AQ191A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
SECTION I: PRODUCT INFORMATION
Sika速 AnchorFix速-3CA
PRODUCT: PART A REVISION DATE: February 15, 2007
USAGE: HIGH-MODULUS, HIGH-STRENGTH, STRUCTURAL, NON-ABRASIVE, EPOXY ADHESIVE
ANCHORING GEL
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not regulated WHMIS Classification: D2B
UN NUMBER: Not regulated Class: Not regulated
Packaging Group: Not regulated
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
EPOXY RESIN 60-100 Not Available > 5000 (oral, rat) Not Available
25068-38-6
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Paste Boiling Point: Not Established
Appearance and Odor: White paste, ether odor Freezing Point: Not Established
Density: 1.2 g/ml
Odor Threshold: Not Established Solubility in water: Not Established
Evaporation Rate: Not Established pH: Not Established
Vapor Density: Not Established % volatile: Not Applicable
Vapor Pressure: Not Established Coefficient water/oil: Not Established
AQ191A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-3CA
PRODUCT: PART A
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not Regulated
If Yes, under what conditions: Flammable upper limits (% vol.): Not Established
Flammable lower limits (% vol.): Not Established
Flash Point (method used): > 96属C (TCC)
Extinguishing methods: Foam, dry chemical Auto-ignition temperature: Not Established
products, CO2, water Dangerous Combustion Products: Carbon oxides
hose.
Protect from mechanical impact: No
Special Methods: Fire fighters must wear Protect from static discharge: No
usual protective clothing
and respiratory
equipment. A water
hose may be used to
cool the containers and
dissipate the vapors.
SECTION V: REACTIVITY DATA
Chemical stability: Yes Dangerous decomposition products: Carbon oxides
If not, under what conditions: Excessive heat Polymerization Risks: May polymerize
will degrade at high
epoxy resin temperatures.
Incompatibility with other material: Yes
If Yes, which ones: Strong
oxidizers,
Strong Bases
AQ191A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-3CA
PRODUCT: PART A
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause irritation. Carcinogenicity: No
Skin: May cause irritation, sensitization Toxic effects
on reproduction: No
Inhalation: Vapor or mist may cause irritation,
allergic reaction. Teratogenicity: No
Ingestion: May cause irritation, sensitization of the Mutagenicity: No
gastro-intestinal system
Product with synergistic
Effect: Not established
Chronic or acute exposure will increase the problems mentioned in this section.
AQ191A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-3CA
PRODUCT: PART A
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Not necessary under normal use. Procedure in case
of leaks: Absorb with sand or other
Eyes: Full face mask or safety glasses absorbent material.
Shoes: Leather Handling and Equipment
methods: Avoid skin, eye and clothing
Clothing: Rubber Apron contact
Other: No Warehouse
Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse
water according to municipal,
provincial or federal laws for
disposal of chemicals.
AQ191A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-3CA
PRODUCT: PART A
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of water.
Discard shoes with interior contamination.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for several minutes, while holding
eyelids wide open, to ensure a proper wash.
The eye rinse within the first minute is essential to ensure maximum
protection.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other
material, product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to
be reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the
product's current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site
and/or telephone number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
Sika速 AnchorFix速-3CA
PRODUCT: PART B REVISION DATE: February 15, 2007
USAGE: HIGH-MODULUS, HIGH-STRENGTH, STRUCTURAL, NON-ABRASIVE, SMOOTH-
EPOXY GEL ADHESIVE
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Amines, Liquid, Corrosive, N.O.S. (Amine Blends)
UN NUMBER: 2735 WHMIS Classification : D2B, E
Packaging Group: III Class: 8
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
40-60 111-41-7
AMINE BLEND Not Available Not Available Not Available
Not Available 143-23-7 Not Available Not Available
Not Available. 140-31-8 Not Available Not Available
Not Available 694-83-7 Not Available Not Available
2,4,6-Tri(dimethyla- 1-5 Not Available 90-72-2 Not Available Not Available
minomethyl) phenol
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Paste Boiling Point: Not Established
Appearance and Odor: Grey Paste with amine odor Freezing Point: Not Established
Density: 1.5 g/ml
Odor Threshold: Not Established Solubility in water: Insoluble
Evaporation Rate: Not Established pH: Not Established
Vapor Density: Not Established % volatile: Not Established
Vapor Pressure: Not Established Coefficient water/oil: Not Established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
Sika速 AnchorFix速-3CA
PRODUCT: PART B
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not Regulated
If Yes, under what conditions: Flammable upper limits (% vol.): Not Established
Flammable lower limits (% vol.): Not Established
Flash Point (method used): > 96属C (TCC)
Extinguishing methods: Foam, CO2, water fog. Auto-ignition temperature: Not Established
Dangerous Combustion Products: Carbon oxides,
nitrogen oxides
Special Methods: Fire fighters must wear
usual protective clothing Protect from mechanical impact: No
and respiratory
equipment. A water hose Protect from static discharge: No
may be used to cool the
containers and dissipate
the vapors.
SECTION V: REACTIVITY DATA
Chemical stability: Yes Dangerous decomposition products: Carbon oxides,
nitrogen oxides
If not, under what conditions:
Polymerization Risks: No
Incompatibility with other material: Yes
If Yes, which ones: Strong oxidizers,
Strong Bases
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
Sika速 AnchorFix速-3CA
PRODUCT: PART B
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause irritation, sensitization. Carcinogenicity: No
Skin: May cause irritation, sensitization. Toxic effects
on reproduction: No
Inhalation: May cause irritation, sensitization.
Teratogenicity: No
Ingestion May cause irritation, sensitization.
Mutagenicity: No
Overexposure may cause breathing difficulties, Product with synergistic
sensitization, headaches, nausea, vomiting, lung damage, effect.: No
fainting, and ulcers.
May aggravate respiratory, skin, eye, lung problems and
allergies.
Chronic or acute exposure will increase the problems mentioned in this section.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
Sika速 AnchorFix速-3CA
PRODUCT: PART B
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Not necessary under normal use. Procedure in case
NIOSH/MSHA approved mask for of leaks: Absorb with sand or other
organic vapor if the ventilation is absorbent material.
inadequate
Handling and Equipment
Eyes: Full face mask or safety glasses methods: Avoid skin, eye and clothing
contact
Shoes: Leather
Warehouse
Clothing: Rubber Apron Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Other: Eye wash station and shower. Keep away from heat and open
flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
Sika速 AnchorFix速-3CA
PRODUCT: PART B
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Discard shoes with interior contamination.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for at least 15 minutes, while holding
eyelids wide open, to ensure a proper wash.
The eye rinse within the first minute is essential to ensure maximum protection.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
SECTION I: PRODUCT INFORMATION
Sika速 AnchorFix速-4CA
PRODUCT: PART A REVISION DATE: February 15, 2007
USAGE: HIGH-MODULUS, HIGH-STRENGTH, STRUCTURAL, NON-ABRASIVE,
SMOOTH-EPOXY GEL ADHESIVE
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
(514) 697-2610
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not regulated WHMIS Classification: D2B
UN NUMBER: Not regulated Class: Not regulated
Packaging Group: Not regulated
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
EPOXY RESIN 60-100 Not Available > 5000 (oral, rat) Not Available
25068-38-6
ZINC OXIDE 1-5 Not Available 1314-13-2 Not Available Not Available
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Paste Boiling Point: Not Established
Appearance and Odor: White paste, ether odor Freezing Point: Not Established
Density: 1.47 g/ml
Odor Threshold: Not Established Solubility in water: Not Established
Evaporation Rate: Not Established pH: Not Established
Vapor Density: Not Established % volatile: Not Established
Vapor Pressure: Not Established Coefficient water/oil: Not Established
AQ191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-4CA
PRODUCT: PART A
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not Regulated
If Yes, under what conditions: Flammable upper limits (% vol.): Not Established
Flammable lower limits (% vol.): Not Established
Flash Point (method used): > 96属C (TCC)
Extinguishing methods: Foam, dry chemical Auto-ignition temperature: Not Established
products, CO2, water Dangerous Combustion Products: Carbon oxides
hose.
Protect from mechanical impact: No
Special Methods: Fire fighters must wear Protect from static discharge: No
usual protective clothing
and respiratory
equipment. A water
hose may be used to
cool the containers and
dissipate the vapors.
SECTION V: REACTIVITY DATA
Chemical stability: Yes Dangerous decomposition products: Carbon oxides
If not, under what conditions: Excessive heat
will degrade
epoxy resin Polymerization Risks: May polymerize at
high temperatures
Incompatibility with other material: Yes
If Yes, which ones: Strong
oxidizers, strong
bases, and
strong acids.
AQ191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-4CA
PRODUCT: PART A
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause irritation, sensitization. Carcinogenicity: No
Skin: May cause irritation, sensitization,
allergic reaction. Toxic effects
on reproduction: No
Inhalation: Vapor or mist may cause irritation.
May cause allergic reaction. Teratogenicity: No
Ingestion: May cause irritation of the gastro-
intestinal system. Mutagenicity: No
Product with synergistic
Overexposure may cause breathing difficulties, effect.: Not established
sensitization, headaches, nausea, vomiting, lung
damage, fainting, and ulcers.
May aggravate respiratory, skin, eye, lung problems and
allergies.
Chronic or acute exposure will increase the problems mentioned in this section.
AQ191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-4CA
PRODUCT: PART A
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Not necessary under normal use. Procedure in case
of leak: Absorb with sand or other
Eyes: Full face mask or safety glasses absorbent material. Resin residue
may be removed with steam or
Shoes: Leather hot water and soap. All
precautions should be taken when
Clothing: Rubber Apron cleaning the spill with solvent.
Other: No Handling and Equipment
methods: Avoid skin, eye and clothing
contact
Warehouse
Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-4CA
PRODUCT: PART A
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of water.
Discard shoes with interior contamination.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for several minutes, while holding eyelids
wide open, to ensure a proper wash.
The eye rinse within the first minute is essential to ensure maximum protection.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
Sika速 AnchorFix速-4CA
PRODUCT: PART B REVISION DATE: February 15, 2007
USAGE: HIGH-MODULUS, HIGH-STRENGTH, STRUCTURAL, NON-ABRASIVE, SMOOTH-EPOXY
GEL ADHESIVE
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
(514) 697-2610
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Amines, Liquid, Corrosive, N.O.S. WHMIS Classification: D2B, E
UN NUMBER: 2735 Class: 8
Packaging Group: III
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
40-60 15520-10-2
AMINE BLEND Not Available Not Available Not Available
Not Available 1477-55-0 Not Available Not Available
Not Available. 6864-37-5 Not Available Not Available
Not Available 100-51-6 Not Available Not Available
2,4,6-Tri(dimethyla- 1-5 Not Available 90-72-2 Not Available Not Available
minomethyl) phenol
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Paste Boiling Point: Not Established
Appearance and Odor: Grey paste with amine odor Freezing Point: Not Established
Odor Threshold: Not Established Density: 1.5 g/ml
Evaporation Rate: Not Established Solubility in water: Insoluble
Vapor Density: Not Established pH: Not Established
% volatile: Not Established
Vapor Pressure: Not Established
Coefficient water/oil: Not Established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
Sika速 AnchorFix速-4CA
PRODUCT: PART B
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not Regulated
If Yes, under what conditions: Flammable upper limits (% vol.): Not Established
Flammable lower limits (% vol.): Not Established
Flash Point (method used): > 96属C (TCC)
Extinguishing methods: Foam, CO2, water fog. Auto-ignition temperature: Not Established
Dangerous Combustion Products: Carbon and
nitrogen oxides.
Special Methods: Fire fighters must wear
usual protective clothing Protect from mechanical impact: No
and respiratory
equipment. A water hose Protect from static discharge: No
may be used to cool the
containers and dissipate
the vapors.
SECTION V: REACTIVITY DATA
Chemical stability: Yes
Dangerous decomposition products: Carbon and
nitrogen oxides.
If not, under what conditions:
Polymerization Risks: No
Incompatibility with other material: Yes
If Yes, which ones: Strong oxidizers,
strong bases
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
Sika速 AnchorFix速-4CA
PRODUCT: PART B
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause irritation, sensitization. Carcinogenicity: No
Skin: May cause irritation, sensitization. Toxic effects
on reproduction: No
Inhalation: Vapor or mist may cause irritation,
sensitization. Teratogenicity: No
Ingestion: May cause irritation or a sensitization of Mutagenicity: No
the gastro-intestinal system.
Product with synergistic
effect.: No
Overexposure may cause breathing difficulties,
sensitization, headaches, nausea, vomiting, lung damage,
fainting, and ulcers.
May aggravate respiratory, skin, eye, lung problems and
allergies.
Chronic or acute exposure will increase the problems mentioned in this section.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
Sika速 AnchorFix速-4CA
PRODUCT: PART B
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Not necessary under normal use. Procedure in case
NIOSH/MSHA approved mask for of leaks: Absorb with sand or other
organic vapor if the ventilation is absorbent material.
inadequate
Handling and Equipment
Eyes: Full face mask or safety glasses methods: Avoid skin, eye and clothing
contact
Shoes: Leather
Warehouse
Clothing: Rubber Apron Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Other: Eye wash station, shower Keep away from heat and open
flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
Sika速 AnchorFix速-4CA
PRODUCT: PART B
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Discard shoes with interior contamination.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for at least 15 minutes, while
holding eyelids wide open, to ensure a proper wash.
The eye rinse within the first minute is essential to ensure maximum
protection.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
|