AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
Appr: S.G.
SECTION I: PRODUCT INFORMATION
SikaBond庐-T54
PRODUCT: REVISION DATE: March 26, 2007
USAGE: ONE COMPONENT URETHANE BASED ADHESIVE / SEALANT
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not Regulated WHMIS Classification: D2A, B3
UN NUMBER: Not Established Class: Not Applicable
Packaging Group: Not Applicable
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 LC50
(species, route) (species, route)
POLYOL AND
ISOCYANATE 30-60 Not Established Not Available Not Established Not Established
PREPOLYMER
METHYLENE
BIS PHENYL 0.1-1.0 ACGIH 0.005 ppm 101-68-8 Not Available Not Available
ISOCYANATE
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Paste Boiling Point: Not Established
Appearance and Odor: Aromatic odor, colored paste Freezing Point: Not Established
Density: 1.3 g/ml
Odor Threshold: Not Established Water Solubility: Not Established
Evaporation Rate: Not Established pH: Not Established
Vapor Density: Not Established % volatile: <5
Vapor Pressure: Not Established Water/Oil Distribution: Not Established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
Appr: S.G.
SikaBond庐-T54
PRODUCT:
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: Combustible TDG Flammability Class: Not Regulated
If Yes, under what conditions: Flame, spark Flammable upper limits (% vol.): Not Established
Flammable lower limits (% vol.): Not Established
Extinguishing methods: Foam, dry chemical Flash Point (method used): > 80掳C (TCC)
products, CO2, water for Auto-ignition temperature: Not Established
large flames. Dangerous Combustion Products: Carbon oxides,
Nitrogen oxide.
Special Methods: Fire fighters must wear
complete protective
clothing with respiratory Protect from mechanical impact: No
equipment and they must
Protect from static discharge: No
protect any exposed skin.
Heated isocyanates react
strongly with water.
SECTION V: REACTIVITY DATA
Chemical stability: Yes Dangerous decomposition products: Carbon oxides,
If not, under what conditions Nitrogen oxide
Incompatibility with other material: Yes
If Yes, which ones: Acid, strong Polymerization Risks: No
oxidizer, amine.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
Appr: S.G.
SikaBond庐-T54
PRODUCT:
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: Irritating Carcinogenicity: Methylene Biphenyl
Isocyanate is listed by the
IARC.
Skin: Irritating
Contact may result in dermatitis, allergic
reactions, and sensitization. Toxic effects
on reproduction: No
Inhalation: Vapor or mist from this product may
cause irritation. Teratogenicity: Xylene is classified as a
development toxicant
(Embryo toxin)
Ingestion: May cause nausea, vomiting, fainting,
diarrhea, lung damage, gastro-intestinal
system disorder, constipation, ulcers. Mutagenicity: No
Over exposure may cause breathing difficulties, Product with synergistic
sensitization, headaches, nausea, vomiting. May effects: Not Established
aggravate respiratory, skin, eye, lung problems and
allergies.
If the product is applied according to the manufacturer,
none of these symptoms should be encountered.
A person who is allergic to isocyanate may have a
reaction with a level of isocyanate well below the T.L.V.
Xylene is a central nervous system depressor and in rare
cases, may cause a sensitization of the heart muscle
causing arrhythmia.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems. An over exposure may cause death.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
Appr: S.G.
SikaBond庐-T54
PRODUCT:
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Use chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Use a NIOSH approved Procedure in case
Respirator if the TLV limit is of leaks: Absorb with sand or other
exceeded. absorbent material.
Eyes: Full face mask or safety glasses Handling and Equipment
methods: Avoid skin, eye and clothing
Shoes: Leather contact
Clothing: Rubber Apron Warehouse
Requirements: Keep all containers closed in a
Other: Eye wash station, shower cool, dry and well ventilated area.
Keep away from heat and open
flame.
Special Shipping
Instructions: See TDG class
Waste Disposal Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemical.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
Appr: S.G.
SikaBond庐-T54
PRODUCT:
SECTION VIII: FIRST AID
Skin: Remove contaminated clothing and shoes.
Wash immediately with plenty of water.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes: Rinse eyes immediately with plenty of water for several minutes, while
holding eyelids wide, to ensure a proper wash.
See a physician immediately.
Inhalation: In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion: Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician if necessary.
SECTION IX: PREPARATION INFORMATION
Prepared by : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
|