Search   
MSDS 
:
 Manganese(II) chloride, anhydrous
CAS 
:
 7773-01-5
SYNONYMS 
:
 Manganese chloride; Manganese dichloride; Manganous chloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7773-01-5 |Manganese(II) chloride | >97 | 231-869-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. May cause central nervous system
effects and/or neurological effects. In high doses, manganese may
increase anemia by interfering with iron absorption.
Inhalation:
May cause respiratory tract irritation. The lowest exposure
concentration of manganese at which early effects on the CNS and the
lungs may occur is still unknown. However, once neurological signs
are present, they tend to continue and worsen after exposure ends.
Chronic:
Chronic inhalation or ingestion may result in manganism
characterized by neurological symptoms such as headache, apathy, and
weakness of the legs, followed by psychosis and neurological symptoms
similar to those of Parkinson's disease. May impair fertility. Other
chronic effects from inhaling high amounts of manganese include an
increased incidence of cough and bronchitis and susceptibility to
infectious lung disease.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively. Persons with impaired
respiratory function or anemia may be at increased risk to the
hazards associated with this substance.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Substance
is noncombustible.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid breathing dust.
Storage:
Keep container closed when not in use. Store protected from
moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended
exposure limits. Facilities storing or utilizing this material should
be equipped with an eyewash facility and a safety shower.
Exposure Limits
CAS# 7773-01-5:
United Kingdom, WEL - TWA: (listed as manganese, inorganic
compounds): 0.5 mg/m3 TWA
United Kingdom, WEL - STEL: (listed as manganese, inorganic
compounds): 1.5 mg/m3 STEL
United States OSHA: 5 mg/m3 Ceiling (as Mn) (listed under Mangan
compounds, n.o.s.).
Belgium - TWA: (listed as manganese compounds, n.o.s.): 0.2 mg/m3
(as Mn)
Japan: (listed as manganese compounds, n.o.s.): 0.3 mg/m3 OEL (ex
organic compounds, as Mn)
Malaysia: (listed as manganese, inorganic compounds): 0.2 mg/m3 T
(as Mn)
Netherlands: (listed as manganese compounds, n.o.s.): 3 mg/m3 STE
(as Mn)
Netherlands: (listed as manganese compounds, n.o.s.): 1 mg/m3 MAC
Mn)
Spain: (listed as manganese, inorganic compounds): 0.2 mg/m3 VLA-
(as Mn)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: pink
Odor: odorless
pH: 5.5 (0.2M aq soln)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 1190 deg C
Freezing/Melting Point: 650 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Freely Soluble.
Specific Gravity/Density: 2.977 g/cm3
Molecular Formula: Cl2Mn
Molecular Weight: 125.84

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Deliquescent
(tending to absorb atmospheric water vapor and become liquid).
Conditions to Avoid:
Dust generation, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Zinc, potassium, sodium.
Hazardous Decomposition Products:
Hydrogen chloride, irritating and toxic fumes and gases, oxides of
manganese.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7773-01-5: OO9625000
LD50/LC50:
CAS# 7773-01-5: Oral, mouse: LD50 = 1031 mg/kg; Oral, mouse: LD50 =
450 mg/kg; Oral, rat: LD50 = 250 mg/kg.
Not available.
Carcinogenicity:
Manganese(II) chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 7773-01-5: 1
Canada
CAS# 7773-01-5 is listed on Canada's DSL List.
CAS# 7773-01-5 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7773-01-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/30/1999 Revision #3 Date: 9/02/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Zincon, monosodium salt 62625-22-3
Propylamine, 98% 107-10-8
Phenylmercuric Acetate, 98.0-100.5% 62-38-4
Kaolin 1332-58-7
Triethyl orthoformate, 98% 122-51-0
n-Methylbenzylamine, 97% 103-67-3
Triphenylmethyl chloride 76-83-5
8-Hydroxy-1,3,6-Pyrenetrisulfonic Acid Trisodium Salt, 98% (UV-Vis) 6358-69-6
Trans-2-Aminocyclohexanol Hydrochloride, 99% 5456-63-3
Benzoin methyl ether, 96% (tlc) 3524-62-7
Heptanoic Acid, 98% 111-14-8
Diisobutylaluminum hydride(DIBAL-H), 1.0M solution in hexane 110-54-3
Diisobutylaluminum hydride (1.0M solution in toluene) 108-88-3
1-Phenyltridecane 123-02-4
Glycolic Acid, 99% 79-14-1
Phenylacetyl chloride, 98% 103-80-0
Rubidium Hydroxide, 99%, 50 wt% Solution In Water 1310-82-3
Adenosine 5'-Triphosphate, Disodium Salt Hydrate, 98%(HPLC) 987-65-5
TRICHLOROACETYL CHLORIDE, 99% 76-02-8
Silver Carbonate, 99% 534-16-7
Tetrabutylammonium Hydrogen Sulfate, 98% 32503-27-8
Adipoyl Chloride, 99+% (Titr.) 111-50-2
Benzylamine, 99% 100-46-9
1,3-Cyclopentanedione, 97% 3859-41-4
Poly(n-vinylcarbazole), secondary standard 25067-59-8
Nonanoic Acid, Tech., 90% 112-05-0
(D,L)-4-Fluoro-alpha-methylbenzylamine, 97% 403-40-7
Selenium(iv) oxide, p.a. 7446-08-4
Selenium(IV) oxide 7446-08-4
4'-Nitroacetanilide 104-04-1
Manganese(II) chloride, anhydrous 7773-01-5
Pinacolone, 96% (gc) 75-97-8
Cis-Dicyclohexano-18-Crown-6, Mixture of Syn-Cis and Anti-Cis 16069-36-6
cis-Dicyclohexano-18-crown-6, cis-anti-cis isomer, 98+% 15128-66-2
1-Nitroso-2-naphthol-3,6-disulfonic acid, disodium salt hydrate, 98% 525-05-3
2-Naphthol, 98% 135-19-3
2-Naphthol (techn) 135-19-3
3-Bromopropionic Acid, 97% 590-92-1
4'-Chloroacetophenone, 97% 99-91-2
Ethyl chloroformate, 99% 541-41-3
6-Chloro-1-Hexanol, 95% 2009-83-8
1,3-Cyclohexadiene, 96%, stabilized with 50 ppm BHT 592-57-4
N-(4-Chlorophenyl)-p-toluenesulfonamide, pract. 2903-34-6
Camphene, 80% 79-92-5
N,N'-Methylenebisacrylamide, 96% 110-26-9
3-Chlorobenzoic Acid, 99+% 535-80-8
3,5-Dimethylphenol, 98% 108-68-9
4-Chlorostyrene, stabilized with 0.1% tert-butylcatechol 98-29-3
Cyanogen Bromide, 97% 506-68-3
Tin, Powder, 99.9999% 7440-31-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net