MATERIAL SAFETY DATA SHEET
1. General Information
Supplier拢潞 D&J Chemicals Co., Ltd.
Trade Name拢潞 D-Tartaric Acid
Molecular Formula: C4H6O6
Molecular Weight:
CAS No: 147-71-7
EINECS No: 205-695-6
Chemicalk family拢潞 Organic Chemicals
Chemical Name: D-(-)-tartaric acid
2. Physical Data Information
Appearance: WHITE CRYSTALLINE POWDER
Odor:
Solubility:
Specific Gravity: 1.76
pH: No information found.
% Volatiles by volume @ 21C (70F):
Boiling Point: 275
Melting Point: 172-174
Flash point(隆忙 ): 210
Autoignition temperature: No information found.
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
3. Hazards Identification
Emergency Overview:
WARNING! CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY
TRACT. MAY BE HARMFUL IF SWALLOWED.
D&J Chemicals Co., Ltd.
Potential Health Effects
Information on the human health effects from exposure to this substance is
limited.
Inhalation:
Inhalation of dust is irritating to the upper respiratory tract.
Ingestion:
Mildly irritating to the gastro-intestinal system if large quantities are ingested.
The effect is that of an acid, producing abdominal pain, nausea, vomiting and
diarrhea.
Skin Contact:
Causes moderate skin irritation based on Draize information for rabbits.
Eye Contact:
Mild irritant and possibly temporarily abrasive. Reddening and tearing may be
experienced.
Chronic Exposure:
No information found.
Aggravation of Pre-existing Conditions:
No information found.
4. First Aid Measures
Inhalation:
Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion:
If swallowed, give several glasses of water to drink to dilute. If large amounts
were swallowed or symptoms occur, get medical advice. Never give anything
by mouth to an unconscious person.
Skin Contact:
Wash exposed area with soap and water. Get medical advice if irritation
develops.
Eye Contact:
In case of contact, immediately flush eyes with plenty of water for at least 15
minutes, lifting upper and lower eyelids occasionally. Call a physician if
irritation persists.
5. Fire Fighting Measures
Fire:
As with most organic solids, fire is possible at elevated temperatures or by
D&J Chemicals Co., Ltd.
contact with an ignition source.
Explosion:
Fine dust dispersed in air in sufficient concentrations, and in the presence of an
ignition source is a potential dust explosion hazard.
Fire Extinguishing Media:
Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved
self-contained breathing apparatus with full facepiece operated in the pressure
demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective equipment
as specified in Section 8. Spills: Pick up and place in a suitable container for
reclamation or disposal, using a method that does not generate dust.
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect
from physical damage. Separate from oxidizing materials. Store in the dark.
Containers of this material may be hazardous when empty since they retain
product residues (dust, solids); observe all warnings and precautions listed for
the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits:
None established.
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee
exposures as low as possible. Local exhaust ventilation is generally preferred
because it can control the emissions of the contaminant at its source,
preventing dispersion of it into the general work area. Please refer to the
ACGIH document, Industrial Ventilation, A Manual of Recommended
Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
For conditions of use where exposure to dust or mist is apparent and
engineering controls are not feasible, a particulate respirator (NIOSH type N95
D&J Chemicals Co., Ltd.
or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids,
glycerine, etc.) are present, use a NIOSH type R or P filter. For emergencies or
instances where the exposure levels are not known, use a full-face
positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators
do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear protective gloves and clean body-covering clothing.
Eye Protection:
Use chemical safety goggles. Maintain eye wash fountain and quick-drench
facilities in work area
9. Stability and Reactivity
Stability:
Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products:
Carbon dioxide and carbon monoxide may form when heated to decomposition.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
Silver and silver compounds.
Conditions to Avoid:
Incompatibles.
10. Toxicology Information
May be harmful by inhalation, ingestion or skin absorption. Irritant.
IVN-MUS LD50 485 mg kg-1
Irritating to eyes.
Irritating to respiratory system.
Irritating to skin.
11. Ecological Information
Environmental Fate:
No information found.
Environmental Toxicity:
No information found.
Environmental Toxicity:
D&J Chemicals Co., Ltd.
No information found.
12. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an
appropriate and approved waste disposal facility. Processing, use or
contamination of this product may change the waste management options.
State and local disposal regulations may differ from federal disposal
regulations. Dispose of container and unused contents in accordance with
federal, state and local requirements.
13. Transport Information
Not regulated.
14. Other Information
NFPA Ratings: Health: 0 Flammability: 1 Reactivity: 0
Label Hazard Warning:
CAUTION! MAY CAUSE IRRITATION TO SKIN AND EYES.
Label Precautions:
Avoid contact with eyes.
Wash thoroughly after handling.
Avoid breathing dust.
Keep container closed.
Use with adequate ventilation.
Label First Aid:
In case of contact, immediately flush eyes or skin with plenty of water for at
least 15 minutes. Get medical attention if irritation develops or persists.
Product Use:
Laboratory Reagent.
Revision Information:
MSDS Section(s) changed since last revision of document include: 8.
Disclaimer:
The information above is believed to be accurate. However, we make no
warranty of merchantability or any other warranty, express or implied, with
respect to such information, and we assume no liability resulting from its use.
Users should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be liable
D&J Chemicals Co., Ltd.
for any claims, losses, of damages of any third party or for lost profits or any
special, indirect, incidental, consequential or exemplary damages, even if the
company has been advised of the possibility of such damages.
D&J Chemicals Co., Ltd.
|