MATERIAL SAFETY DATA SHEET
GLANCE HC
HMIS NFPA Personal protective equipment
Health 3 3
Fire Hazard 0 0
Reactivity 0 0
Version Number: 1 Preparation date: 2006-03-02
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: GLANCE HC
MSDS #: 114701001
Product code: 114701X, 114701001, 04967, 05779, A706, 3063402, 3165337, 3111144
Recommended use: Cleaning product. This product is intended to be diluted prior to use.
Manufacturer, importer, supplier:
US Headquarters Canadian Headquarters
JohnsonDiversey, Inc. JohnsonDiversey - Canada, Inc.
8310 16th St. 2401 Bristol Circle
Sturtevant, Wisconsin 53177-0902 Oakville, Ontario L6H 6P1
Phone: 1-888-352-2249 Phone: 1-800-668-3131
MSDS Internet Address:
www.johnsondiversey.com
Emergency telephone number: 1-800-851-7145 (Prosar); 1-651-917-6133 (Int'l Prosar); 01-800-710-3400 (M茅xico)
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
DANGER. CORROSIVE. CAUSES SKIN AND EYE BURNS. HARMFUL OR FATAL IF SWALLOWED.
Principle routes of exposure: Eye contact. Skin contact. Inhalation.
Eye contact: Corrosive. Causes permanent eye damage, including blindness.
Skin contact: Corrosive. Causes permanent damage .
Inhalation: May cause irritation and corrosive effects to nose, throat and respiratory tract.
Ingestion: Corrosive. Causes burns to mouth, throat and stomach.
3. COMPOSITION/INFORMATION ON INGREDIENTS
HAZARDOUS COMPONENTS
Ingredient(s) CAS # Weight % LD50 Oral LD50 Dermal LC50 Inhalation
Ammonium hydroxide 1336-21-6 1 - 5% 350 mg/kg (rat) Not available Not available
3900 mg/m3/1H (rat)
Sodium lauryl sulfate 151-21-3 5 - 10% 1288 mg/kg (rat) Not available
2-butoxyethanol 111-76-2 40 - 50% 470 mg/kg (rat) 220 mg/kg (rabbit) 450 ppm (rat)
4. FIRST AID MEASURES
Eye contact: Immediately flush eyes with running water for at least 15-20 minutes, keeping eyelids open. Get medical
attention immediately.
Skin contact: Flush immediately with plenty of water for at least 15-20 minutes. Get medical attention immediately.
Inhalation: If breathing is affected, remove to fresh air. Get medical attention immediately.
Ingestion: If swallowed, give a cupful of water or milk. THEN IMMEDIATELY CONTACT A PHYSICIAN OR POISON
CENTER. DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person.
Aggravated Medical Conditions: Persons with pre-existing skin disorders may be more susceptable to irritating effects
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media: The product is not flammable. Extinguish fire using agent suitable for surrounding fire .
Specific hazards: Not applicable
Unusual hazards: Corrosive material (See sections 8 and 10).
Specific methods: No special methods required
Special protective equipment for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or
equivalent) and full protective gear
Extinguishing media which must not be used for safety reasons: No information available
GLANCE HC 1 of 3
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Use personal protective equipment
Environmental precautions Clean-up methods - large spillage. Prevent product from entering drains. Absorb spill with inert material
and clean-up methods: (e.g. dry sand or earth), then place in a chemical waste container. Use a water rinse for final clean-up.
7. HANDLING AND STORAGE
Handling:
Avoid contact with skin, eyes and clothing. Do not taste or swallow. Avoid breathing vapors or mists. Use only with adequate ventilation. Remove and
wash contaminated clothing and footwear before re-use. Wash thoroughly after handling. Product residue may remain on/in empty containers. All
precautions for handling the product must be used in handling the empty container and residue. FOR COMMERCIAL AND INDUSTRIAL USE ONLY.
Storage:
Protect from freezing. Keep tightly closed in a dry, cool and well-ventilated place. KEEP OUT OF THE REACH OF CHILDREN.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures to reduce exposure:
Good general ventilation should be sufficient to control airborne levels. Respiratory protection is not required if good ventilation is maintained.
Personal Protective Equipment
Eye protection: Chemical splash goggles.
Hand protection: Chemical resistant gloves
Skin and body protection: Protective footwear. If major exposure is possible, wear suitable protective clothing and footwear.
Respiratory protection: In case of insufficient ventilation wear suitable respiratory equipment. A respiratory protection program that
meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace
conditions warrant a respirator's use.
Hygiene measures: Handle in accordance with good industrial hygiene and safety practice
Ingredient(s) CAS # ACGIH OSHA Mexico
2-butoxyethanol 111-76-2 20 ppm (TWA) Skin 75 ppm (STEL)
240 mg/m3 (TWA) 360 mg/m3 (STEL)
120 mg/m3 (TWA)
50 ppm (TWA)
26 ppm (TWA)
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid Bulk density: 8.20
pH: 12.4 Dilution pH: 12.1
Appearance: Liquid Vapor density: No information available
Color: Clear Blue Evaporation rate: No information available
Odor: Ammoniacal Boiling point/range: Not determined
Specific gravity: 0.9826 Melting point/range: Not determined
Density: 0.9826 Decomposition temperature: Not determined
VOC: 40 Autoignition temperature: No information available
Flash point: >200 (掳F) >93.3 (掳C) Viscosity: No information available
Solubility: Easily soluble Partition coefficient (n-octanol/water): No information available
Solubility in other solvents: No information available
Elemental Phosphorous: 0
10. STABILITY AND REACTIVITY
Stability: Yes.
Polymerization: No.
Hazardous decomposition products: None reasonably foreseeable.
Materials to avoid: Acids.
11. TOXICOLOGICAL INFORMATION
Acute toxicity Corrosive Oral LD50 estimated to be between 500 - 2000 mg/kg
Component Information: See Section 3
Chronic toxicity: None known
Specific effects
Carcinogenic effects: None known
Mutagenic effects: None known
GLANCE HC 2 of 3
Reproductive toxicity: None known
Target organ effects: None known
12. ECOLOGICAL INFORMATION
Environmental Information: No data available
13. DISPOSAL CONSIDERATIONS
Waste from residues / unused products:
Dispose of according to all federal, state and local applicable regulations
14. TRANSPORT INFORMATION
DOT/TDG: Please refer to the Bill of Lading/receiving documents for up to date shipping information
15. REGULATORY INFORMATION
International Inventories
All components of this product are listed on the following inventories: U.S.A. (TSCA), Canada (DSL/NDSL).
U.S. Regulations
California Proposition 65: This product is not subject to the reporting requirements under California's Proposition 65
STATE RIGHT TO KNOW
Ingredient(s) CAS # MARTK: NJRTK: PARTK: RIRTK:
Water 7732-18-5 - - - -
Ammonium hydroxide 1336-21-6 X X - -
Sodium lauryl sulfate 151-21-3 - - - -
Sodium xylene sulfonate 1300-72-7 - - - -
2-butoxyethanol 111-76-2 X X X X
CERCLA / SARA
Ingredient(s) CAS # Weight % CERCLA/SARA RQ (lbs) Section 302 TPQ (lbs) Section 313
Ammonium hydroxide 1336-21-6 1 - 5% 1000
2-butoxyethanol 111-76-2 40 - 50% X
Ingredient(s) CAA HAP CAA ODS CWA Priority Pollutants
2-butoxyethanol X
SARA 311/312 Hazard Categories
Immediate: y
Canada
WHMIS hazard class: E Corrosive material .
Ingredient(s) CAS # NPRI
2-butoxyethanol 111-76-2 X
16. OTHER INFORMATION
Reason for revision: Not applicable
Prepared by: NAPRAC
Additional advice: None
Notice to Reader: This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty, express
or implied, as to the accuracy of the information contained within. Actual conditions of use and handling are beyond seller's control. User is responsible
to evaluate all available information when using product for any particular use and to comply with all Federal, State, Provincial and Local laws and
regulations.
GLANCE HC 3 of 3
|