Material Safety Data Sheet
Page 1 of 6 Issue date: March 2005
M-LINE 1240 FPA SILVER SOLDER PASTE
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Davidson Measurement Pty. Ltd
ACN: 005 031 961 ABN: 29 005 031 961
Phone: 03 9580 4366
Fax: 03 9580 6499
Email: info@davidson.com.au
Web: www.davidson.com.au
Address: 1-3 Lakewood Boulevard,
Braeside, Victoria, 3195.
Product Name: M -LINE 1240 FPA SILVER SOLDER PASTE
Manufacturer's Product Code: MGM037E
Use: For very high temperature solder joints, generally with WK-Series strain gauges . The WRS-1 Resistance soldering
unit is an ideal tool for use with this solder.
2. HAZARDS IDENTIFICATION
HAZARDOUS ACCORDING TO EU CRITERIA
Hazard Category: Harmful (Xn), Corrosive (C)
Hazard Classification: HAZARDOUS SUBSTANCE, DANGEROUS GOOD
RISK PHRASES
R22 Harmful if swallowed.
R34 Causes burns.
SAFETY PHRASES
S2 Keep out of reach of children.
S20 When using, do not eat or drink.
S24/25 Avoid contact with skin and eyes.
S38 In case of insufficient ventilation, wear suitable respiratory protection.
S45 In case of accident or if you feel unwell, contact a doctor or Poisons Information Centre immediately and show
this container or label.
S62 If swallowed, do not induce vomiting; Seek medical advice immediately and show this container or label.
UN Number: 1759
Proper Shipping Name: CORROSIVE SOLID, N.O.S.(Contains POTASSIUM FLUOROBORATE)
Dangerous Goods Class: 8
Packing Group: III
Poison Schedule: S6 [Aust]
This material is a Scheduled S6 Poison and must be stored, handled and used according to the appropriate regulations.
Warning Statement:
Corrosive and combustible material. Avoid contact by skin, eyes and by inhalation.
3. COMPOSITION / INFORMATION ON INGREDIENTS
SUBSTANCE NAME Proportion CAS Number
POTASSIUM FLUOROBORATE 30 to 60 % 14075-53-7
SILVER 10 to 30 % 7440-22-4
COPPER 10 to 30 % 7440-50-8
ZINC METAL 10 to 30 % 7733-02-0
NICKEL METAL NOT PYROPHORIC OR CATALYTIC 1 to 5 % Mixture
SOLVENT NON HAZARDOUS 1 to 10 % Proprietary
All other ingredients not hazardous according to EU Criteria.
Material Safety Data Sheet
Page 2 of 6 Issue date: March 2005
M-LINE 1240 FPA SILVER SOLDER PASTE
4. FIRST AID MEASURES
Swallowed:
If swallowed, DO NOT induce vomiting. Wash mouth out with water. If victim is fully conscious, give 1 - 2 glasses of
water to drink. Immediately transport to hospital or doctor.
Eye:
If dust enters the eyes, flush with plenty of water for at least 15 minutes, ensuring eye lids are held open. Immediately
transport to hospital or doctor.
Skin:
If dust is falls onto the skin, remove any contaminated clothing and wash skin thoroughly with soap and water. If
irritation persists seek urgent medical assistance.
Inhaled:
Remove victim to fresh air. Do not use mouth-to-mouth method if victim inhaled the substance; induce artificial
respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Administer oxygen if breathing is difficult.
First Aid Facilities:
Eye wash fountain, safety shower and normal wash room facilities.
Advice to Doctor:
Treat symptomatically.
In case of poisoning, contact Poisons Information Centre
In Australia call Tel: 131126
In New Zealand Tel: 034747000
5. FIRE-FIGHTING MEASURES
Fire/Explosion Hazard
SUITABLE EXTINGUISHING MEDIA: Foam, dry chemical or carbon dioxide.
HAZARDS FROM COMBUSTION PRODUCTS: Fluorine entities, oxides of carbon, zinc oxide fume and noxious
smoke.
PRECAUTIONS FOR FIRE FIGHTERS AND SPECIAL PROTECTIVE EQUIPMENT: Self-contained
breathing apparatus (SCBA) required for fire -fighting personnel. If possible to do so safely, shut off fuel to fire. Avoid
spreading burning liquid with water used for cooling fire exposed containers when using water spray, boil-over may
occur when the product temperature reaches the boiling point of water, thereby resulting in re-ignition.
HAZCHEM CODE: 2W [Aust]
FLAMMABILITY
This material is a combustible paste. However, it does not met the criteria of being a flammable solid according to the
dangerous goods code.
6. ACCIDENTAL RELEASE MEASURES
Emergency Procedures:
Caution! This product is a corrosive and combustible material. Avoid generating dusts. Keep unnecessary people away;
Isolate hazard area and deny entry. If possible wet area down to prevent high dust levels. Wear protective equipment to
prevent skin and eye contact, as outlined under personal protection in this MSDS.
Methods and Materials for Containment and Clean Up Procedures:
Immediately throw diatamaceous earth (or other inert material) on top of the spill. If available, use dustless methods,
such as a HEPA vacuum and filter. Otherwise, use a non-sparking shovel and shovel into a suitably labeled container
for later disposal. Do not dry sweep.
Material Safety Data Sheet
Page 3 of 6 Issue date: March 2005
M-LINE 1240 FPA SILVER SOLDER PASTE
6. ACCIDENTAL RELEASE MEASURES (Continued)
Emergency information(Transport):
Dangerous Goods - Initial Emergency Response Guide (SAA/SNZ HB76:1997)
For TOXIC AND/OR CORROSIVE SUBSTANCES Guide No: 36
7. HANDLING AND STORAGE
Precautions for Safe Handling:
Store in a cool place and out of direct sunlight. Store away from sources of ignition and naked flames. Store away from
incompatibles (see Section 10 for further details). For further information please refer to the Engineering Controls of
this MSDS.
Conditions for Safe Storage:
Keep containers tightly closed, when not using this product. Store at ambient temperatures 13 - 248 C. Store in original
packages as approved by manufacturer.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Standards
No exposure standards are available for this product, however, the following exposure standards have been assigned by
[NOHSC] to the following components of the product:
POTASSIUM FLUOROBORATE
[NOHSC]
[TWA]2.5 mg/m3
Based upon fluoride content.
SILVER
[NOHSC]
[TWA]0.1 mg/m3
References: H
COPPER
[NOHSC]
[TWA]0.2 mg/m3
NICKEL, Not specified
[NOHSC]
3
[TWA] 1 mg/m
Notices: H;R
Engineering Controls
Corrosive solid. Maintain adequate ventilation at all times.
Personal Protection Equipment
GLOVES: Nitrile or neoprene.
EYES: Chemical goggles or spectacles with side shields to protect eyes.
RESPIRATORY PROTECTION: Avoid breathing of dusts. The use of a respirator is required, particularly, if high dust
levels are present, then the use of a suitable dust mask or half-face respirator fitted with a P1 filter is recommended. All
respirators must comply with AS/NZS 1715 and AS/NZS 1716.
Material Safety Data Sheet
Page 4 of 6 Issue date: March 2005
M-LINE 1240 FPA SILVER SOLDER PASTE
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Tan paste with a sweet odour.
Boiling Point: Not available.
Vapour Pressure: < 50 mmHg @ 38掳C (Solvent only)
Specific Gravity: > 2.0
Flash Point: > 60.0掳C (Solvent only)
Flammability Limits: Not available.
Solubility in Water: Immiscible.
Other Properties
Vapor Density (Air = 1): > 5 (For solvent)
Evaporation Rate (BuAc = 1): < 1 (For solvent)
Volatile Organic Compounds : < 3 % (For solvent)
10. STABILITY AND REACTIVITY
CHEMICAL STABILITY:
Stable under normal conditions of use.
CONDITIONS TO AVOID:
Ignition sources and mixing with incompatibles.
INCOMPATIBLE MATERIALS:
Strong mineral acids (sulfuric, nitric and hydrochloric), and oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS:
Fluorine entities, oxides of carbon, zinc o xide fume and noxious smoke.
HAZARDOUS REACTIONS:
Will not occur.
11. TOXICOLOGICAL INFORMATION
ACUTE HEALTH EFFECTS:
Swallowed:
Harmful if swallowed. Will cause burns to the mouth, mucous membranes, throat, oesophagus and stomach. If
sufficient quantities are ingested (swallowed) death may occur.
Eye:
Will cause burns to the eyes with effects including: Pain, tearing, conjunctivitis and if duration of exposure is long
enough, blindness will occur.
Skin:
Will cause burns to the skin, with effects including; Redness, blistering, localised pain and dermatitis.
Inhaled:
Under ambient conditions the solvent does not typically pose an inhalation problem. Under elevated temperatures it
could cause nasal and respiratory irritation, dizziness, weakness, fatigue, nausea, headache, possible unconsciousness,
and even asphyxiation. Brazing fumes can contain fluorides which irritate the eyes, nose and throat. Oxides of carbon
are produced can be fatal (in an area of limited or no ventilation). Fumes of copper and zinc may cause metal fume
fever with flu-like symptoms and skin and hair discolouration. Onset of symptoms may be delayed 4 to 12 hours, and
go away after 24 to48 hours and leave no lasting effect. Argyria, a blue-gray discolouration of the skin, mucous
membranes and eyes may result from the inhalation of silver. This discolouration may become permanent. Generally
nickel does not cause systemic poisoning, but nickel has been identified as a suspected carcinogen. There may be
adverse effects to the lungs and nasal cavities.
Material Safety Data Sheet
Page 5 of 6 Issue date: March 2005
M-LINE 1240 FPA SILVER SOLDER PASTE
11. TOXICOLOGICAL INFORMATION (Continued)
Chronic:
Prolonged or repeated exposure may lead to irreversible damage to health. Prolonged or repeated skin contact will lead
to necrosis (death) of the skin.
Fluorosis may occur which is characterized by increased density of the bone. Fluoride may also deposit in tendons,
ligaments and muscles. Such deposition may result in crippling effects. Mottling of teeth is also common.
12. ECOLOGICAL INFORMATION
No information is available for this product, however, large quantities should not be discharged to waterways, sewers or
drains.
13. DISPOSAL CONSIDERATIONS
Refer to appropriate authority in your State. Dispose of material through a licensed waste contractor. Advise corrosive
and combustible nature. If large amounts of the product enter waterways, sewers or streams, immediately contact the
Environmental Protection Agency or your Local Waste Management Authority.
14. TRANSPORT INFORMATION
Road Transport
UN Number: 1759
Proper Shipping Name: CORROSIVE SOLID, N.O.S.(Contains POTASSIUM FLUOROBORATE)
Dangerous Goods Class: 8
Packing Group: III
Label: Harmful (Xn), Corrosive (C)
Air Transport
UN Number: 1759
Proper Shipping Name: CORROSIVE SOLID, N.O.S.(Contains POTASSIUM FLUOROBORATE)
Dangerous Goods Class: 8
Packing Group: III
Label: Harmful (Xn), Corrosive (C)
Sea Transport
UN Number: 1759
Proper Shipping Name: CORROSIVE SOLID, N.O.S.(Contains POTASSIUM FLUOROBORATE)
Dangerous Goods Class: 8
Packing Group: III
Label: Harmful (Xn), Corrosive (C)
15. REGULATORY INFORMATION
Poison Schedule: S6 [Aust]
This material is a Scheduled S6 Poison and must be stored, handled and used according to the appropriate regulations.
Inventory Status:
Australia (AICS) Y
United States (TSCA) Y
Europe (EINECS/ELINCS) Y
Y = all ingredients are on the inventory.
Material Safety Data Sheet
Page 6 of 6 Issue date: March 2005
M-LINE 1240 FPA SILVER SOLDER PASTE
16. OTHER INFORMATION
Date of Preparation:
Issue date: March 01, 2005 Supercedes: Arpil 10 , 2000
Reasons for Update:
nd
1. Alignment with the 2 Edition of National Code of Practice for the Preparation of Material Safety Data Sheets
[NOHSC:2001(2003)].
2. Changes and /or addition made to all sections.
Key Legend Information:
NOHSC - National Occupational Health & Safety Commission [Aust]
SUSDP - Standard for the Uniform Scheduling of Drugs and Poisons [Aust]
TWA - Time Weighted Average [Int]
STEL - Short Term Exposure Limit [Int]
AICS - Australian Inventory of Chemical Substances
EPA - Environmental Protection Agency [Int]
NIOSH - National Institute for Occupational Safety and Health [US]
AS/NZS 1715 - Selection, use and maintenance of respiratory protective devices. [Aust/NZ]
AS/NZS 1716 - Respiratory protective devices. [Aust/NZ]
(SAA/SNZ HB76:1997) - Dangerous Goods - Initial Emergency Response Guide [Aust/NZ]
AS 1940 - The Storage and Handling of Flammable and Combustible Liquids [Aust]
Hazchem Code: Designation for fire fighters [Aust]
IATA - International Aviation Transport Authority [Int]
ICAO - International Civil Aviation Organization [Int]
IMO - International Maritime Organisation. [Int]
IMDG - International Maritime Dangerous Goods [Int]
United Nations Recommendations for the Transport of Dangerous Goods and Globally Harmonized System for the
classification and labelling of Chemicals. [Int]
EU - European Union [Int]
[Aust/NZ] = Australian/New Zealand
[Int] = International
[US] = United States of America
Principal References:
Information supplied by manufacturer.
Disclaimer
To the best of our knowledge, the information provided above meets the requirements of European Union directives for
hazardous substances which have been tested as a whole. The data provided on this Material Safety Data Sheet is from
manufacturers of the original components. All animal test data has been obtained from the public domain, NO
ANIMAL TESTS have been conducted by Davidson Pty Ltd. Davidson Pty Ltd specifically disclaims any and all form
of liability and/or responsibility for the application of this product.
END of MSDS
|