MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
Lanolin Hydrous LA121X
PRODUCT USE
MANUFACTURERS NAME: SUPPLIERS NAME:
Xenex Labs XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
SPE100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS
% CAS NUMBER LD50 / LC50 OF INGREDIENT
/ CHEMICAL FORMULA
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)
Lanolin 65 -100 8006-54-0 Not Available Not Available
Water 0.25 - 35 7732-18-5 Not Available Not Available
SECTION 3 - PHYSICAL DATA
PHYSICAL STATE AND APPEARANCE ODOR TASTE ODOR THRESHOLD (ppm)
Solid (Semi-solid; Unctuous mass) Yellowish Slight Not Available Not Available
MELTING POINT (C) BOILING POINT (C) VOLATILITY VAPOR PRESSURE VAPOR DENSITY
Decomposes @ 175掳C 0.25 @ 105掳C Not Available Not Available
38掳C (100.4掳F) - 44掳C
pH SPECIFIC GRAVITY @ 15掳C COEFF. WATER/OIL DIST.
Not Applicable 0.932 - 0.945 Not Available
DISPERSION PROPERTIES / SOLUBILITY
Soluble in Diethyl ether, acetone, chloroform, petroleum ether, benzene, hot alcohol, carbon disulfide. Insoluble in cold,
hot water. Sparingly soluble in cold alcohol.
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
May be combustible at high temperature - Slightly flammable to flammable in presence of heat.
MEANS OF EXTINCTION
SMALL: Use DRY chemical powder.
LARGE: Use water spray, fog or foam. Do NOT use water jet.
FLASHPOINT (C) AND METHOD FLAMMABLE LIMITS (% BY VOLUME) CRITICAL TEMPERATURE
TOC 238掳C (460.4掳F) UPPER: Not Available LOWER: Not Available Not Available
AUTOIGNITION TEMPERATURE (C) HAZARDOUS COMBUSTION PRODUCTS
445掳C (833掳F) (CO,CO2) Oxides of carbon. Acrid smoke and fume
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable - Avoid excess heat and incompatible materials
NO YES
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
Reactive with oxidizing agents
REACTIVITY, AND UNDER WHAT CONDITIONS
Not Available
HAZARDOUS DECOMPOSITION PRODUCTS
Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
The product itself and its products of degradation are not toxic
MATERIAL SAFETY DATA SHEET
LA121X
PRODUCT IDENTIFIER
Lanolin Hydrous
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Slightly hazardous in case of skin contact (permeator), of eye contact (irritant), of ingestion. Non-irritant for skin. Non-
hazardous in case of inhalation.
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
Slightly hazardous in case of skin contact (sensitizer).
EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT CARCINOGENICITY
Not Available Yes Yes Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS
TERATOGENICITY
Not Available Not Available Not Available Not Available
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) No Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user
operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
LEAK AND SPILL PROCEDURE
Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface.
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not ingest. Do not breathe dust. If ingested, seek
medical advice immediately and show the container or the label. Keep away from incompatibles such as oxidizing agents.
STORAGE REQUIREMENTS
Keep container tightly closed. Keep container in a cool, dry, well-ventilated area. Container may be hazardous when empty since they retain product residues
(Dust, Solids) observe all warnings and precautions listed for the product
SPECIAL SHIPPING INFORMATION
No special requirements
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
Wash with soap and water. Remove contaminated clothing and shoes. Get medical attention if
SKIN
irritation develops. Wash clothing before reuse, thoroughly clean shoes before reuse.
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of
EYES
water for at least 15minutes. Get medical attention
If inhaled remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give
INHALATION
oxygen. Get medical attention.
INGESTION Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Loosen tight clothing such as collar, tie, belt or waistband. Get
medical attention if symptoms appear.
IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
SECTION 9 - PREPARATION DATE OF M.S.D.S.
All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS) applies only to the material as packa
If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this MSDS. It shall be the us
responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this MSDS is based on technical
data judged to be reliable, Xenex Laboratories Inc. assumes no responsibility for the completeness or accuracy of the information contained herein.
PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 November 30 2006
|