MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
Almond Oil, sweet OA100X
PRODUCT USE
MANUFACTURERS NAME: SUPPLIERS NAME:
XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
FPI100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % CAS NUMBER LD50 OF INGREDIENT
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)
Almond Oil, sweet 8007-69-0 100 Not Available Not Available
SECTION 3 - PHYSICAL DATA
PHYSICAL STATE APPEARANCE ODOR ODOR THRESHOLD (ppm)
Liquid (Oily Liquid) Yellowish (light) Odorless Not Available
MELTING POINT (C) BOILING POINT (C) VOLATILITY VAPOR DENSITY VAPOR PRESSURE
Not Available Not Available Not Available >1 Not Available
pH SPECIFIC GRAVITY @ 25掳C REFRACTIVE INDEX @ 20掳C OPTICAL ROTATION
Not Available 0.911 Not Available Not Available
COEFF. WATER/OIL DIST. SOLUBILITY
Not Available Insoluble in cold water, hot water
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
May be combustible at high temperature - Slightly flammable to flammable in presence of heat. As with all unsaturated
fats and oils, some porous materials such as rags, paper, insulation or clay when wetted with this product may undergo
spontaneous combustion. Keep such wetted materials well ventilated and in a cool area to prevent possible heat build-
up.
MEANS OF EXTINCTION
SMALL: Use DRY chemical powder.
LARGE: Use water spray, fog or foam. Do NOT use water jet.
FLAMMABLE LIMITS (% BY VOLUME)
FLASHPOINT (C) AND METHOD AUTOIGNITION TEMPERATURE (C)
OPEN CUP >287.78掳C (550掳F) Not Available UPPER: Not Available Not Available
LOWER:
HAZARDOUS COMBUSTION PRODUCTS
(CO,CO2) Oxides of carbon, Acrid smoke and fumes.
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable - Avoid moisture, light, heat, incompatible materials.
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
NO YES
Avoid contact with strong acids, alkali, oxidizing agents, reducing agents.
REACTIVITY, AND UNDER WHAT CONDITIONS
Not Available
HAZARDOUS DECOMPOSITION PRODUCTS
Possibly hazardous short term degradation products are not likely. However, long term degradation products may
arise. The products of degradation are more toxic.
MATERIAL SAFETY DATA SHEET
OA100X
PRODUCT IDENTIFIER
Almond Oil, sweet
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation. Skin: May cause skin irritation in sensitive individuals.
Eyes: May cause eye irritation. Inhalation: Low hazard. Excessive inhalation of oil mist may cause respiratory tract irritation and may affect respiration.
Ingestion: Low hazard.
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
Repeated or prolonged exposure is not known to aggravate medical condition. Skin: Sensitive individuals may experience dermatitis after prolonged or
repeated skin contact.
EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT
TWA: 10 (mg/m3) from ACGIH (TLV) [United States] Inhalation Total Yes Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY
TERATOGENICITY CARCINOGENICITY
Not Available Not Available Not Available Not Available
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
Respiratory protection is not necessary for normal handling and if ventilation is adequate. If ventilation is inadequate and/or if handling of
material produces mist and the concentration of air born particulates exceeds the recommended exposure limits, use a NIOSH approved
respirator.
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) As specified for production environment Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that
eyewash stations and safety showers are proximal to the work-station location.
LEAK AND SPILL PROCEDURE
Small: Absorb with an inert material and put the spilled material in an appropriate waste disposal.
Large: Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water on the contaminated
surface and allow to evacuate through the sanitary system.
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Do not ingest. Do not breathe gas/fumes/ vapor/spray. Avoid contact with skin and eyes. Wear suitable protective clothing. Keep away from heat and
sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. If feeling unwell seek medical advice immediately and show
the container or label.
STORAGE REQUIREMENTS
Keep container tightly closed. Keep container in a cool, dry, well-ventilated area. Combustible materials should be stored away from extreme heat and away
from strong oxidizing agents.
SPECIAL SHIPPING INFORMATION
No special requirements
MATERIAL SAFETY DATA SHEET
OA100X
PRODUCT IDENTIFIER
Almond Oil, sweet
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
SKIN After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running
water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cover the irritated skin with an
emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.
EYES Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15minutes.
Get medical attention if irritation occurs.
INHALATION Allow the victim to rest in a well ventilated area. If not breathing give artificial respiration. If breathing is difficult, give oxygen. S
immediate medical attention.
INGESTION Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious perso
Loosen tight clothing such as collar, tie, belt or waistband. Get medical attention if symptoms appear.
IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
SECTION 9 - PREPARATION DATE OF M.S.D.S.
All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS) applies only to the material as packa
If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this MSDS. It shall be the us
responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this MSDS is based on technical
data judged to be reliable, Xenex Laboratories Inc. assumes no responsibility for the completeness or accuracy of the information contained herein.
PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 March 08 2007
|