AQ191A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
SECTION I: PRODUCT INFORMATION
Sika速 AnchorFix速-2CA
PRODUCT: PART A REVISION DATE: February 14, 2007
USAGE: HIGH-MODULUS, HIGH-STRENGTH, STRUCTURAL, NON-ABRASIVE, EPOXY
ACRYLATE HYBRID ANCHORING GEL
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Adhesive (containing flammable liquid) WHMIS Classification: D2A, B4
UN NUMBER: 1133 Class: 3
Packaging Group: III
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
EPOXY
30-50 036425-15-7
RESIN/EPOXY Not Available Not Available Not Available
ACRYLATE BLEND
000100-42-5 Not Available Not Available
80-62-6 Not Available Not Available
13048-33-4 Not Available Not Available
25068-38-6 Not Available Not Available
,1 mg/m3
SILICA SAND 30-60 14808-60-7 Not available Not available
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Paste Boiling Point: Not Established
Appearance and Odor: White Paste/Distinctive Odor Freezing Point: Not Established
Odor Threshold: Not Established Density: 1.5 g/ml
Evaporation Rate: Not Established Solubility in water: Not Established
Vapor Density: Not Established PH: Not Established
Vapor Pressure: Not Established % volatile: Not Established
Coefficient water/oil: Not Established
AQ191A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-2CA
PRODUCT: PART A
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: Yes TDG Flammability Class: 3
If Yes, under what conditions: Avoid flames, sparks or Flammable upper limits (% vol.): 12.5%
static discharge. Flammable lower limits (% vol.): 2.1%
Flash Point (method used): 18属C (TCC)
Auto-ignition temperature: Not Established
Extinguishing methods: Foam, CO2, and dry Dangerous Combustion Products: Carbon oxides,
chemicals. Hydrocarbons,
Protect from mechanical impact: No
Special Methods: Fire fighters must wear
usual protective clothing Protect from static discharge: No
and respiratory
equipment. When heated
in fire, explosive gas
mixtures with air can
form. A water hose may
be used to cool the
containers and dissipate
the vapors.
SECTION V: REACTIVITY DATA
Chemical stability: Yes
Dangerous decomposition products: Carbon oxides,
Hydrocarbons.
If not, under what conditions:
Polymerization Risks: Will polymerize
with excessive
Incompatibility with other material: Yes
heat or absence
of inhibitor
If Yes, which ones: Strong oxidizers,
strong bases,
heat and flame.
AQ191A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-2CA
PRODUCT: PART A
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause irritation, sensitization. Carcinogenicity: According to the IARC
the silica sand is a
Skin: May cause irritation, sensitization. probable cause of cancer
(D2A).
Inhalation: May cause irritation to the lungs,
sensitization Toxic effects
on reproduction: No
Ingestion: May cause irritation, sensitization of the
gastro-intestinal system. Teratogenicity: No
Mutagenicity: No
Overexposure may cause breathing difficulties,
sensitization, headaches, nausea, vomiting, lung damage, Product with synergistic
fainting, and ulcers. effect: Not established
May aggravate respiratory, skin, eye, lung problems and
allergies.
Chronic or acute exposure will increase the problems mentioned in this section.
AQ191A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-2CA
PRODUCT: PART A
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required
Respiratory equipment: NIOSH/MSHA approved mask for Procedure in case
organic vapor if the ventilation is of leak: Absorb with sand or other
inadequate absorbent material. Resin residue
may be removed with steam or
Eyes: Full face mask or safety glasses hot water and soap. All
precautions should be taken
Shoes: Leather when cleaning the spill with
solvent.
Clothing: Rubber Apron
Handling and Equipment
Other: Eye wash station, shower methods: Avoid skin, eye and clothing
contact
Warehouse
Requirements: Keep all containers closed in a
cool, dry area. Keep away from
heat and open flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ191A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App SG
Sika速 AnchorFix速-2CA
PRODUCT: PART A
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Discard shoes with interior contamination.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for at least 15 minutes to ensure a
proper wash. The eye rinse within the first minute is essential to ensure
maximum protection.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
AQ 191A
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App. SG
SECTION I: PRODUCT INFORMATION
Sika速 AnchorFix速-2CA
PRODUCT: PART B REVISION DATE: February 14, 2007
USAGE: HIGH-MODULUS, HIGH-STRENGTH, STRUCTURAL, NON-ABRASIVE, EPOXY ACRYLATE
HYBRID GEL ADHESIVE
MANUFACTURER: SIKA CANADA INC.
601, avenue Delmar
Pointe Claire, QC
H9R 4A9
EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666
TDG CLASSIFICATION: Not Regulated WHMIS Classification: C
UN NUMBER: Not Regulated Class: Not Regulated
Packaging Group: Not Regulated
SECTION II: HAZARDOUS INGREDIENTS
Hazardous ingredients % T.L.V. # CAS LD50 (mg/kg) LC50
(species, route) (species, route)
BENZOYL 10-30 94-36-0
Not Available Not Available Not Available
PEROXIDE
BENZYL PHTHALATE 10-30 Not Available 68515-40-2 Not Available Not Available
SECTION III: PHYSICAL CHARACTERISTICS
Physical State: Paste Boiling Point: Not Established
Appearance and Odor: Black Paste / Mild Odor Freezing Point: Not Established
Density: 1.6 g/ml
Odor Threshold: Not Established Solubility in water: Partial
Evaporation Rate: Not Established pH: Not Established
Vapor Density: Not Established % volatile: Not Established
Vapor Pressure: Not Established Coefficient water/oil: Not Established
AQ 191A
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App. SG
Sika速 AnchorFix速-2CA
PRODUCT: PART B
SECTION IV: FIRE AND EXPLOSION HAZARDS
Flammability: No TDG Flammability Class: Not Regulated
If Yes, under what conditions: Flammable upper limits (% vol.): Not Established
Flammable lower limits (% vol.): Not Established
Flash Point (method used): 157属C (TCC)
Extinguishing methods: Foam, CO2, water fog or Auto-ignition temperature: Not Established
dry chemical powder. Dangerous Combustion Products: Carbon oxides
Protect from mechanical impact: No
Special Methods: Fire fighters must wear
usual protective clothing Protect from static discharge: No
and respiratory
equipment. When heated
in fire, explosive gas
mixtures with air can
form. A water hose may
be used to cool the
containers and dissipate
the vapors.
SECTION V: REACTIVITY DATA
Chemical stability: Stable Dangerous decomposition products: Carbon oxides
If not, under what conditions:
Polymerization Risks: No
Incompatibility with other material: Yes
If Yes, which ones: Strong oxidizers,
Strong Bases
AQ 191A
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App. SG
Sika速 AnchorFix速-2CA
PRODUCT: PART B
SECTION VI: TOXIC PROPERTIES
ROUTE OF ENTRY / CONTACT
Eyes: May cause irritation, sensitization. Carcinogenicity: No
Skin: May cause irritation, sensitization. Toxic effects
on reproduction: No
Inhalation: May cause irritation, sensitization of the
lungs. Teratogenicity: No
Ingestion: May cause irritation, sensitization. Mutagenicity: No
Product with synergistic
effect: Not established
Overexposure may cause breathing difficulties,
sensitization, headaches, nausea, vomiting, lung damage,
fainting, and ulcers.
May aggravate respiratory, skin, eye, lung problems and
allergies.
Chronic or acute exposure will increase the problems mentioned in this section.
AQ 191A
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App. SG
Sika速 AnchorFix速-2CA
PRODUCT: PART B
SECTION VII: PREVENTIVE MEASURES
PERSONAL PROTECTIVE EQUIPMENT OTHERS
Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required.
Respiratory equipment: Not necessary under normal Procedure in case
ventilation of leaks: Absorb with sand or other
absorbent material. Residue may
Eyes: Full face mask or safety glasses be removed with steam or hot
water and soap. All precautions
Shoes: Leather should be taken when cleaning
the spill with solvent.
Clothing: Rubber Apron
Handling and Equipment
Other: Eye wash station, shower methods: Avoid skin, eye and clothing
contact
Warehouse
Requirements: Keep all containers closed in a
cool, dry and well ventilated area.
Keep away from heat and open
flame.
Special Shipping
Instructions: See TDG class
Waste Disposal: Dispose of sand and rinse water
according to municipal, provincial
or federal laws for disposal of
chemicals.
AQ 191A
Page 5 of 5
MATERIAL SAFETY DATA SHEET
Sika Canada Inc. Date:99/09/30
App. SG
Sika速 AnchorFix速-2CA
PRODUCT: PART B
SECTION VIII: FIRST AID
Skin : Remove contaminated clothing and shoes.
Wash immediately with plenty of soap and water.
Discard shoes with interior contamination.
Wash clothing before re-wearing.
Consult a physician if required.
Eyes : Rinse eyes immediately with plenty of water for at least 15 minutes to ensure a proper
wash.
The eye rinse within the first minute is essential to ensure maximum protection.
Consult a physician immediately.
Inhalation : In the case of overexposure, evacuate to fresh air.
Consult a physician if required.
Ingestion : Drink plenty of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person.
See a physician immediately.
SECTION IX: PREPARATION INFORMATION
Prepared By : Steve Gosselin
Telephone # : (514) 697-2610
Fax # : (514) 694-2792
Notice To Reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This
information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material,
product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable
as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's
current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone
number listed in Section 1 of this MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE.
SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.
|