AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
SikaFix庐 PU
PRODUCT: PART A REVISION DATE: February 21, 2007
USAGE: INDUSTRIAL COATING
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not regulated WHMIS Classification: D2B, B3
UN NUMBER: Not applicable Class: Not applicable
Packaging Group: Not applicable
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 LC50
(species, route) (species, route)
POLYETHER
60 - 100 NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE
POLYOL
POLYSILOXANE 5 - 10 NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE
TERTIARY AMINE 0.5 - 1.5 NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Liquid Boiling Point: Not available
Appearance and Odor: Light straw, mild Freezing Point: Not available
Density: 1.02 g/ml
Odor Threshold: Not available Water Solubility: Moderate
Evaporation Rate: Not available pH: Not available
Vapor Density: Not available % volatility by volume: 0
Vapor Pressure: Not available Water/Oil Distribution: Not available
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU
PRODUCT: PART A
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not applicable
Flammable upper limits (% vol.): Not applicable
If Yes, under what conditions: Flammable lower limits (% vol.): Not applicable
Flash Point (setaflash closed cup): 86掳C
Auto-ignition temperature: Not applicable
Extinguishing methods: Water fog, CO2, dry Dangerous Combustion Products Carbon oxides,
chemical, foam nitrogen oxides
Special Methods: Fire-fighters must wear Protect from mechanical impact: No
complete protective
clothing with respiratory Protect from static discharge: No
equipment
SECTION V: REACTIVITY DATA
Chemical stability: Stable Dangerous decomposition products: Carbon oxides,
nitrogen oxides
If not, under what conditions:
Polymerization Risks: No
Incompatibility with other material: Not known
If Yes, which ones:
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU
PRODUCT: PART A
SECTION VI: TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: Will result in eye irritation Carcinogenicity No
Skin: Will result in skin irritation Toxic effects
on reproduction: Not applicable
Inhalation: Will result in respiratory tract irritation
Teratogenicity: Not applicable
Ingestion: May cause abdominal pain, vomiting
and diarrhea Mutagenicity: Not applicable
Product with synergistic
Effects: None known
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU
PRODUCT: PART A
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Impervious gloves Ventilation: Use adequate ventilation
Respiratory equipment: If respiratory respiration is Procedure in case
required, use an approved air of leaks: Remove all sources of ignition
purifying respirator (flames, sparks, etc.). Provide
adequate ventilation. Avoid
Eyes: Chemical goggles and full face prolonged breathing of vapors.
shield Remove to a container or absorb
with clay, diatomaceous earth or
Shoes: Security shoes other suitable inert absorbent.
Clothing: Long sleeved, body covering and Handling and
protective clothing Equipment methods: Avoid inhalation, skin and eye
contact. Wash repeatedly with
Other: soap and water during the
workday.
Warehouse
Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Special Shipping
Instructions: See TDG class.
Waste Disposal: Dispose of residues according to
municipal, provincial or federal
laws for disposal of chemicals.
Do not incinerate closed
containers.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU
PRODUCT: PART A
SECTION VIII: FIRST AID
Skin: Wash thoroughly with soap and water.
If irritation persists, consult a physician
Eyes: Rinse eyes immediately with plenty of water for at least 15 minutes.
See a physician immediately.
Inhalation: Remove the affected person to fresh air.
If breathing is difficult, administer oxygen.
Consult a physician if required.
Ingestion: Do not induce vomiting, administer large amounts of water or milk if available.
Transport immediately to a medical facility.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
SikaFix庐 PU
PRODUCT: PART B REVISION DATE: February 21, 2007
USAGE: INDUSTRIAL COATING
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Isocyanate solution N.O.S. WHMIS Classification: D2A, D1B
UN NUMBER: 2206 Class: 6.1
Packaging Group: II
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 LC50
(species, route) (species, route)
4,4- ACGIH TWA 15800mg/kg
DIPHENYLMETHANE 40 - 70 101-68-8 NOT AVAILABLE
5 ppm (rat, oral)
DIISOCYANATE
OLIGOMERS OF MDI 30-60 NOT AVAILABLE 9016-87-9 NOT AVAILABLE NOT AVAILABLE
IPHENYLMETHANE
3-7 NOT AVAILABLE 26447-40-5 NOT AVAILABLE NOT AVAILABLE
DIISOCYANATE
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Liquid Boiling Point: 208潞C
Appearance and Odor: Brown, mild Freezing Point: Not available
Density: 1.24 g/ml
Odor Threshold: Not available Water Solubility: Slight
Evaporation Rate: Not available pH: Not available
Vapor Density: 8.50 % volatility by volume: 0
Vapor Pressure: Not available Water/Oil Distribution: Not available
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU
PRODUCT: PART B
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not applicable
Flammable upper limits (% vol.): Not applicable
If Yes, under what conditions: Flammable lower limits (% vol.): Not applicable
Flash Point (setaflash closed cup): 225掳C
Auto-ignition temperature: Not applicable
Extinguishing methods: Water fog, CO2, dry Dangerous Combustion Products Carbon oxides,
chemical, foam nitrogen oxides
Special Methods: Fire-fighters must wear Protect from mechanical impact: No
complete protective
clothing with respiratory Protect from static discharge: No
equipment
SECTION V: REACTIVITY DATA
Chemical stability: Stable Dangerous decomposition products: Carbon oxides,
nitrogen oxides
If not, under what conditions:
Polymerization Risks: May occur
Incompatibility with other material: Yes
If Yes, which ones: Water, moisture
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU
PRODUCT: PART B
SECTION VI: TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: Will result in eye irritation Carcinogenicity No
Skin: Will result in skin irritation Toxic effects
on reproduction: Not applicable
Inhalation: High vapor concentration may produce
nausea, vomiting, headaches, dizziness, Teratogenicity: Not applicable
unconsciousness and asphyxia resulting
in central nervous system effects
Mutagenicity: Not applicable
Ingestion: May cause abdominal pain, vomiting
and diarrhea Product with synergistic
Effects: None known
This product may cause skin and respiratory sensitization.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU
PRODUCT: PART B
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Impervious gloves Ventilation: Use adequate ventilation
Respiratory equipment: If respiratory respiration is Procedure in case
required, use an approved air of leaks: Remove all sources of ignition
purifying respirator (flames, sparks, etc.). Provide
adequate ventilation. Avoid
Eyes: Chemical goggles and full face prolonged breathing of vapors.
shield Remove to a container or absorb
with clay, diatomaceous earth or
Shoes: Security shoes other suitable inert absorbent.
Clothing: Long sleeved, body covering and Handling and
protective clothing Equipment methods: Avoid inhalation, skin and eye
contact. Wash repeatedly with
Other: soap and water during the
workday.
Warehouse
Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Special Shipping
Instructions: See TDG class.
Waste Disposal: Dispose of residues according to
municipal, provincial or federal
laws for disposal of chemicals.
Do not incinerate closed
containers.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU
PRODUCT: PART B
SECTION VIII: FIRST AID
Skin: Wash thoroughly with soap and water.
If irritation persists, consult a physician
Eyes: Rinse eyes immediately with plenty of water for at least 15 minutes.
See a physician immediately.
Inhalation: Remove the affected person to fresh air.
If breathing is difficult, administer oxygen.
Consult a physician if required.
Ingestion: Do not induce vomiting, administer large amounts of water or milk if available.
Transport immediately to a medical facility.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
SikaFix庐 PU Accelerator
PRODUCT: REVISION DATE: February 21, 2007
USAGE: INDUSTRIAL COATING
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Polyalkylamines N.O.S WHMIS Classification: D2B, E, B3
UN NUMBER: 2735 Class: 8
Packaging Group: II
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 LC50
(species, route) (species, route)
POLYETHER
60-100 NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE
POLYOL
TERTIARY AMINE 15-40 NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE
POLYSILOXANE 3-7 NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Liquid Boiling Point: Not available
Appearance and Odor: Light straw, mild Freezing Point: Not available
Density: 1.01 g/ml
Odor Threshold: Not available Water Solubility: Slight
Evaporation Rate: Not available pH: Not available
Vapor Density: Not available % volatility by volume: 0
Vapor Pressure: Not available Water/Oil Distribution: Not available
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU Accelerator
PRODUCT:
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not applicable
Flammable upper limits (% vol.): Not applicable
If Yes, under what conditions: Flammable lower limits (% vol.): Not applicable
Flash Point (setaflash closed cup): 77掳C
Auto-ignition temperature: Not applicable
Extinguishing methods: Water fog, CO2, dry Dangerous Combustion Products Carbon oxides,
chemical, foam nitrogen oxides
Special Methods: Fire-fighters must wear Protect from mechanical impact: No
complete protective
clothing with respiratory Protect from static discharge: No
equipment
SECTION V: REACTIVITY DATA
Chemical stability: Stable Dangerous decomposition products: Carbon oxides,
If not, under what conditions: nitrogen oxides
Polymerization Risks: No
Incompatibility with other material: No
If Yes, which ones:
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU Accelerator
PRODUCT:
SECTION VI: TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: Will result in eye irritation Carcinogenicity No
Skin: Will result in severe skin irritation and Toxic effects
burns on reproduction: Not applicable
Inhalation: May result in severe respiratory tract Teratogenicity: Not applicable
irritation and burns
Mutagenicity: Not applicable
Ingestion: May lead to gastrointestinal irritation or
ulceration
Product with synergistic
Effects: None known
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU Accelerator
PRODUCT:
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Impervious gloves Ventilation: Use adequate ventilation
Respiratory equipment: If respiratory respiration is Procedure in case
required, use an approved air of leaks: Remove all sources of ignition
purifying respirator (flames, sparks, etc.). Provide
adequate ventilation. Avoid
Eyes: Chemical goggles and full face prolonged breathing of vapors.
shield Remove to a container or absorb
with clay, diatomaceous earth or
Shoes: Security shoes other suitable inert absorbent.
Clothing: Long sleeved, body covering and Handling and
protective clothing Equipment methods: Avoid inhalation, skin and eye
contact. Wash repeatedly with
Other: No soap and water during the
workday.
Warehouse
Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Special Shipping
Instructions: See TDG class.
Waste Disposal: Dispose of residues according to
municipal, provincial or federal
laws for disposal of chemicals.
Do not incinerate closed
containers.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SikaFix庐 PU Accelerator
PRODUCT:
SECTION VIII: FIRST AID
Skin: Wash thoroughly with soap and water.
If irritation persists, consult a physician
Eyes: Rinse eyes immediately with plenty of water for at least 15 minutes.
See a physician immediately.
Inhalation: Remove the affected person to fresh air.
If breathing is difficult, administer oxygen.
Consult a physician if required.
Ingestion: Do not induce vomiting, administer large amounts of water or milk if available.
Transport to a medical facility.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
|