MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
Hydrazine sulfate HY050X
PRODUCT USE
MANUFACTURERS NAME: SUPPLIERS NAME:
Xenex Labs XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
SPE100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS
% CAS NUMBER LD50 / LC50 OF INGREDIENT
/ CHEMICAL FORMULA
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)
Hydrazine sulfate 100 10034-93-2 RAT ORAL 601 mg/kg
H6N2O4S
SECTION 3 - PHYSICAL DATA
PHYSICAL STATE AND APPEARANCE ODOR TASTE ODOR THRESHOLD (ppm)
Solid Not Available Not Available Not Available
MELTING POINT (C) BOILING POINT (C) VAPOR PRESSURE VAPOR DENSITY VOLATILITY
254掳C (489.2掳F) Decomposes Not Available Not Available Not Available
pH SPECIFIC GRAVITY COEFF. WATER/OIL DIST. DISPERSION PROPERTIES / SOLUBILITY
Not Available 1.378 Not Available Soluble in hot water. Partially soluble in cold water.
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
May be combustible at high temperature - Flammable in presence of open flames and sparks. Slightly flammable to
flammable in presence of heat.
MEANS OF EXTINCTION
SMALL: Use DRY chemical powder.
LARGE: Use water spray, fog or foam. Do NOT use water jet.
FLASHPOINT (C) AND METHOD FLAMMABLE LIMITS (% BY VOLUME) CRITICAL TEMPERATURE
Not Available UPPER: Not Available LOWER: Not Available Not Available
AUTOIGNITION TEMPERATURE (C) HAZARDOUS COMBUSTION PRODUCTS
Not Available Not available
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable
NO YES
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
Not Available
REACTIVITY, AND UNDER WHAT CONDITIONS
Not Available
HAZARDOUS DECOMPOSITION PRODUCTS
The products of degradation are as toxic as the original product
MATERIAL SAFETY DATA SHEET
HY050X
PRODUCT IDENTIFIER
Hydrazine sulfate
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Extremely hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation. Very hazardous
in case of skin contact (corrosive, permeator). The amount of tissue damage depends on length of contact. Eye contact
can result in corneal damage or blindness. Skin contact can produce inflammation and blistering. Inhalation of dust will
produce irritation to gastro-intestinal or respiratory tract, characterized by burning, sneezing and coughing. Severe over-
exposure can produce lung damage, choking, unconsciousness or death. Inflammation of the eye is characterized by
redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or, occasionally,
blistering.
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
Extremely hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation. Very hazardous
in case of skin contact (corrosive, permeator). CARCINOGENIC EFFECTS: Classified 2 (Reasonably anticipated.) by
NTP. The substance is toxic to mucous membranes. Repeated or prolonged exposure to the substance can produce
target organs damage. Repeated exposure of the eyes to a low level of dust can produce eye irritation. Repeated skin
exposure can produce local skin destruction, or dermatitis. Repeated inhalation of dust can produce varying degree of
respiratory irritation or lung damage. Repeated or prolonged inhalation of dust may lead to chronic respiratory irritation.
SYNERGISTIC PRODUCTS
EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT
Not Available Not Available Not Available Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY
TERATOGENICITY CARCINOGENICITY
Not Available Not Available Not Available Anticipated
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) Approved / Certified respirator Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
airborne contaminants below the exposure limit.
LEAK AND SPILL PROCEDURE
Use appropriate tools to put the spilled solid in a convenient waste disposal container.
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Keep container dry. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk,
evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.
Never add water to this product In case of insufficient ventilation, wear suitable respiratory equipment If ingested, seek
medical advice immediately and show the container or the label. Avoid contact with skin and eyes
STORAGE REQUIREMENTS
Keep container tightly closed. Keep container in a cool, dry, well-ventilated area. Container may be hazardous when
empty since they retain product residues (Dust, Solids) observe all warnings and precautions listed for the product.
Corrosive materials should be stored in a separate safety storage cabinet or room
SPECIAL SHIPPING INFORMATION
DOT CLASS 8: Corrosive solid. WHMIS (Canada) CLASS E: Corrosive solid.
MATERIAL SAFETY DATA SHEET
HY050X
PRODUCT IDENTIFIER
Hydrazine sulfate
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
If the chemical got onto the clothed portion of the body, remove the contaminated clothes as
SKIN
quickly as possible, protecting your own hands and body. Place the victim under a deluge shower. If
the chemical got on the victim's exposed skin, such as the hands : Gently and thoroughly wash the
contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds,
crevices, creases and groin. Cold water may be used. If irritation persists, seek medical attention.
Wash contaminated clothing before reusing.
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of
EYES
water for at least 15 minutes. Cold water may be used. Do not use an eye ointment. Seek medical
attention
If inhaled remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give
INHALATION
oxygen. Seek immediate medical attention.
Do not induce vomiting. Examine the lips and mouth to ascertain whether the tissues are damaged,
INGESTION
a possible indication that the toxic material was ingested; the absence of such signs, however, is
not conclusive. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not
breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
SECTION 9 - PREPARATION DATE OF M.S.D.S.
All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS) applies only to the material as packa
If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this MSDS. It shall be the us
responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this MSDS is based on technical
data judged to be reliable, Xenex Laboratories Inc. assumes no responsibility for the completeness or accuracy of the information contained herein.
PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 February 06 2007
|