**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 76-83-5 |Triphenylmethyl chloride | >98 | 200-986-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Repeated exposure to low concentrations of HCl vapor or mist may
cause bleeding of nose and gums. Chronic bronchitis and gastritis
have also been reported.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Keep container tightly closed. Do not get on skin or in eyes. Do not
ingest or inhale. Use with adequate ventilation. Discard contaminated
shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 76-83-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: slightly yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 310 deg C
Freezing/Melting Point: 111.00 - 113.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: C19H15Cl
Molecular Weight: 278.77
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, moisture, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 76-83-5: PA6450000
LD50/LC50:
Not available.
Carcinogenicity:
Triphenylmethyl chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 76-83-5: No information available.
Canada
CAS# 76-83-5 is listed on Canada's DSL List.
CAS# 76-83-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 76-83-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/26/1998 Revision #3 Date: 1/20/2005
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Zincon, monosodium salt
| 62625-22-3 |
|
Propylamine, 98%
| 107-10-8 |
|
Phenylmercuric Acetate, 98.0-100.5%
| 62-38-4 |
|
Kaolin
| 1332-58-7 |
|
Triethyl orthoformate, 98%
| 122-51-0 |
|
n-Methylbenzylamine, 97%
| 103-67-3 |
|
Triphenylmethyl chloride
| 76-83-5 |
|
8-Hydroxy-1,3,6-Pyrenetrisulfonic Acid Trisodium Salt, 98% (UV-Vis)
| 6358-69-6 |
|
Trans-2-Aminocyclohexanol Hydrochloride, 99%
| 5456-63-3 |
|
Benzoin methyl ether, 96% (tlc)
| 3524-62-7 |
|
Heptanoic Acid, 98%
| 111-14-8 |
|
Diisobutylaluminum hydride(DIBAL-H), 1.0M solution in hexane
| 110-54-3 |
|
Diisobutylaluminum hydride (1.0M solution in toluene)
| 108-88-3 |
|
1-Phenyltridecane
| 123-02-4 |
|
Glycolic Acid, 99%
| 79-14-1 |
|
Phenylacetyl chloride, 98%
| 103-80-0 |
|
Rubidium Hydroxide, 99%, 50 wt% Solution In Water
| 1310-82-3 |
|
Adenosine 5'-Triphosphate, Disodium Salt Hydrate, 98%(HPLC)
| 987-65-5 |
|
TRICHLOROACETYL CHLORIDE, 99%
| 76-02-8 |
|
Silver Carbonate, 99%
| 534-16-7 |
|
Tetrabutylammonium Hydrogen Sulfate, 98%
| 32503-27-8 |
|
Adipoyl Chloride, 99+% (Titr.)
| 111-50-2 |
|
Benzylamine, 99%
| 100-46-9 |
|
1,3-Cyclopentanedione, 97%
| 3859-41-4 |
|
Poly(n-vinylcarbazole), secondary standard
| 25067-59-8 |
|
Nonanoic Acid, Tech., 90%
| 112-05-0 |
|
(D,L)-4-Fluoro-alpha-methylbenzylamine, 97%
| 403-40-7 |
|
Selenium(iv) oxide, p.a.
| 7446-08-4 |
|
Selenium(IV) oxide
| 7446-08-4 |
|
4'-Nitroacetanilide
| 104-04-1 |
|
Manganese(II) chloride, anhydrous
| 7773-01-5 |
|
Pinacolone, 96% (gc)
| 75-97-8 |
|
Cis-Dicyclohexano-18-Crown-6, Mixture of Syn-Cis and Anti-Cis
| 16069-36-6 |
|
cis-Dicyclohexano-18-crown-6, cis-anti-cis isomer, 98+%
| 15128-66-2 |
|
1-Nitroso-2-naphthol-3,6-disulfonic acid, disodium salt hydrate, 98%
| 525-05-3 |
|
2-Naphthol, 98%
| 135-19-3 |
|
2-Naphthol (techn)
| 135-19-3 |
|
3-Bromopropionic Acid, 97%
| 590-92-1 |
|
4'-Chloroacetophenone, 97%
| 99-91-2 |
|
Ethyl chloroformate, 99%
| 541-41-3 |
|
6-Chloro-1-Hexanol, 95%
| 2009-83-8 |
|
1,3-Cyclohexadiene, 96%, stabilized with 50 ppm BHT
| 592-57-4 |
|
N-(4-Chlorophenyl)-p-toluenesulfonamide, pract.
| 2903-34-6 |
|
Camphene, 80%
| 79-92-5 |
|
N,N'-Methylenebisacrylamide, 96%
| 110-26-9 |
|
3-Chlorobenzoic Acid, 99+%
| 535-80-8 |
|
3,5-Dimethylphenol, 98%
| 108-68-9 |
|
4-Chlorostyrene, stabilized with 0.1% tert-butylcatechol
| 98-29-3 |
|
Cyanogen Bromide, 97%
| 506-68-3 |
|
Tin, Powder, 99.9999%
| 7440-31-5 |
|
|