AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
SikaBond庐T-2
PRODUCT: REVISION DATE: February 20, 2007
USAGE: ONE COMPONENT URETHANE BASED ADHESIVE / SEALANT
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not Regulated WHMIS Classification: D2A, B3
UN NUMBER: Not Established Class: Not Applicable
Packaging Group: Not Applicable
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 LC50
(species, route) (species, route)
CALCIUM OXIDE 1-5 Not Available 1305-78-8 Not Available Not Available
XYLENE 1-5 100 ppm 1330-20-7 4300 (oral, rat) 6350 ppm/4h
POLYOL AND
ISOCYANATE 30-60 Not Established Not Available Not Established Not Established
PREPOLYMER
AROMATIC BLEND 1-5 Not Available 64742-88-7 Not Available Not Available
AMORPHOUS SILICA 1-5 Not Available 7631-86-9 Not Available Not Available
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Paste Boiling Point: Not Established
Appearance and Odor: Aromatic odor white paste Freezing Point: Not Established
Density: 1.2 g/ml
Odor Threshold: Not Established Water Solubility: Not Established
Evaporation Rate: Not Established pH: Not Established
Vapor Density: Not Established % volatile: <7
Vapor Tension: Not Established Water/Oil Distribution: Not Established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaBond庐T-2
PRODUCT:
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: Combustible TDG flammability Class: Not Regulated
If Yes, under what conditions: Flame, spark Flammable upper limits (% vol.): Not Established
Flammable lower limits (% vol.): Not Established
Extinguishing methods: Foam, dry chemical Flash Point (method used): > 80掳C (TCC)
products, CO2, water for Auto-ignition temperature: Not Established
large flames. Dangerous Combustion Products: Carbon oxides,
Aldehydes
Special Methods: Firefighters must wear Ketones, HCL,
complete protective Nitrogen Oxide,
clothing with respiratory IPDI, MDI
equipment and they must
protect any exposed skin.
Heated isocyanates react Protect from mechanical impact: No
strongly with water.
Protect from static discharge: No
SECTION V: REACTIVITY DATA
Chemical stability: Yes Dangerous decomposition products: Carbon oxides,
Aldehydes
If not, under what conditions Ketones, HCL,
Nitrogen Oxide,
IPDI, MDI
Incompatibility with other material: Yes
If Yes, which ones: Acid, strong Polymerization Risks: No
oxidizer, amine.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaBond庐T-2
PRODUCT:
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: Irritating Carcinogenicity: No
Skin: Irritating Toxic effects
Contact may result in dermatitis, on reproduction: No
allergic reactions, and
sensitization.
Teratogenicity: Xylene is classified as a
development toxicant
Inhalation: Vapor or mist from this product (Embryotoxin)
may cause irritation.
Mutagenicity: No
Ingestion: May cause nausea, vomiting,
fainting, diarrhea, lung damage,
G.I. system disorder, Product with synergistic
effects: Not Established
constipation, ulcers.
Over exposure may cause breathing difficulties,
sensitization, headaches, nausea, vomiting. May
aggravate respiratory, skin, eye, lung problems and
allergies. If the product is applied according to the
manufacturer, none of these symptoms should be
encountered. A person who is allergic to isocyanate may
have a reaction with a level of isocyanate well below the
T.L.V. Xylene is a central nervous system depressor and
in rare cases, may cause a sensitization of the heart
muscle causing arrhythmia.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems. An over exposure may cause death.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaBond庐T-2
PRODUCT:
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Use chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Not necessary under normal use. Procedure in case
of leaks: Absorb with sand or other
Eyes: Full-face mask or safety glasses absorbent material.
Shoes: Handling and Equipment
methods: Avoid skin, eye and clothing
Clothing: Rubber Apron contact
Other: Eye wash station, shower Warehouse
Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaBond庐T-2
PRODUCT:
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of water.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for several minutes, while holding eyelids
wide open, to ensure a proper wash.
See a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By: Steve Gosselin
Telephone #: (514) 697-2610
Fax #: (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
|