Search   
MSDS 
:
 Propylamine, 98%
CAS 
:
 107-10-8
SYNONYMS 
:
 1-Aminopropane
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 107-10-8 |Propylamine | 98.0 | 203-462-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11 20/21

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation and in contact with skin.

Potential Health Effects
Eye:
Vapors may cause eye irritation. Low vapor concentrations may
cause a temporary visual disturbance known as 'blue haze' or 'halo
vision'. May cause visual disturbances. Causes severe eye
irritation and possible burns.
Skin:
Causes severe skin irritation. Harmful if absorbed through the skin.
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Harmful if inhaled. Causes severe respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Remove contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Use water spray to keep fire-exposed containers cool. Extremely
flammable liquid and vapor. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas. May be
ignited by heat, sparks, and flame. Vapors may form an explosive
mixture with air. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. For large fires,
use water spray, fog or alcohol-resistant foam. For small fires, use
carbon dioxide, dry chemical, dry sand, or alcohol-resistant foam.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition. A
vapor suppressing foam may be used to reduce vapors. Water spray may
reduce vapor but may not prevent ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 107-10-8:

Russia: 5 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: ammonia-like
pH: Not available.
Vapor Pressure: 248 mm Hg @20C
Viscosity: 0.4 MPA 20.00 deg C
Boiling Point: 48 deg C @ 760.00mm Hg
Freezing/Melting Point: - 83.00 - - 0.00 deg
Autoignition Temperature: 604 deg F ( 317.78 deg C)
Flash Point: -35 deg F ( -37.22 deg C)
Explosion Limits, lower: 2.00 vol %
Explosion Limits, upper: 10.40 vol %
Decomposition Temperature:
Solubility in water: Miscible.
Specific Gravity/Density: .7190g/cm3
Molecular Formula: C3H9N
Molecular Weight: 59.11

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, organic bases, triethynylaluminum.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 107-10-8: UH9100000
LD50/LC50:
CAS# 107-10-8: Draize test, rabbit, eye: 720 ug Severe; Inhalation,
mouse: LC50 = 2500 mg/m3/2H; Inhalation, rat: LC50 = 2310 ppm/4H;
Oral, rat: LD50 = 370 mg/kg; Skin, rabbit: LD50 = 400 mg/kg.
Carcinogenicity:
Propylamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: PROPYLAMINE
Hazard Class: 3 (8)
UN Number: 1277
Packing Group: II
IMO
Shipping Name: PROPYLAMINE
Hazard Class: 3.1 (8)
UN Number: 1277
Packing Group: II
RID/ADR
Shipping Name: PROPYLAMINE
Hazard Class: 3
UN Number: 1277
Packing group: II
USA RQ: CAS# 107-10-8: 5000 lb final RQ; 2270 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
R 20/21 Harmful by inhalation and in contact with
skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36 Wear suitable protective clothing.
WGK (Water Danger/Protection)
CAS# 107-10-8: 1
Canada
CAS# 107-10-8 is listed on Canada's DSL List.
CAS# 107-10-8 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 107-10-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/11/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Zincon, monosodium salt 62625-22-3
Propylamine, 98% 107-10-8
Phenylmercuric Acetate, 98.0-100.5% 62-38-4
Kaolin 1332-58-7
Triethyl orthoformate, 98% 122-51-0
n-Methylbenzylamine, 97% 103-67-3
Triphenylmethyl chloride 76-83-5
8-Hydroxy-1,3,6-Pyrenetrisulfonic Acid Trisodium Salt, 98% (UV-Vis) 6358-69-6
Trans-2-Aminocyclohexanol Hydrochloride, 99% 5456-63-3
Benzoin methyl ether, 96% (tlc) 3524-62-7
Heptanoic Acid, 98% 111-14-8
Diisobutylaluminum hydride(DIBAL-H), 1.0M solution in hexane 110-54-3
Diisobutylaluminum hydride (1.0M solution in toluene) 108-88-3
1-Phenyltridecane 123-02-4
Glycolic Acid, 99% 79-14-1
Phenylacetyl chloride, 98% 103-80-0
Rubidium Hydroxide, 99%, 50 wt% Solution In Water 1310-82-3
Adenosine 5'-Triphosphate, Disodium Salt Hydrate, 98%(HPLC) 987-65-5
TRICHLOROACETYL CHLORIDE, 99% 76-02-8
Silver Carbonate, 99% 534-16-7
Tetrabutylammonium Hydrogen Sulfate, 98% 32503-27-8
Adipoyl Chloride, 99+% (Titr.) 111-50-2
Benzylamine, 99% 100-46-9
1,3-Cyclopentanedione, 97% 3859-41-4
Poly(n-vinylcarbazole), secondary standard 25067-59-8
Nonanoic Acid, Tech., 90% 112-05-0
(D,L)-4-Fluoro-alpha-methylbenzylamine, 97% 403-40-7
Selenium(iv) oxide, p.a. 7446-08-4
Selenium(IV) oxide 7446-08-4
4'-Nitroacetanilide 104-04-1
Manganese(II) chloride, anhydrous 7773-01-5
Pinacolone, 96% (gc) 75-97-8
Cis-Dicyclohexano-18-Crown-6, Mixture of Syn-Cis and Anti-Cis 16069-36-6
cis-Dicyclohexano-18-crown-6, cis-anti-cis isomer, 98+% 15128-66-2
1-Nitroso-2-naphthol-3,6-disulfonic acid, disodium salt hydrate, 98% 525-05-3
2-Naphthol, 98% 135-19-3
2-Naphthol (techn) 135-19-3
3-Bromopropionic Acid, 97% 590-92-1
4'-Chloroacetophenone, 97% 99-91-2
Ethyl chloroformate, 99% 541-41-3
6-Chloro-1-Hexanol, 95% 2009-83-8
1,3-Cyclohexadiene, 96%, stabilized with 50 ppm BHT 592-57-4
N-(4-Chlorophenyl)-p-toluenesulfonamide, pract. 2903-34-6
Camphene, 80% 79-92-5
N,N'-Methylenebisacrylamide, 96% 110-26-9
3-Chlorobenzoic Acid, 99+% 535-80-8
3,5-Dimethylphenol, 98% 108-68-9
4-Chlorostyrene, stabilized with 0.1% tert-butylcatechol 98-29-3
Cyanogen Bromide, 97% 506-68-3
Tin, Powder, 99.9999% 7440-31-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net