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 14
PRODUCT:
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: NIOSH approved mask with Procedure in case
organic vapor cartridge. of leaks: Absorb with sand or other
absorbent material.
Eyes: Full face mask or safety glasses
Handling and Equipment
Shoes: Leather methods: Avoid skin, eye and clothing
contact
Clothing: Rubber Apron
Warehouse
Other: Shower Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 14
PRODUCT:
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for several minutes to ensure a proper
wash.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
Flortec庐 22
PRODUCT: REVISION DATE: March 18, 2008
USAGE: A CONCRETE CURING COMPOUND
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Paint related liquid WHMIS Classification : D2A, B2
UN NUMBER: 1263 Class: 3
Packaging Group: III
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
6700 (ppm)/
XYLENE 60-100 100 ppm 1330-20-7 4300 (oral, rat)
(oral, rat)
SECTION III: PHYSICAL CHARACTERISTICS
137 鈥? 143oC
Physical State: Liquid Boiling Point:
Appearance and Odor: Amber liquid with petroleum odor Freezing Point: Not Available
Density: 0.880 鈥? 0.910 g/ml
Odor Threshold: 0.2 鈥? 2 ppm (xylene) Water Solubility: Not established
Evaporation Rate: 0.59 (Butyl Acetate =1) pH: Not established
Vapor Density: 3,7 (Air = 1) % volatility: > 70
5 at (20oC)
Vapor Pressure: Water/Oil Distribution: Not established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 22
PRODUCT:
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: Yes. TDG Flammability Class: 3
Dangerous fire hazard Flammable upper limits (% vol.): 7.0
If Yes, under what conditions: Avoid sparks, flame or Flammable lower limits (% vol.): 1.0
static discharge. Flash Point (method used): 27掳C (TCC)
Auto-ignition temperature: Approx. 500掳C
Dangerous Combustion Products: Carbon oxides.
Extinguishing methods: Carbon Dioxide, water
fog, foam or dry Protect from mechanical impact: No
chemical.
Protect from static discharge: Yes
Special Methods: Fire-fighters should wear
full protective clothing
including self-contained
breathing apparatus
since toxic gases are
emitted. When heated in
fire, explosive gas
mixtures with air can
form. Cool fire-exposed
containers with water or
water fog.
SECTION V: REACTIVITY
Chemical stability: Yes, but avoid Dangerous decomposition products: Carbon oxides
temperatures
above 40掳C Polymerization Risks: No
If not, under what conditions:
Incompatibility with other material: Yes
If Yes, which ones: Strong oxidizing
substances such
as organic
peroxides or
nitric acid.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 22
PRODUCT:
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause eyes irritation. Carcinogenicity: No
Skin: May be irritating to the skin, may cause Toxic effects
dermatitis. May cause skimming and on reproduction: No
drying of the skin.
Teratogenicity: Xylene is classified as a
Inhalation: May irritate the lungs, may cause an development toxicant
allergic reaction, central nervous system (Embryo toxin)
depression. May cause headaches,
Mutagenicity: No
dizziness, and nausea. In rare cases, may
cause sensitization of the heart muscle
Product with synergistic
causing arrhythmia.
Effects: Not established.
Ingestion: May cause irritation to the gastro-
intestinal system.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems. An over exposure may cause death.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 22
PRODUCT:
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: NIOSH approved mask with Procedure in case
organic vapor cartridge. of leaks: Absorb with sand or other
absorbent material.
Eyes: Full face mask or safety glasses
Handling and Equipment
Shoes: Leather methods: Avoid skin, eye and clothing
contact
Clothing: Rubber Apron
Warehouse
Other: Shower Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 22
PRODUCT:
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for at least 15 minutes to ensure
a proper wash.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
Flortec庐 28
PRODUCT: REVISION DATE: March 18, 2008
USAGE: A CONCRETE CURING COMPOUND
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Paint related liquid WHMIS Classification: D2A, B2
UN NUMBER: 1263 Class: 3
Packaging Group: III
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
6700 (ppm)/
XYLENE 60-100 100 ppm 1330-20-7 4300 (oral, rat)
(oral, rat)
SECTION III: PHYSICAL CHARACTERISTICS
137 - 143oC
Physical State: Liquid Boiling Point:
Appearance and Odor: Amber liquid with petroleum odor Freezing Point: Not Available
Density: 0.880 鈥? 0.910 g/ml
Odor Threshold: 0.2 鈥? 2 ppm (xylene) Water Solubility: Not established
Evaporation Rate: 0.59 (Butyl Acetate = 1) pH: Not established
Vapor Density: 3.7 (Air = 1) % volatility: > 65
5 at (20oC)
Vapor Pressure: Water/Oil Distribution: Not established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 28
PRODUCT:
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: Yes. TDG Flammability Class: 3
Dangerous fire hazard Flammable upper limits (% vol.): 7.0
Flammable lower limits (% vol.): 1.0
If Yes, under what conditions: Avoid sparks, flame or Flash Point (method used): 27掳C (TCC)
static discharge. Auto-ignition temperature: Approx. 500掳C
Dangerous Combustion Products: Carbon oxides.
Extinguishing methods: Carbon Dioxide, water Protect from mechanical impact : No
fog, foam or dry
chemical. Protect from static discharge: Yes
Special Methods: Fire fighters should wear
full protective clothing
including self-contained
breathing apparatus
since toxic gases are
emitted. When heated in
fire, explosive gas
mixtures with air can
form. Cool fire-exposed
containers with water or
water fog.
SECTION V: REACTIVITY
Chemical stability: Yes, but avoid Dangerous decomposition products: Carbon oxides.
temperatures
above 40掳C Polymerization Risks: No
If not, under what conditions:
Incompatibility with other material: Yes
If Yes, which ones: Strong oxidizing
substances such
as organic
peroxides or
nitric acid.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 28
PRODUCT:
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause eyes irritation. Carcinogenicity: No
Skin: May be irritating to the skin, may cause Toxic effects
dermatitis. May cause skimming and on reproduction: No
drying of the skin.
Teratogenicity: Xylene is classified as a
Inhalation: May irritate the lungs, may cause an development toxicant
allergic reaction, central nervous system (Embryo toxin)
depression. May cause headaches,
Mutagenicity: No
dizziness, and nausea. In rare cases, may
cause sensitization of the heart muscle
Product with synergistic
causing arrhythmia.
effects: Not established.
Ingestion: May cause irritation to the gastro-
intestinal system.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems. An over exposure may cause death.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 28
PRODUCT:
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: NIOSH approved mask with Procedure in case
organic vapor cartridge. of leaks: Absorb with sand or other
absorbent material.
Eyes: Full face mask or safety glasses
Handling and Equipment
Shoes: Leather methods: Avoid skin, eye and clothing
contact
Clothing: Rubber Apron
Warehouse
Other: Shower Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
App S.G.
Flortec庐 28
PRODUCT:
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for at least 15 minutes to ensure
a proper wash.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
|