AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
MRW庐 Epoxy Top Coat
PRODUCT: PART A REVISION DATE: February 5, 2007
USAGE: EPOXY COATING FOR USE ON MECHANICAL ROOM WATERPROOFING MEMBRANE
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not regulated WHMIS Classification: D2A
UN NUMBER: Not applicable Class: Not applicable
Packaging Group: Not applicable
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species,
route)
LIQUID EPOXY RESIN 15-40 Not Available 025068-38-6 11400 (oral, rat) Not Available
ANTIMONY TRIOXIDE 3-7 Not Available 001309-64-4 3250 (oral, rat) Not Available
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Liquid Boiling Point: Not Established
Appearance and Odor: Grey, mild odor Freezing Point: Not Established
Density: 1.6 g/ml
Odor Threshold: Not Established Water Solubility: No
Evaporation Rate: Not Applicable PH: Not Established
Vapor Density: Not Applicable %Volatility: Not Available
Vapor Pressure: Not Applicable Water/Oil Distribution: Oil Soluble
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Epoxy Top Coat
PRODUCT: PART A
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not Regulated
Flammable upper limits (% vol.): Not Established
If Yes, under what conditions: Will support combustion Flammable lower limits (% vol.): Not Established
in fire. Flash Point (method used): > 93.3掳C (TCC)
Auto-ignition temperature: Not Established
Dangerous Combustion Products: Carbon oxides,
Extinguishing methods: Carbon dioxide, water aldehydes and
fog, foam or dry toxic organic
chemical. vapors.
Special Methods: Firefighters should wear Protect from mechanical impact: No
full protective clothing
including self-contained Protect from static discharged: No
breathing apparatus
since toxic gases form.
Cool fire-exposed
containers with water or
water fog.
SECTION V: REACTIVITY DATA
Chemical stability: Stable. Dangerous decomposition products: Carbon
If not, under what conditions: monoxide,
aldehydes and
toxics organic
Incompatibility with other material: Yes vapors may be
formed during
If Yes, which ones: Avoid heat, flame combustion.
and contact with
strong oxidizing
Polymerization Risks: Will not occur.
agents. Can
react vigorously
with strong Lewis
or Mineral acids
and strong
mineral and
organic bases,
especially
primary and
secondary
aliphatic amines.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Epoxy Top Coat
PRODUCT: PART A
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause eye irritations. Carcinogenicity: Antimony trioxide ACGIH: A2
Skin: May be irritating to the skin, may cause Toxic effects
sensitization. on reproduction: Possible Risk: Zinc Borate
Inhalation: May irritate lungs, may cause an allergic Teratogenicity: No
reaction.
Mutagenicity: No
Ingestion: May cause irritation of the gastro-
intestinal system. Product with synergistic
Effects: Not Established
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Epoxy Top Coat
PRODUCT: PART A
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves Ventilation: Sufficient ventilation required.
Respiratory equipment: Not necessary under normal use Procedure in case
of leaks: Absorb with sand or other
Eyes: Safety glasses absorbent material. Residue may
be removed with steam or hot
Shoes: Leather water and soap. All precautions
should be taken when cleaning
Clothing: Rubber Apron the spill with solvent.
Other: Eye wash station, shower Handling and Equipment
methods: Avoid skin, eye and clothing
contact
Warehouse
Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Epoxy Top Coat
PRODUCT: PART A
SECTION VIII: FIRST AID
Skin: Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes: Rinse eyes immediately with plenty of water for at least 15 minutes to ensure
a proper wash.
Consult a physician immediately.
Inhalation: In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion: Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By: Steve Gosselin
Telephone #: (514) 697-2610
Fax #: (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
MRW庐 Epoxy Top Coat
PRODUCT: PART B REVISION DATE: February 5, 2007
USAGE: PART 鈥淏鈥? OF A 2-PART EPOXY COATING FOR USE ON MECHANICAL ROOM
WATERPROOFING MEMBRANE
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Paint Related Material WHMIS Classification: E
UN NUMBER: 3066 Class: 8
Packaging Group: III
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
GLYCERYL POLY
(OXYPROPYLENE) 5-10 Not Available 064852-22-8 2690 (oral, rat) Not Available
TRIAMINE
MODIFIED
1-5 Not Available 90-72-2 1635 (oral, rat) Not Available
AROMATIC AMINE
MODIFIED
10-30 Not Available MIXTURE 2400 (oral, rat) Not Available
POLYAMINE
ALKYL PHENOL 10-30 Not Available 084852-15-3 580 (oral, rat) Not Available
N-(2-AMINOETHYL)
3-7 Not Available 000140-31-8 2140 (oral, rat) Not Available
PIPERAZINE
POLYOXYPRO-
15-40 Not Available 009046-10-0 2885 (oral, rat) Not Available
PYLENEDIAMINE
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Liquid Boiling Point: Not Established
Appearance and Odor: Dark Amber with amine odor Freezing Point: Not Established
Odor Threshold: Not Established Density: 1.0 g/ml
Evaporation Rate: Not Applicable Water Solubility: Partial
Vapor Density: Not Applicable PH: Alkaline
Vapor Pressure: < 0.1 at 20掳C % volatility: 0
Water/Oil Distribution: Oil Soluble
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Epoxy Top Coat
PRODUCT: PART B
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: None
If Yes, under what conditions: Liquid will support Flammable upper limits (% vol.): Not Applicable
combustion in fire. Flammable lower limits (% vol.): Not Applicable
Flash Point (method used): > 93.3掳C
(SETAFLASH)
Extinguishing methods: Carbon Dioxide, water Auto-ignition temperature: Not Established
fog, foam or dry Dangerous Combustion Products: Carbon oxides
chemical. and nitrogen
oxides.
Special Methods: Fire fighters should wear Protect from mechanical impact: No
full protective clothing
including self-contained Protect from static discharge: No
breathing apparatus
since toxic gases are
emitted. When heated in
fire, explosive gas
mixtures with air can
form. Cool fire-exposed
containers with water or
water fog.
SECTION V: REACTIVITY DATA
Chemical stability: Yes Dangerous decomposition products: Carbon oxides
If not, under what conditions: Avoid excessive and nitrogen
heat, an open oxides.
flame and all
other ignition
sources.
Incompatibility with other material: Yes Polymerization Risks: No
If Yes, which ones: Strong oxidizing
substances such
as organic
peroxides or
nitric acid.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Epoxy Top Coat
PRODUCT: PART B
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause eye irritations. Carcinogenicity: Not established
May cause severe burns.
May cause blindness. Toxic effects
on reproduction: Not established
Skin: May be irritating to the skin, may cause
severe burns, can be absorbed by skin. Teratogenicity: Not established
Contact may cause necrosis, dermatitis,
Mutagenicity: Not established
allergic reactions, and sensitization.
Inhalation: Vapors or mist of this product may cause Product with synergistic
irritation. effects: Not established
Ingestion: May cause severe burns to the mouth,
throat, stomach. May cause nausea,
vomiting, dizziness, diarrhea, damages to
the lungs and death.
An over-exposure may cause breathing difficulty,
headaches, nausea, vomiting, and damage to the lungs,
sensitization, and dizziness.
May cause problems to the skin, eyes, and lungs. May
aggravate respiratory and allergic problems.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Epoxy Top Coat
PRODUCT: PART B
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Not necessary under normal use. Procedure in case
of leaks: Absorb with sand or other
Eyes: Full face mask or safety glasses absorbent material.
Shoes: Leather Handling and Equipment
methods: Avoid skin, eye and clothing
Clothing: Rubber Apron contact
Other: Eye wash station, shower Warehouse
Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Keep away from heat and open
flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Epoxy Top Coat
PRODUCT: PART B
SECTION VIII: FIRST AID
Skin: Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Throw away shoes that were soiled on the inside.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes: Rinse eyes immediately with plenty of water for several minutes, while holding eyelids
wide open, to ensure a proper wash.
The eye rinse within the first minute is essential to ensure maximum protection.
Consult a physician immediately.
Inhalation: In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion: Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By: Steve Gosselin
Telephone #: (514) 697-2610
Fax #: (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
MRW庐 Membrane
PRODUCT: PART A REVISION DATE: February 5, 2007
USAGE: ELASTOMERIC MEMBRANE FOR MECHANICAL ROOM
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not Regulated WHMIS Classification: D2B
UN NUMBER: Not Applicable Class: Not Applicable
Packaging Group: Not Applicable
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
EPOXY RESIN 10-30 Not Available 014228-73-0 > 2000 (oral, rat) Not Available
GLYCIDYL ETHER-
1-5 Not Available 002425-79-8 Not Available Not Available
1,4 BUTANE DIOL
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Liquid Boiling Point: > 300掳C
Appearance and Odor: Grey, mild odor Freezing Point: Not Applicable
Density: 1.1 g/ml
Odor Threshold: Not available Water Solubility: No
Evaporation Rate: Not Applicable PH: Not Established
Vapor Density: Not Applicable % volatility: Not Applicable
Vapor Pressure: Not Applicable Water/Oil Distribution: Oil Soluble
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Membrane
PRODUCT: PART A
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not Regulated
Flammable upper limits (% vol.): Not Applicable
If Yes, under what conditions: Liquid will support Flammable lower limits (% vol.): Not Applicable
combustion in fire. Flash Point (method used): > 93.3掳C (TCC)
Auto-ignition temperature: Not Established
Dangerous Combustion Products: Carbon oxides,
Extinguishing methods: Carbon Dioxide, water nitrogen oxides
fog, foam or dry and TDI vapors.
chemical.
Protect from mechanical impact: No
Special Methods: Fire fighters should wear
full protective clothing Protect from static discharge: No
including self-contained
breathing apparatus
since toxic gases are
emitted. When heated in
fire, explosive gas
mixtures with air can
form. Cool fire-exposed
containers with water or
water fog.
SECTION V: REACTIVITY DATA
Chemical stability: Unstable Dangerous decomposition products: Carbon oxides,
If not, under what conditions: Avoid nitrogen oxides
temperatures and TDI vapors.
above 40掳C.
Incompatibility with other material: Yes Polymerization Risks: May occur.
If Yes, which ones: Caustic soda,
tertiary amines
and water.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Membrane
PRODUCT: PART A
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause eye irritations. Carcinogenicity: No
Skin: May be irritating to the skin, may cause Toxic effects
sensitization. on reproduction: No
Inhalation: May irritate lungs, may cause an allergic Teratogenicity: No
reaction.
Mutagenicity: No
Ingestion: May cause an irritation to the gastro-
intestinal system. Product with synergistic
effects: Not Established
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Membrane
PRODUCT: PART A
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Not necessary in a well ventilated Procedure in case
room. of leaks: Absorb with sand or other
absorbent material. Residue may
Eyes: Safety glasses be removed with steam or hot
water and soap. All precautions
Shoes: Leather should be taken when cleaning
the spill with solvent.
Clothing: Rubber Apron
Handling and Equipment
Other: Eye wash station, shower methods: Avoid skin, eye and clothing
contact
Warehouse
Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.
Temperature less than 40掳C.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Membrane
PRODUCT: PART A
SECTION VIII: FIRST AID
Skin: Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes: Rinse eyes immediately with plenty of water for at least 15 minutes to ensure
a proper wash.
Consult a physician immediately.
Inhalation: In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion: Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By: Steve Gosselin
Telephone #: (514) 697-2610
Fax #: (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
MRW庐 Membrane
PRODUCT: PART B REVISION DATE: February 5, 2007
USAGE: AN EPOXY HARDENER TO BE MIXED WITH PART 鈥淎鈥?
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Paint Related Liquid WHMIS Classification: E, D2B
UN NUMBER: 3066 Class: 8
PACKAGING GROUP: III
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
MODIFIED POLYAMINE 30-60 Not Available MIXTURE 1750 (oral, rat) Not available
MODIFIED AROMATIC 0.5 mg/L/4H
10-30 Not Available 90-72-2 1635 (oral, rat)
AMINE (Inh, rat)
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Liquid Boiling Point: > 200掳C
Appearance and Odor: Amber liquid with amine odor Freezing Point: Not Applicable
Density: 1.0 g/ml
Odor Threshold: Not Established Water Solubility: Slight
Evaporation Rate: Not Available PH: 11 - 12
Vapor Density: Not Available % volatility: Not established
Vapor Pressure: Not Available Water/Oil Distribution: Oil Soluble
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Membrane
PRODUCT: PART B
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: None
Flammable upper limits (% vol.): Not Applicable
If Yes, under what conditions: Liquid will support Flammable lower limits (% vol.): Not Applicable
combustion in fire. Flash Point (method used): > 93.3掳C
Auto-ignition temperature: Not Established
Dangerous Combustion Products: Carbon oxides,
nitrogen oxides.
Extinguishing methods: Carbon Dioxide, water
fog, foam or dry Protect from mechanical impact: No
chemical.
Protect from static discharge: No
Special Methods: Fire fighters should wear
full protective clothing
including self-contained
breathing apparatus
since toxic gases are
emitted. When heated in
fire, explosive gas
mixtures with air can
form. Cool fire-exposed
containers with water or
water fog.
SECTION V: REACTIVITY
Chemical stability: Yes Dangerous decomposition products: Carbon oxides,
If not, under what conditions: avoid excessive nitrogen oxides.
heat, an open
flame and all
Polymerization Risks: No
other ignition
sources.
Incompatibility with other material: Yes
If Yes, which ones: Strong oxidizing
substances such
as organic
peroxides or
nitric acid.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Membrane
PRODUCT: PART B
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause irritations, may cause severe Carcinogenicity: No
burns, and may cause blindness. Toxic effects
on reproduction: No
Skin: May be irritating, may be absorbed by the
skin, may cause severe burns, may cause Teratogenicity: No
dermatitis, necrosis, allergic reaction,
Mutagenicity: No
sensitization.
Inhalation: Vapors or mist of this product may cause Product with synergistic
irritation. effects: Not Established
Ingestion: May cause severe burns to the mouth,
throat, stomach. May cause nausea,
vomiting, fainting, dizziness, bleeding of
the gastro-intestinal system, diarrhea,
damages to the lungs, and death.
An over exposure may cause breathing difficulty,
sensitization, headaches, nausea, vomiting, fainting, lung
damages. May accentuate respiratory, eye, lung, skin and
allergic problems.
An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Membrane
PRODUCT: PART B
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Not necessary in a well-ventilated Procedure in case
room. of leaks: Absorb with sand or other
absorbent material.
Eyes: Facial mask or safety glasses
Handling and Equipment
Shoes: Leather methods: Avoid skin, eye and clothing
contact
Clothing: Rubber Apron
Warehouse
Other: Shower or eye bath Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Keep away from heat and open
flame. Temperature less than
40掳C
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
MRW庐 Membrane
PRODUCT: PART B
SECTION VIII: FIRST AID
Skin: Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Throw out shoes that were dirtied on the inside.
Wash clothes before wearing again.
Consult a physician if required.
Eyes: Rinse eyes immediately with plenty of water keeping the eyelids open in order to
ensure a complete rinsing.
This should last at least 10 minutes for maximum protection. The rinsing of the
eyes in less than 1 minute of exposure is essential to assure maximum
protection.
Consult a physician immediately.
Inhalation: In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion: Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By: Steve Gosselin
Telephone #: (514) 697-2610
Fax #: (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
|