**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 111-14-8 |Heptanoic Acid | 98 | 203-838-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of
water. Vapors may be heavier than air. They can spread along the
ground and collect in low or confined areas. Contact with metals may
evolve flammable hydrogen gas. Containers may explode when heated.
Extinguishing Media:
Water may be ineffective. Do NOT get water inside containers. For
small fires, use dry chemical, carbon dioxide, or water spray. For
large fires, use dry chemical, carbon dioxide, alcohol-resistant
foam, or water spray. Cool containers with flooding quantities of
water until well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Use with adequate ventilation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Keep away from heat, sparks
and flame. Avoid ingestion and inhalation. Discard contaminated
shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 111-14-8:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear faint yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: <0.1 mbar @ 20
Viscosity: 3.40 cP 30 deg C
Boiling Point: 223 deg C @ 760.00mm Hg
Freezing/Melting Point: -10.5 deg C
Autoignition Temperature: 289 deg C ( 552.20 deg F)
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: 1.10 vol %
Explosion Limits, upper: 10.10 vol %
Decomposition Temperature:
Solubility in water: 0.24G/100ML (15C)
Specific Gravity/Density: .9180g/cm3
Molecular Formula: C7H14O2
Molecular Weight: 130.19
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 111-14-8: MJ1575000
LD50/LC50:
CAS# 111-14-8: Oral, mouse: LD50 = 6400 mg/kg; Oral, rat: LD50 = 7
gm/kg.
Carcinogenicity:
Heptanoic Acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 111-14-8: 1
Canada
CAS# 111-14-8 is listed on Canada's DSL List.
CAS# 111-14-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 111-14-8 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Zincon, monosodium salt
| 62625-22-3 |
|
Propylamine, 98%
| 107-10-8 |
|
Phenylmercuric Acetate, 98.0-100.5%
| 62-38-4 |
|
Kaolin
| 1332-58-7 |
|
Triethyl orthoformate, 98%
| 122-51-0 |
|
n-Methylbenzylamine, 97%
| 103-67-3 |
|
Triphenylmethyl chloride
| 76-83-5 |
|
8-Hydroxy-1,3,6-Pyrenetrisulfonic Acid Trisodium Salt, 98% (UV-Vis)
| 6358-69-6 |
|
Trans-2-Aminocyclohexanol Hydrochloride, 99%
| 5456-63-3 |
|
Benzoin methyl ether, 96% (tlc)
| 3524-62-7 |
|
Heptanoic Acid, 98%
| 111-14-8 |
|
Diisobutylaluminum hydride(DIBAL-H), 1.0M solution in hexane
| 110-54-3 |
|
Diisobutylaluminum hydride (1.0M solution in toluene)
| 108-88-3 |
|
1-Phenyltridecane
| 123-02-4 |
|
Glycolic Acid, 99%
| 79-14-1 |
|
Phenylacetyl chloride, 98%
| 103-80-0 |
|
Rubidium Hydroxide, 99%, 50 wt% Solution In Water
| 1310-82-3 |
|
Adenosine 5'-Triphosphate, Disodium Salt Hydrate, 98%(HPLC)
| 987-65-5 |
|
TRICHLOROACETYL CHLORIDE, 99%
| 76-02-8 |
|
Silver Carbonate, 99%
| 534-16-7 |
|
Tetrabutylammonium Hydrogen Sulfate, 98%
| 32503-27-8 |
|
Adipoyl Chloride, 99+% (Titr.)
| 111-50-2 |
|
Benzylamine, 99%
| 100-46-9 |
|
1,3-Cyclopentanedione, 97%
| 3859-41-4 |
|
Poly(n-vinylcarbazole), secondary standard
| 25067-59-8 |
|
Nonanoic Acid, Tech., 90%
| 112-05-0 |
|
(D,L)-4-Fluoro-alpha-methylbenzylamine, 97%
| 403-40-7 |
|
Selenium(iv) oxide, p.a.
| 7446-08-4 |
|
Selenium(IV) oxide
| 7446-08-4 |
|
4'-Nitroacetanilide
| 104-04-1 |
|
Manganese(II) chloride, anhydrous
| 7773-01-5 |
|
Pinacolone, 96% (gc)
| 75-97-8 |
|
Cis-Dicyclohexano-18-Crown-6, Mixture of Syn-Cis and Anti-Cis
| 16069-36-6 |
|
cis-Dicyclohexano-18-crown-6, cis-anti-cis isomer, 98+%
| 15128-66-2 |
|
1-Nitroso-2-naphthol-3,6-disulfonic acid, disodium salt hydrate, 98%
| 525-05-3 |
|
2-Naphthol, 98%
| 135-19-3 |
|
2-Naphthol (techn)
| 135-19-3 |
|
3-Bromopropionic Acid, 97%
| 590-92-1 |
|
4'-Chloroacetophenone, 97%
| 99-91-2 |
|
Ethyl chloroformate, 99%
| 541-41-3 |
|
6-Chloro-1-Hexanol, 95%
| 2009-83-8 |
|
1,3-Cyclohexadiene, 96%, stabilized with 50 ppm BHT
| 592-57-4 |
|
N-(4-Chlorophenyl)-p-toluenesulfonamide, pract.
| 2903-34-6 |
|
Camphene, 80%
| 79-92-5 |
|
N,N'-Methylenebisacrylamide, 96%
| 110-26-9 |
|
3-Chlorobenzoic Acid, 99+%
| 535-80-8 |
|
3,5-Dimethylphenol, 98%
| 108-68-9 |
|
4-Chlorostyrene, stabilized with 0.1% tert-butylcatechol
| 98-29-3 |
|
Cyanogen Bromide, 97%
| 506-68-3 |
|
Tin, Powder, 99.9999%
| 7440-31-5 |
|
|