AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
LOADFLEX庐 2 PART A
PRODUCT: REVISION DATE: February 15, 2006
USAGE: SEMI-RIGID, EPOXY CONTROL JOINT SEALER
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
(514) 697-2610
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not Regulated
UN NUMBER: Not Regulated WHMIS Classification : D2B
Packaging Group: Not Regulated Class: Not Regulated
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
60-80 25068-38-6
EPOXY RESIN Not Available Not Available Not Available
BLOCKED <20 Not Established
Not Available. Not Available Not Available
PREPOLYMER
<5 16245-97-9 Not Available
ALIPHATIC Not Available Not Available
GLYCIDYL ETHER
SECTION III: PHYSICAL CHARACTERISTICS
Physical State : Liquid Boiling Point : Not Established
Appearance and Odor : Grey viscous liquid with low odor Freezing Point : Not Established
Odor Threshold : Not Established Density : >1.1 g/ml
Evaporation Rate : Not Established Solubility in water : None
Vapor Density : Not established PH : Not Established
Vapor Pressure : Not Established % volatile : Not Established
Coefficient water/oil : Not Established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
LOADFLEX庐 2
PRODUCT: PART A
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability :No TDG Flammability Class :Not Regulated
If Yes, under what conditions : Flammable upper limits (% vol.) :Not Established
Flammable lower limits (% vol.) :Not Established
:> 96 掳C
Flash Point (method used)
Extinguishing methods: Foam, CO2, water fog. Auto-ignition temperature :Not Established
Dangerous Combustion Products: CO, CO2, NOX
Special Methods: Fire fighters must wear Protect from mechanical impact :No
usual protective clothing
and respiratory Protect from static discharge :No
equipment. A water hose
may be used to cool the
containers and dissipate
the vapors.
SECTION V: REACTIVITY DATA
Chemical stability :Yes Dangerous decomposition products :CO, CO2, NOX
If not, under what conditions :Excessive heat Polymerization Risks :No
will degrade
epoxy resin
Incompatibility with other material : Yes
If Yes, which ones :Strong oxidizers,
Strong Bases
Strong Acids
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
LOADFLEX庐 2
PRODUCT: PART A
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause irritation, sensitization. Carcinogenicity :No
Skin: May cause irritation, sensitization. Toxic effects
on reproduction :No
Inhalation: Vapor or mist may cause irritation, allergic
reaction. Teratogenicity :No
Ingestion: May cause irritation, sensitization to the Mutagenicity :No
gastro-intestinal system.
Product with synergistic
effect. :No
Chronic or acute exposure will increase the toxic effects mentioned in this section.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
LOADFLEX庐 2
PRODUCT: PART A
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: Not necessary under normal use. Procedure in case
NIOSH/MSHA approved mask for of leaks: Absorb with sand or other
organic vapor if the ventilation is absorbent material.
inadequate
Handling and Equipment
Eyes :Full face mask or safety glasses methods: Avoid skin, eye and clothing
contact
Shoes :Leather
Warehouse
Clothing :Rubber Apron Requirements: Keep all containers closed in a
cool, dry area.
Other :Eye wash station, shower Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
LOADFLEX庐 2
PRODUCT: PART A
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Discard shoes with interior contamination.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for at least 15 minutes to ensure a
proper wash.
The eye rinse within the first minute is essential to ensure maximum protection.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Safety Data Sheet corresponds to our level of knowledge at the time of publication. All
warranties are excluded. Our most current General Sales Conditions shall apply. Please consult the Technical Data
Sheet prior to any use and processing.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
SECTION I: PRODUCT INFORMATION
LOADFLEX庐 2 PART B
PRODUCT: REVISION DATE: February 15, 2006
USAGE: SEMI-RIGID, EPOXY CONTROL JOINT SEALER
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Amines, Liquid, Corrosive, N.O.S. (Amine Blends)
UN NUMBER: 2735 WHMIS Classification : D2B, E
Packaging Group: III Class: 8
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
100 140-31-8
AMINE BLEND Not Available Not Available Not Available
Not Available 100-51-6 Not Available Not Available
Not Available. 143-23-7 Not Available Not Available
Not Available 84852-15-3 Not Available Not Available
SECTION III: PHYSICAL CHARACTERISTICS
Physical State : Liquid Boiling Point : Not Established
Appearance and Odor : Amber liquid with strong odor Freezing Point : Not Established
Odor Threshold : Not Established Density : >0.96 g/ml
Evaporation Rate : Not Established Solubility in water : None
Vapor Density : Not established PH : Not Established
Vapor Pressure : Not Established % volatile : Not Established
Coefficient water/oil : Not Established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
LOADFLEX庐 2
PRODUCT: PART B
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability :No TDG Flammability Class :Not Regulated
If Yes, under what conditions : Flammable upper limits (% vol.) :Not Established
Flammable lower limits (% vol.) :Not Established
:> 96 掳C (TCC)
Flash Point (method used)
Extinguishing methods: Foam, CO2, water fog. Auto-ignition temperature :Not Established
Dangerous Combustion Products: CO, CO2, NOX
Special Methods: Fire fighters must wear
usual protective clothing Protect from mechanical impact :No
and respiratory
equipment. A water hose
may be used to cool the Protect from static discharge :No
containers and dissipate
the vapors.
SECTION V: REACTIVITY DATA
Chemical stability :Yes Dangerous decomposition products :CO, CO2, NOX
If not, under what conditions : Polymerization Risks :No
Incompatibility with other material : Yes
If Yes, which ones : Strong
oxidizers, strong
bases, and
strong acids.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
LOADFLEX庐 2
PRODUCT: PART B
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause irritation, sensitization. Carcinogenicity :No
Skin: May cause irritation, sensitization. Toxic effects
on reproduction :No
Inhalation: May cause irritation, sensitization.
Teratogenicity :No
Ingestion: May cause irritation, sensitization.
Mutagenicity :No
Product with synergistic
Overexposure may cause breathing difficulties, effect. :No
sensitization, headaches, nausea, vomiting, lung damage,
fainting, and ulcers. May aggravate respiratory, skin, eye,
lung problems and allergies.
Chronic or acute exposure will increase the problems mentioned in this section.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
LOADFLEX庐 2
PRODUCT: PART B
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Procedure in case
Respiratory equipment: Not necessary under normal use. of leaks: Absorb with sand or other
NIOSH/MSHA approved mask for absorbent material.
organic vapor if the ventilation is
Handling and Equipment
inadequate
methods: Avoid skin, eye and clothing
Eyes :Full face mask or safety glasses contact
Shoes :Leather Warehouse
Requirements: Keep all containers closed in a
Clothing :Rubber Apron cool, dry and well ventilated area.
Keep away from heat and open
Other :Eye wash station, shower flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.
LOADFLEX庐 2
PRODUCT: PART B
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Discard shoes with interior contamination.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for at least 15 minutes to ensure a
proper wash.
The eye rinse within the first minute is essential to ensure maximum protection.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Safety Data Sheet corresponds to our level of knowledge at the time of publication. All
warranties are excluded. Our most current General Sales Conditions shall apply. Please consult the Technical Data
Sheet prior to any use and processing.
|