Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

025085-99-8
2461-15-6

File Name: sika_ca---con-msds-sikadur43patchpak-ca.asp
                                                                                                             AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


SECTION I: PRODUCT INFORMATION


Sikadur庐 43 Patch Pak
PRODUCT: PART A REVISION DATE: May 15, 2007

USAGE ALL IN ONE EPOXY MORTAR PATCHING

MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9

EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666

TDG CLASSIFICATION: Not regulated WHMIS Classification : D2B
UN NUMBER: Not applicable Class: Not applicable
Packaging Group: Not applicable


SECTION II: HAZARDOUS INGREDIENTS

Hazardous ingredients % T.L.V. # CAS LD50(mg/kg) LC50
(species, route) (species, route)

EPOXY RESIN 60-100 Not available 025085-99-8 > 5000 (oral, rat) Not available

ETHYL HEXYL
10-30 Not Available 2461-15-6 7800 (oral, rat) Not available
GLICIDIC ETHER




SECTION III: PHYSICAL CHARACTERISTICS


Physical State: Liquid Boiling Point: Not established
Appearance and Odor: Amber liquid, ether odor Freezing Point: Not established
Density: 1.1 g/ml
Odor Threshold: Not established Water Solubility: No
Evaporation Rate: Not applicable pH: Not established
Vapor Density: Not applicable % volatility: Not applicable
Vapor Pressure: Not applicable Water/Oil Distribution: Not established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART A

SECTION IV: FIRE AND EXPLOSION HAZARDS


Flammability: No TDG Flammability Class: Not regulated
Flammable upper limits (% vol.): Not applicable
If Yes, under what conditions: Flammable lower limits (% vol.): Not applicable
Flash Point (method used): Not applicable
Auto-ignition temperature: Not established
Extinguishing methods: Foam, dry chemical Dangerous Combustion Products: Carbon oxides,
products, CO2, water phenol
hose.

Special Methods: Fire fighters must wear Protect from mechanical impact: No
usual protective clothing
and respiratory
Protect from static discharge: No
equipment. A water hose
may be used to cool the
containers and dissipate
the vapors.




SECTION V: REACTIVITY DATA

Chemical stability: Yes, but excessive heat
Dangerous decomposition products: Carbon oxides,
will degrade the resin.
phenol.
If not, under what conditions:



Polymerization Risks: May polymerize
Incompatibility with other material: Yes
at very high
temperatures.
If Yes, which ones: Base, strong
acid, oxidizer.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART A

SECTION VI: TOXIC PROPERTIES


ROUTE OF ENTRY / CONTACT


Eyes: May cause eye irritations. Carcinogenicity: No


Skin: May be irritating to the skin, may cause Toxic effects
sensitization. on reproduction: No


Inhalation: May irritate lungs, may cause an allergic Teratogenicity: No
reaction.

Mutagenicity: No
Ingestion: May cause an irritation to the gastro-
intestinal system.
Product with synergistic
effects: Not established




An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART A

SECTION VII: PREVENTIVE MEASURES


PERSONAL PROTECTIVE EQUIPMENT OTHERS


Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required

Respiratory equipment: Not necessary under normal use. Procedure in case
of leaks: Absorb with sand or other
Eyes: Safety glasses absorbent material. Residue may
be removed with steam or hot
Shoes: Leather water and soap. All precautions
should be taken when cleaning
Clothing: Rubber apron the spill with solvent.

Other: Eye wash station, shower Handling and Equipment
Methods: Avoid skin, eye and clothing
contact

Warehouse
Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.

Special Shipping
Instructions: See TDG class

Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART A

SECTION VIII: FIRST AID



Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Wash clothing before re-wearing.
Consult a physician if required.


Eyes : Rinse eyes immediately with plenty of water for at least 15 minutes to ensure a
proper wash.
Consult a physician immediately.


Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.


Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.




SECTION IX: PREPARATION INFORMATION



Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792




Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.

SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.

All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


SECTION I: PRODUCT INFORMATION


Sikadur庐 43 Patch Pak
PRODUCT: PART B REVISION DATE: May 15, 2007

USAGE: ALL IN ONE EPOXY MORTAR PATCHING

MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9

EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666

TDG CLASSIFICATION: Paint related liquid WHMIS Classification : D2A, E
UN NUMBER: 3066 Class: 8
Packaging Group: III


SECTION II: HAZARDOUS INGREDIENTS

Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)

4000 mg/m3 (rat)
BENZYL ALCOHOL 10-30 Not Available 100-51-6 1230 (oral, rat)

ALIPHATIC AMINE AND
EPOXY RESIN 30-60 Not Available Not Available Not Available Not Available
COPOLYMER

NONYL PHENOL 10-30 Not Available 84852-15-3 580 (oral, rat) Not Available

TRIDIMETHYLAMINO
10-30 Not Available 90-72-2 1635 (oral, rat) 0.5 mg/L (rat)
METHYL PHENOL 2, 4, 6




SECTION III: PHYSICAL CHARACTERISTICS


Physical State: Liquid Boiling Point: Not Established
Appearance and Odor: Amber liquid with amine odor Freezing Point: Not Established
Density: 0.98 g/ml
Odor Threshold: Not Established Water Solubility: Partial
Evaporation Rate: Not Applicable pH: Not Established
Vapor Density: Not Established % volatility: Not Applicable
Vapor Pressure: Not Established Water/Oil Distribution: Not Established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART B

SECTION IV: FIRE AND EXPLOSION HAZARDS


Flammability: Combustible TDG Flammability Class: Not Regulated
Flammable upper limits (% vol.): Not Established
If Yes, under what conditions: Flames and sparks. Flammable lower limits (% vol.): Not Established
Flash Point (method used): 103掳C
Extinguishing methods: Foam, dry chemical Auto-ignition temperature: Not Established
products, CO2, water Dangerous Combustion Products: Carbon oxides,
hose. nitrogen oxides,
aldehyde, ketone
Special Methods: Fire fighters must wear
usual protective clothing Protect from mechanical impact: No
and respiratory
equipment. A water hose Protect from static discharge: No
may be used to cool the
containers and dissipate
the vapors.




SECTION V: REACTIVITY


Chemical stability: Yes Dangerous decomposition products: Carbon oxides,
nitrogen oxides,
If not, under what conditions: aldehyde, ketone



Incompatibility with other material: Yes Polymerization Risks: No
If Yes, which ones: Acid, strong
oxidizer, organic
halogen,
aldehydes,
ketone, nitrate,
acrylate.
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART B

SECTION VI: TOXIC PROPERTIES


ROUTE OF ENTRY / CONTACT


Eyes: May cause eye irritations. May cause Carcinogenicity: No
severe burns. May cause blindness.

Toxic effects
Skin: May be irritating to the skin, may cause on reproduction: No
severe burns. May cause dermatitis,
allergic reactions, and sensitization.
Teratogenicity: No

Inhalation: Vapors or mist of this product may cause
irritation. Mutagenicity: Yes


Ingestion: May cause severe burns to the mouth, Product with synergistic
throat, stomach. May cause vomiting, effects: No
nausea, fainting, dizziness, diarrhea,
damages to the lungs, bleeding of the
gastro-intestinal system and death.


An over-exposure may cause breathing difficulty,
headaches, nausea, damages to the lungs, sensitization,
dizziness, vomiting, fainting and ulcers. May cause
problems to the skin, eyes, and lungs. May aggravate
respiratory and allergic problems.




An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART B

SECTION VII: PREVENTIVE MEASURES


PERSONAL PROTECTIVE EQUIPMENT OTHERS


Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required

Respiratory equipment: Not necessary under normal use. Procedure in case
Of leaks: Absorb with sand or other
Eyes: Full face mask or safety glasses absorbent material.

Shoes: Leather Handling and Equipment
Methods: Avoid skin, eye and clothing
Clothing: Rubber Apron contact

Other: Eye wash station, shower Warehouse
Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Keep away from heat and open
flame.
Special Shipping
Instructions: See TDG class

Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART B

SECTION VIII: FIRST AID


Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Throw away shoes that were soiled on the inside.
Wash clothing before re-wearing.
Consult a physician if required.


Eyes : Rinse eyes immediately with plenty of water for several minutes, while holding
eyelids wide open, to ensure a proper wash.
The eye rinse within the first minute is essential to ensure maximum protection.
Consult a physician immediately.


Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.


Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.




SECTION IX: PREPARATION INFORMATION


Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792




Notice To Reader

The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.

SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.

All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191 A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


SECTION I: PRODUCT INFORMATION


Sikadur庐 43 Patch Pak
PRODUCT: PART C REVISION DATE: May 15, 2007

USAGE: ALL IN ONE EPOXY MORTAR PATCHING

MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9

EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666

TDG CLASSIFICATION: Not Regulated WHMIS Classification : D2A
UN NUMBER: Not Established Class: Not Applicable
Packaging Group: Not Applicable


SECTION II: HAZARDOUS INGREDIENTS

Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)

0.1 mg/m3
SILICA SAND 60-100 14808-60-7 Not Available Not Available




SECTION III: PHYSICAL CHARACTERISTICS


Physical State: Powder Boiling Point: Not Applicable
Appearance and Odor: Grey powder with no odor Freezing Point: Not Applicable
Density: 2.65 g/ml
Odor Threshold: Not Applicable Water Solubility: No
Evaporation Rate: Not Applicable pH: Not Established
Vapor Density: Not Applicable % volatility: 0
Vapor Pressure: Not Applicable Water/Oil Distribution: Not Established
AQ 191 A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART C

SECTION IV: FIRE AND EXPLOSION HAZARDS


Flammability: No TDG Flammability Class: Not Applicable
Flammable upper limits (% vol.): Not Applicable
If Yes, under what conditions: Flammable lower limits (% vol.): Not Applicable
Flash Point (method used): Not Applicable
Extinguishing methods: Not Applicable Auto-ignition temperature: Not Applicable
Dangerous Combustion Products: Not Applicable


Special Methods: None Protect from mechanical impact: No

Protect from static discharge: No




SECTION V: REACTIVITY


Chemical stability: Yes Dangerous decomposition products: None

If not, under what conditions:




Incompatibility with other material: No Polymerization Risks: No

If Yes, which ones:
AQ 191 A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART C

SECTION VI: TOXIC PROPERTIES


ROUTE OF ENTRY / CONTACT


Eyes: May cause irritations. Carcinogenicity: NTP: no, OSHA: no,
IARC: yes. According to
IARC the quartz silica is a
Skin: May be irritating. probable cause of
cancer.

Inhalation: May irritate lungs. A regular exposure to
quartz silica may cause changes to the Toxic effects
lung fibers and lead to silicosis. It may on reproduction: No
also irritate the nasal tissue.

Teratogenicity: No
Ingestion: May cause an irritation to the gastro-
intestinal system.
Mutagenicity: No


Product with synergistic
effects: Unknown




An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory
problems.
AQ 191 A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART C

SECTION VII: PREVENTIVE MEASURES


PERSONAL PROTECTIVE EQUIPMENT OTHERS


Gloves: Ordinary Ventilation: Sufficient ventilation required to
control the quantity of dust.
Respiratory equipment: NIOSH approved mask for dust
when the permissible exposure Procedure in case
limit might be exceeded. of leaks: Try to recycle the product if not
contaminated. Protect yourself
Eyes: Safety glasses from the dust. Pick-up the spill
with vacuum in order to reduce
Shoes: Ordinary dust spread.

Clothing: Ordinary Handling and Equipment
Methods: Avoid dust contact.
Other: No
Warehouse
Requirements: Keep all containers closed in a
dry area.

Special Shipping
Instructions: No

Waste Disposal: Dispose like domestic garbage.
AQ 191 A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App S.G.


Sikadur庐 43 Patch Pak
PRODUCT: PART C

SECTION VIII: FIRST AID



Skin : Clean with plenty of soap and water.
Consult a physician if necessary.


Eyes : Clean with water for at least 15 minutes.
Consult a physician if necessary.


Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if necessary.


I Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.




SECTION IX: PREPARATION INFORMATION




Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792




Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.

SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.

All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
servisol_co_uk---dcolle_tiquettes_fps-ab38060-24.asp 38060-24-1
servisol_co_uk---isolier_72-bb27350-16.asp 27350-16-3 63148-62-9
servisol_co_uk---pasta_de_cobre-bb14150-6.asp 7440-50-8
servisol_co_uk---quick_fix-bb18120-16.asp 18120-16-3 123-31-9 7085-85-0
servisol_co_uk---servisol_super_10.asp 90622-57-4 68476-85-7
servisol_co_uk---tm_712-ab59210-24.asp 59210-24-3
servisol_co_uk---verdnner_fr_urethan_71-bb27510-5.asp 67-64-1
sika_ca---con-msds-albitolconcentrate-ca.asp N/A
sika_ca---con-msds-betonite50-e.asp 000107-21-1 014808-60-7
sika_ca---con-msds-diamag7-ca.asp 14808-60-7 65997-15-1
sika_ca---con-msds-duoflexnssl-ca.asp N/A
sika_ca---con-msds-eversettypeii-ca.asp 025068-38-6 14808-60-7 084652-15-3
sika_ca---con-msds-fastflorcr-ca.asp 025068-38-6
sika_ca---con-msds-florsealwb-ca.asp N/A
sika_ca---con-msds-flortec142228-ca.asp 1330-20-7
sika_ca---con-msds-loadflex-ca.asp 025068-38-6 064742-48-9
sika_ca---con-msds-loadflex2-ca.asp 25068-38-6 16245-97-9
sika_ca---con-msds-mrwsystem-ca.asp 025068-38-6 001309-64-4
sika_ca---con-msds-not-required.asp N/A
sika_ca---con-msds-rugasols-ca.asp N/A
sika_ca---con-msds-sika-aea-14-e.asp N/A
sika_ca---con-msds-sika-cni-e.asp N/A
sika_ca---con-msds-sika-urethane-thinner-e.asp 108-65-6
sika_ca---con-msds-sikaanchorfix-1.asp 14808-60-7 2358-84-1 1321-74-0
sika_ca---con-msds-sikaanchorfix2-ca.asp 036425-15-7 000100-42-5 80-62-6 13048-33-4 25068-38-6 14808-60-7
sika_ca---con-msds-sikaanchorfix3_4-ca.asp 25068-38-6
sika_ca---con-msds-sikabondconstructionadhesive-e.asp 1305-78-8 1330-20-7
sika_ca---con-msds-sikabondt2-e.asp 1305-78-8 1330-20-7 64742-88-7 7631-86-9
sika_ca---con-msds-sikabondt54-ca.asp 101-68-8
sika_ca---con-msds-sikacarbodur-ca.asp N/A
sika_ca---con-msds-sikacrete-08scc-e.asp 14808-60-7 65997-15-1
sika_ca---con-msds-sikadur30-ca.asp 025085-99-8 14808-60-7
sika_ca---con-msds-sikadur300-ca.asp 25085-99-8
sika_ca---con-msds-sikadur330-ca.asp 25085-99-8
sika_ca---con-msds-sikadur35himodlv-ca.asp 025085-99-8 84852-15-3 68477-31-6
sika_ca---con-msds-sikadur42groutpakle-ca.asp 2461-15-6 025085-99-8 68477-31-6
sika_ca---con-msds-sikadur42multiflo-ca.asp 2461-15-6 025085-99-8 68477-31-6
sika_ca---con-msds-sikadur43patchpak-ca.asp 025085-99-8 2461-15-6
sika_ca---con-msds-sikadur52-ca.asp 025085-99-8 68477-31-6
sika_ca---con-msds-sikadur55slv-ca.asp 17557-23-2 025085-99-8
sika_ca---con-msds-sikaduraggregate25-ca.asp 14808-60-7 68187-64-4
sika_ca---con-msds-sikaduraggregate8-ca.asp 14808-60-7 68187-64-4
sika_ca---con-msds-sikaduraggroutaggroutrapid-ca.asp 25085-99-8 28064-14-4 100-51-6 2461-15-6
sika_ca---con-msds-sikadurltgrout-ca.asp 36425-16-8 100-42-5 91-66-7
sika_ca---con-msds-sikadurwdeprimer-ca.asp 25085-99-8 2461-15-6
sika_ca---con-msds-sikadur_crack_fix.asp 025085-99-8 84852-15-3 68477-31-6
sika_ca---con-msds-sikaequipmentcleaner-ca.asp 1330-20-7 78-83-1
sika_ca---con-msds-sikaferrogard903-ca.asp 64-17-5
sika_ca---con-msds-sikafixpu-ca.asp N/A
sika_ca---con-msds-sikaflex-2c-colorpack.asp 26761-40-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC