MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
Eucalyptol EU100X
PRODUCT USE
Pharmaceutical aid (Flavoring)
MANUFACTURERS NAME: SUPPLIERS NAME:
XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
FPI100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % CAS NUMBER LD50 OF INGREDIENT
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)
Eucalyptol 100 470-82-6 RAT ORAL 2480 mg/kg
C10H18O
SECTION 3 - PHYSICAL DATA
PHYSICAL STATE APPEARANCE ODOR ODOR THRESHOLD (ppm)
Liquid Clear Camphor like Not Available
MELTING POINT (C) BOILING POINT (C) VOLATILITY VAPOR DENSITY VAPOR PRESSURE
1-2掳C 175掳C Not Available Not Available Not Available
pH SPECIFIC GRAVITY @ 25掳C REFRACTIVE INDEX @ 20掳C OPTICAL ROTATION
Not Available 0.924 g/cm鲁 1.458 Not Available
COEFF. WATER/OIL DIST. SOLUBILITY
Not Available Very slightly soluble in cold water
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
Combustible - Keep away from heat, sparks, open flame and other ignition sources.
MEANS OF EXTINCTION
SMALL: Use DRY chemical powder.
LARGE: Use water spray, fog or foam. Do NOT use water jet.
FLAMMABLE LIMITS (% BY VOLUME)
FLASHPOINT (C) AND METHOD AUTOIGNITION TEMPERATURE (C)
TCC 49掳C (120.2掳F) Not Available UPPER: Not Available Not Available
LOWER:
HAZARDOUS COMBUSTION PRODUCTS
(CO,CO2) Oxides of carbon, Acrid smoke and fumes.
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable - Avoid Strong oxidizing agents, strong acid chlorides, acid anhydrides, moisture, light, heat.
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
NO YES
Avoid contact with strong acids, alkali, oxidizing agents, reducing agents.
REACTIVITY, AND UNDER WHAT CONDITIONS
Reactive with oxidizing agents
HAZARDOUS DECOMPOSITION PRODUCTS
The product itself and the products of degradation are not toxic
MATERIAL SAFETY DATA SHEET
EU100X
PRODUCT IDENTIFIER
Eucalyptol
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Hazardous in case of ingestion. Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of inhalation
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
The substance may be toxic to the reproductive system. Repeated or prolonged exposure to the substance can produce target organs damage.
EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT CARCINOGENICITY
Not Available Yes Not Available Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS
TERATOGENICITY
Not Available Female / male Not Available Not Available
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) Approved / Certified vapor respirator Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that
eyewash stations and safety showers are proximal to the work-station location.
LEAK AND SPILL PROCEDURE
Small: Absorb with an inert material and put the spilled material in an appropriate waste disposal.
Large: Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water on the contaminated
surface and allow to evacuate through the sanitary system.
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Do not ingest. Do not breathe gas/fumes/ vapor/spray. Avoid contact with skin and eyes. Wear suitable protective clothing. Keep away from heat and
sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. If feeling unwell seek medical advice immediately and show
the container or label.
STORAGE REQUIREMENTS
Store in a segregated and approved area. Keep container in a cool, well-ventilated area. Keep container tightly closed and sealed until ready for use. Avoid all
possible sources of ignition (spark or flame). Do not store above 23掳C (73.4掳F). Combustible materials should be stored away from extreme heat and away
from strong oxidizing agents.
SPECIAL SHIPPING INFORMATION
DOT CLASS 3: Flammable liquid.
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
SKIN After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running
water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cover the irritated skin with an
emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.
EYES Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15minutes.
Cold water may be used, Warm water must be used. Get medical attention
INHALATION Allow the victim to rest in a well ventilated area. If not breathing give artificial respiration. If breathing is difficult, give oxygen. S
immediate medical attention.
INGESTION Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious perso
Loosen tight clothing such as collar, tie, belt or waistband. Get medical attention if symptoms appear.
IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
SECTION 9 - PREPARATION DATE OF M.S.D.S.
All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS) applies only to the material as packa
If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this MSDS. It shall be the us
responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this MSDS is based on technical
data judged to be reliable, Xenex Laboratories Inc. assumes no responsibility for the completeness or accuracy of the information contained herein.
PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 December 12 2006
|