AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
Appr: S.G.
SECTION I: PRODUCT INFORMATION
SikaBond庐 Construction Adhesive
PRODUCT: REVISION DATE: November 13, 2007
Formerly Sikaflex庐 11FC
USAGE: ONE COMPONENT URETHANE BASED SEALANT / ADHESIVE
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not Regulated WHMIS Classification: D2A, B3, D2B
UN NUMBER: Not Established Class: Not Applicable
Packaging Group: Not Applicable
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 LC50
(species, route) (species, route)
CALCIUM OXIDE 1-5 Not Available 1305-78-8 Not Available Not Available
XYLENE 5-10 100 ppm 1330-20-7 4300 (oral, rat) 6350 ppm/4h
POLYOL AND
ISOCYANATE 15-40 Not Established Not Available Not Established Not Established
PREPOLYMER
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Paste Boiling Point: Not Established
Appearance and Odor: Aromatic odor grey paste Freezing Point: Not Established
Density: 1.2 g/ml
Odor Threshold: Not Established Water Solubility: Not Established
Evaporation Rate: Not Established pH: Not Established
Vapor Density: Not Established % volatile: < 10
Vapor Tension: Not Established Water/Oil Distribution: Not Established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
Appr: S.G.
SikaBond庐 Construction Adhesive / Formerly Sikaflex庐 11 FC
PRODUCT:
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: Combustible TDG flammability Class: Not Regulated
If Yes, under what conditions: Flame, spark Flammable upper limits (% vol.): Not Established
Flammable lower limits (% vol.): Not Established
Extinguishing methods: Foam, dry chemical Flash Point (method used): > 80掳C (TCC)
products, CO2, water for Auto-ignition temperature: Not Established
large flames. Dangerous Combustion Products: Carbon oxides,
Aldehydes
Special Methods: Firefighters must wear Ketones, HCL,
complete protective Nitrogen Oxide,
clothing with respiratory TDI, MDI.
equipment and they must
protect any exposed skin.
Heated isocyanates react Protect from mechanical impact: No
strongly with water.
Protect from static discharge: No
SECTION V: REACTIVITY DATA
Chemical stability: Yes Dangerous decomposition products: Carbon oxides,
If not, under what conditions Aldehydes
Ketones, HCL,
Nitrogen Oxide,
TDI, MDI.
Incompatibility with other material: Yes Polymerization Risks: No
If Yes, which ones: Acid, strong
oxidizer, amine.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
Appr: S.G.
SikaBond庐 Construction Adhesive / Formerly Sikaflex庐 11 FC
PRODUCT:
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: Irritating Carcinogenicity: No
Skin: Irritating Toxic effects
Contact may result in dermatitis, on reproduction: No
allergic reactions, and
sensitization.
Teratogenicity: Xylene is classified as a
development toxicant
Inhalation: Vapor or mist from this product (Embryotoxin)
may cause irritation.
Mutagenicity: No
Ingestion: May cause nausea, vomiting,
diarrhea, G.I. system disorder and
constipation. Product with synergistic
effects: Not Established
Over exposure may cause breathing difficulties,
sensitization, headaches, nausea, vomiting. May
aggravate respiratory, skin, eye, lung problems and
allergies.
If the product is applied according to the manufacturer,
none of these symptoms should be encountered.
A person who is allergic to isocyanate may have a
reaction with a level of isocyanate well below the T.L.V.
Xylene is a central nervous system depressor and in rare
cases, may cause a sensitization of the heart muscle
causing arrhythmia.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems. An over exposure may cause death.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
Appr: S.G.
SikaBond庐 Construction Adhesive / Formerly Sikaflex庐 11 FC
PRODUCT:
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Ventilation: Sufficient ventilation required
Gloves: Use chemical resistant gloves.
Procedure in case
Respiratory equipment: Not necessary under normal use. of leaks: Absorb with sand or other
absorbent material.
Eyes: Full face mask or safety glasses
Handling and Equipment
Shoes: Leather methods: Avoid skin, eye and clothing
contact
Clothing: Rubber Apron
Warehouse
Other: Eye wash station, shower Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Keep away from heat and open
flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemical.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date: 99/09/30
Appr: S.G.
SikaBond庐 Construction Adhesive / Formerly Sikaflex庐 11 FC
PRODUCT:
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of water.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for several minutes, while holding eyelids
wide open, to ensure a proper wash.
See a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared by : Steve Gosselin
Telephone # : (514) 697-2610
.Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
|