|-------------------------------------------------------|
| MATERIAL SAFETY DATA SHET |
|-------------------------------------------------------|
|-------------------------------------------------------------------------|
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
|-------------------------------------------------------------------------|
PRODUCT NAME : WOOD FINISH REPAIR KIT STAIN PENS-ALL COLORS
UPC NUMBER : 7079897500
PRODUCT USE/CLASS : Wood Stain
MANUFACTURER: 24 HOUR EMERGENCY:
DAP INC. TRANSPORTATION: 1-800-535-5053
2400 BOSTON ST. MEDICAL : 1-800-327-3874
BALTIMORE, MD 21224
PREPARE DATE : 02/03/1999 GENERAL INFORMATION:
REVISION NO. : 3 DAP INC.: 1-800-543-3840
REVISION DATE: 11/01/2002
|-------------------------------------------------------------------------|
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
|-------------------------------------------------------------------------|
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER RANGE
---------------------------------------------------------------------------
01 Ethanol 67-17-5 50.0-60.0 %
02 2-Propanol, 1 ethoxy 1569-02-4 1.0-10.0 %
03 n-Propyl acetate 109-60-4 1.0-10.0 %
04 Dipropylene glycol monomethyl ether 34590-94-8 1.0-10.0 %
05 Isopropanol 67-63-0 0.0-1.0 %
06 Chromium 7440-47-3 0.0-1.0 %
07 Cobalt compounds 7440-48-4 0.0-1.0 %
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
01 1000 ppm N.E. 1000 ppm N.E. N.E. NO
02 N.E. N.E. N.E. N.E. N.E. NO
03 200 ppm 250 ppm 200 ppm N.E. N.E. NO
04 N.E. N.E. N.E. N.E. N.E. NO
05 400 ppm 500 ppm 400 ppm N.E. N.E. NO
06 0.05 mg/m3 N.E. 0.5 mg/m3 N.E. N.E. NO
07 0.02 mg/m3 N.E. 0.1 mg/m3 N.E N.E. NO
Remaining ingredients are not considered hazardous per the OSHA Hazard
Communication Standard.
Listed Permissible Exposure Levels (PEL) are from the U.S. Dept. of Labor
OSHA Final Rule Limits (CFR 29 1910.1000); limits may vary between states.
(Continued on Page 2)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT STAIN PENS-ALL COLORS
Revision Date: 11/01/2020 Page 2
|-------------------------------------------------------------------------|
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
|-------------------------------------------------------------------------|
|-------------------------------------------------------------------------|
| SECTION 3 - HAZARDS IDENTIFICATION |
|-------------------------------------------------------------------------|
EMERGENCY OVERVIEW: DANGER! Flammable liquid and vapor. Vapor harmful.
Harmful or fatal if swallowed. Vapors may cause flash fire or explosion.
Harmful if inhaled. Harmful if swallowed.
POTENTIAL HEALTH EFFECTS:
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Contact with the eyes may cause
moderate to severe eye injury. Eye contact may result in tearing and
reddening, but not likely to permanently injure eye tissue. Temporary
vision impairment, cloudy or blurred vision, is possible
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: May cause skin irritation or
sensitization. Prolonged or repeated contact can result in defatting and
drying of the skin which may result in skin irritation and dermatitis
(rash).
EFFECTS OF OVEREXPOSURE - INHALATION: Vapor harmful if inhaled. Irritates
nose and upper respiratory tract. Irritation may be delayed for several
hours. Vapor inhalation may affect the brain or nervous system causing
dizziness, headache or nausea. May effect the blood, liver and reproductive
system. Intentional misuse by deliberately concentrating and inhaling
vapors may be harmful or fatal.
EFFECTS OF OVEREXPOSURE - INGESTION: Irritating to mouth, throat and
stomach. Can cause abdominal discomfort, nausea, vomiting and diarrhea.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Prolonged or repeated skin
contact may cause irritation. Prolonged skin contact can cause reddening,
swelling rash scaling or blistering. May cause skin sensitization.
MEDICAL CONDITIONS WHICH MAY BE AGGRAVATED BY CONTACT: Liver disease. Skin
disease including eczema and sensitization. Respiratory disease including
asthma and bronchitis. Pre-existing eye skin and respiratory disorders may
be aggravated by exposure to this product.
PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT INHALATION
|-------------------------------------------------------------------------|
| SECTION 4 - FIRST AID MEASURES |
|-------------------------------------------------------------------------|
EYE CONTACT: Flush with large quantities of water for at least 15 minutes
until irritation subsides. Contact a physician.
SKIN CONTACT: Wash with soap and water.
INHALATION: Remove to fresh air.
(Continued on Page 3)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT STAIN PENS-ALL COLORS
Revision Date: 11/01/2020 Page 3
|-------------------------------------------------------------------------|
| SECTION 4 - FIRST AID MEASURES |
|-------------------------------------------------------------------------|
INGESTION: DO NOT INDUCE VOMITING. If irritation or complications arise,
contact a physician or Regional Poison Control Center immediately.
COMMENTS: Call 1-800-327-3874 if irritation or complications arise from
any of the above exposures.
|-------------------------------------------------------------------------|
| SECTION 5 - FIRE FIGHTING MEASURES |
|-------------------------------------------------------------------------|
FLASH POINT: <100 F LOWER EXPLOSIVE LIMIT: N.A.
(SETAFLASH CLOSED CUP) UPPER EXPLOSIVE LIMIT: N.A.
AUTOIGNITION TEMPERATURE: N.E.
EXTINGUISHING MEDIA: CO2 DRY CHEMICAL FOAM
UNUSUAL FIRE AND EXPLOSION HAZARDS: Extremely flammable. Material will
readily ignite at room temperature. Vapors may form an explosive mixture
with air. Vapors can travel long distances to a source of ignition and
flashback. Containers may explode if exposed to extreme heat. Eliminate
sources of ignition: heat, electrical equipment, sparks, and flames. Do
not put in contact with oxidizing or caustic materials.
SPECIAL FIREFIGHTING PROCEDURES: Full protective equipment, including
self-contained breathing apparatus, is recommended to protect from
combustion products. Cool exposed containers with water.
|-------------------------------------------------------------------------|
| SECTION 6 - ACCIDENTAL RELEASE MEASURES |
|-------------------------------------------------------------------------|
SPILL OR LEAK PROCEDURES: Dike spill area. Immediately eliminate sources
of ignition. Use absorbent material or scrape up dried material and place
into containers.
|-------------------------------------------------------------------------|
| SECTION 7 - HANDLING AND STORAGE |
|-------------------------------------------------------------------------|
HANDLING INFORMATION: KEEP OUT OF REACH OF CHILDREN. Avoid skin and eye
contact. Avoid breathing vapors. Use only in a well ventilated area.
STORAGE INFORMATION: Store away from caustics and oxidizers. Keep away
from heat, spark, and flame. Keep containers tightly closed when not in
use. Keep containers from excessive heat and freezing. Do not store at
temperatures above 120 degrees F.
(Continued on Page 4)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT STAIN PENS-ALL COLORS
Revision Date: 11/01/2020 Page 4
|-------------------------------------------------------------------------|
| SECTION 7 - HANDLING AND STORAGE |
|-------------------------------------------------------------------------|
OTHER PRECAUTIONS: Intentional misuse by deliberately concentrating and
inhaling vapors may be harmful or fatal. Do not take internally.
Construction and repair activities can adversely affect indoor air quality.
Consult with the occupants or other appropriate representative (i.e.
maintenance, building manager, industrial hygienist, or safety officer) to
determine ways to minimize any impact.
|-------------------------------------------------------------------------|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|-------------------------------------------------------------------------|
ENGINEERING CONTROLS: Provide sufficient mechanical ventilation (local or
general exhaust) to maintain exposure below PEL and TLV. Vapors are
heavier than air and will collect in low areas. Check all low areas
(basements, sumps, etc.) for vapors before entering.
RESPIRATORY PROTECTION: If 8 hour exposure limit or value is exceeded for
any component, use an approved NIOSH/OSHA respirator. Consult your safety
equipment supplier and the OSHA regulation, 29 CFR 1910.134 for respirator
requirements. A respiratory protection program that meets OSHA 1910.134 and
ANSI Z88.2 requirements must be followed whenever workplace conditions
warrant a respirator's use.
EYE PROTECTION: Goggles or safety glasses with side shields.
SKIN PROTECTION: Solvent impervious gloves.
OTHER PROTECTIVE EQUIPMENT: Provide eyewash and solvent impervious apron
if body contact may occur.
HYGIENIC PRACTICES: Remove contaminated clothing and wash before reuse.
|-------------------------------------------------------------------------|
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
|-------------------------------------------------------------------------|
BOILING RANGE : N.E.
ODOR : Moderately strong alcohol
APPEARANCE : Colored liquid EVAPORATION RATE: Is faster than Butyl
SOLUBILITY IN H2O : Negligible Acetate
SPECIFIC GRAVITY : 0.88
VAPOR PRESSURE : 97 mm Hg
PHYSICAL STATE : Liquid
(See Section 16 for abbreviation legend)
|-------------------------------------------------------------------------|
| SECTION 10 - STABILITY AND REACTIVITY |
|-------------------------------------------------------------------------|
(Continued on Page 5)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT STAIN PENS-ALL COLORS
Revision Date: 11/01/2020 Page 5
|-------------------------------------------------------------------------|
| SECTION 10 - STABILITY AND REACTIVITY |
|-------------------------------------------------------------------------|
CONDITIONS TO AVOID: Excessive heat and freezing.
INCOMPATIBILITY: Strong oxidizers and caustics.
HAZARDOUS DECOMPOSITION PRODUCTS: Normal decomposition products, i.e. COx,
NOx
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
|-------------------------------------------------------------------------|
| SECTION 11 - TOXICOLOGICAL PROPERTIES |
|-------------------------------------------------------------------------|
Chemical Name CAS Number LD50/LC50
Ethyl alcohol 64-17-5 Inhalation LC50 Rat: 20,000 ppm/10H.
Inhalation LC50 Mouse: 39gm/m3/10H.
Oral LD50 Rat: 7060 mg/kg. Oral LD50
Mouse: 3450mg/kg.
2-Prpanol, 2 ethoxy 1569-02-4 Inhalation LC50 Rat: >10,000 ppm/4h.
Oral LD50 Rat: 4,400 mg/kg. Dermal
LD50: 8,100 mg/kg.
n-Propyl acetate 109-60-4 Oral LD50 Rat: 9370 mg/kg. Oral LD50
Mouse: 8,300 mg/kg. Dermal LD50
Rabbit >20ml/kg.
Dipropylene glycol 34590-94-8 Oral LD50 Rat: 5,400 uL/kg. Dermal
LD50 Rabbit: 10ml/kg.
Isopropyl alcohol 67-63-0 Ihalation LC50 Rat: 16,000 ppm/8H.
Oral LD50 Rat: 5045 mg/kg. Oral LD50
Mouse: 3,600mg/kg. Dermal LD50
Rabbit
12,800 mg/kg.
Cobalt 7440-48-4 Oral LD50 Rat: 6171 mg/kg.
|-------------------------------------------------------------------------|
| SECTION 12 - ECOLOGICAL INFORMATION |
|-------------------------------------------------------------------------|
No product or component ecological information is available.
|-------------------------------------------------------------------------|
| SECTION 13 - DISPOSAL CONSIDERATIONS |
|-------------------------------------------------------------------------|
(Continued on Page 6)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT STAIN PENS-ALL COLORS
Revision Date: 11/01/2020 Page 6
|-------------------------------------------------------------------------|
| SECTION 13 - DISPOSAL CONSIDERATIONS |
|-------------------------------------------------------------------------|
WASTE MANAGEMENT/DISPOSAL: Dispose of according to Federal, State, and
Local Standards. Discarded material should be incinerated at a permitted
facility. Liquids cannot be disposed of in a landfill. Do not reuse empty
container. State and Local regulations/restrictions are complex and may
differ from Federal regulations. Responsibility for proper waste disposal
is with the owner of the waste.
EPA WASTE CODE 没 None.
|-------------------------------------------------------------------------|
| SECTION 14 - TRANSPORTATION INFORMATION |
|-------------------------------------------------------------------------|
DOT PROPER SHIPPING NAME: Not regulated by DOT.
DOT HAZARD CLASS: N.A.
DOT UN/NA NUMBER: N.A. PACKING GROUP: N.A.
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME ----------- CAS NUMBER
Isopropanol 67-63-0
Cobalt 7440-48-4
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:
----------- CHEMICAL NAME ----------- CAS NUMBER
None
(Continued on Page 7)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT STAIN PENS-ALL COLORS
Revision Date: 11/01/2020 Page 7
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME ----------- CAS NUMBER
Polyketone resin Contents partially unknown
Dye Contents partially unknown
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
Polyketone resin Proprietary
Dye Proprietary
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer, birth defects or other
reproductive harm:
----------- CHEMICAL NAME ----------- CAS NUMBER
Cobalt 7440-48-4
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: No information available.
|-------------------------------------------------------------------------|
| SECTION 16 - OTHER INFORMATION |
|-------------------------------------------------------------------------|
HMIS RATINGS - HEALTH: 1 FLAMMABILITY: 3 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 07/07/1998
REASON FOR REVISION: Section 1. Change name and address of manufacturer
Change emergency phone numbers.
Section 3. Update hazard information.
Section 15. Update regulatory information.
VOC less water, less exempt solvent: 710-720 gm/l
(Continued on Page 8)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT STAIN PENS-ALL COLORS
Revision Date: 11/01/2020 Page 8
|-------------------------------------------------------------------------|
| SECTION 16 - OTHER INFORMATION |
|-------------------------------------------------------------------------|
LEGEND: ACGIH - AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
N.A. - NOT APPLICABLE
N.E. - NOT ESTABLISHED
PEL - PERMISSIBLE EXPOSURE LIMIT
NTP - NATIONAL TOXICOLOGY PROGRAM
SARA - SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986
STEL - SHORT TERM EXPOSURE LIMIT
TLV - THRESHOLD LIMIT VALUE(8 HR. TIME WEIGHTED AVERAGE OR TWA)
VOC - VOLATILE ORGANIC COMPOUND
NJRTK - NEW JERSEY RIGHT TO KNOW LAW
N.D. - NOT DETERMINED
79951
---------------------------------------------------------------------------
This data is offered in good faith as typical values and not as a product
specification. No warranty either expressed or implied, is hereby made.
The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review the
recommendations in specific context of the intended use and determine if
they are appropriate.
---------------------------------------------------------------------------
< End OF MSDS >
|-------------------------------------------------------|
| MATERIAL SAFETY DATA SHEET |
|-------------------------------------------------------|
|-------------------------------------------------------------------------|
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
|-------------------------------------------------------------------------|
THIS MATERIAL SAFETY DATA SHEET IS AVAILABLE IN SPANISH UPON REQUEST.
PRODUCT NAME : WOOD FINISH REPAIR KIT BLEND STICK-ALL COLORS
UPC NUMBER : 7079897500
PRODUCT USE/CLASS : Wax Blending Stick
MANUFACTURER: 24 HOUR EMERGENCY:
DAP INC. TRANSPORTATION: 1-800-535-5053 (352-323-3500)
2400 BOSTON STREET MEDICAL : 1-800-327-3874 (513-558-5111)
BALTIMORE, MD 21224
PREPARE DATE : 07/07/1998 GENERAL INFORMATION:
REVISION NO. : 1 DAP INC. : 1-888-DAP-TIPS (1-888-327-8477)
REVISION DATE: 08/28/2002
|-------------------------------------------------------------------------|
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
|-------------------------------------------------------------------------|
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER RANGE
---------------------------------------------------------------------------
01 Natural iron oxide 1317-63-1 1.0-10.0 %
02 Ferric oxide 1309-37-1 1.0-10.0 %
03 Quartz crystalline silica 14808-60-7 <1.0 %
04 Carbon black 1333-86-4 <1.0 %
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
01 N.E. N.E. N.E. N.E. N.E. NO
02 5 mg/m3 dust & fume N.E. 10 mg/m3 N.E. N.E. NO
03 0.05 mg/m3* N.E. 10 mg/m3dust N.E. N.E. NO
04 3.5 mg/m3 N.E. 3.5 mg/m3 N.E. N.E. NO
* The 2001 ACGIH Threshold Limit Values for Chemical Substances and
Physical Agents lists the median Respirable Particulate Mass (RPM) point
for crystalline silica at 4.0 microns in terms of the particle's
aerodynamic diameter.
Listed Permissible Exposure Levels (PEL) are from the U.S. Dept. of Labor
OSHA Final Rule Limits (CFR 29 1910.1000); limits may vary between states.
|-------------------------------------------------------------------------|
| SECTION 3 - HAZARDS IDENTIFICATION |
|-------------------------------------------------------------------------|
(Continued on Page 2)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT BLEND STICK-ALL COLORS
Revision Date: 08/28/2020 Page 2
|-------------------------------------------------------------------------|
| SECTION 3 - HAZARDS IDENTIFICATION |
|-------------------------------------------------------------------------|
EMERGENCY OVERVIEW: In an emergency situation, this product should not
pose a significant immediate concern for emergency response personnel.
POTENTIAL HEALTH EFFECTS:
The International Agency for Research on Cancer (IARC)has determined that
crystalline silica in the form of quartz or cristobalite that is inhaled
from occupational sources is carcinogenic to humans (Group 1没 carcinogenic
to humans). Refer to IARC Monograph 68, Silica, Some Silicates and Organic
Fibres (published in June 1997) in conjunction with the use of these
materials. The National Toxicology Program (NTP) classifies respirable
crystalline silica as known to be a human carcinogen. Refer to the 9th
Report on Carcinogens (2000). The American Conference of Governmental
Industrial Hygienists (ACGIH) classifies crystalline silica, quartz, as a
suspected human carcinogen (A2).
Breathing dust containing respirable crystalline silica may not cause
noticeable injury or illness even though permanent lung damage may be
occurring. Inhalation of dust may have the following serious chronic health
effects: Excessive inhalation of respirable dust can cause pneumoconiosis,
a respiratory disease, which can result in delayed, progressive, disabling
and sometimes fatal lung injury. Symptoms include cough, shortness of
breath, wheezing, non-specific chest illness and reduced pulmonary
function. Smoking exacerbates this disease. Individuals with pneumoconiosis
are predisposed to develop tuberculosis. There is some evidence that
breathing respirable crystalline silica or the disease silicosis is
associated with an increased incidence of significant disease endpoints
such as scleroderma (an immune system disorder manifested by fibrosis of
the lungs, skin and other internal organs) and kidney disease.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Can cause minor irritation, tearing
and reddening.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: May cause skin irritation.
EFFECTS OF OVEREXPOSURE - INHALATION: None known.
EFFECTS OF OVEREXPOSURE - INGESTION: Midly irritating to mouth, throat,
and stomach. Can cause abdominal discomfort.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: None known.
MEDICAL CONDITIONS WHICH MAY BE AGGRAVATED BY CONTACT: None known.
PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT
|-------------------------------------------------------------------------|
| SECTION 4 - FIRST AID MEASURES |
|-------------------------------------------------------------------------|
(Continued on Page 3)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT BLEND STICK-ALL COLORS
Revision Date: 08/28/2020 Page 3
|-------------------------------------------------------------------------|
| SECTION 4 - FIRST AID MEASURES |
|-------------------------------------------------------------------------|
EYE CONTACT: Flush with large quantities of water for at least 15 minutes
until irritation subsides. Contact a physician.
SKIN CONTACT: Wash with soap and water.
INHALATION: Remove to fresh air. Contact a physician immediately.
INGESTION: DO NOT INDUCE VOMITING. Contact a physician or Regional Poison
Control Center immediately.
COMMENTS: Call Medical Emergency 1-800-327-3874 if any irritation or
complications arise from any of the above routes of entry.
|-------------------------------------------------------------------------|
| SECTION 5 - FIRE FIGHTING MEASURES |
|-------------------------------------------------------------------------|
FLASH POINT: >200 F LOWER EXPLOSIVE LIMIT: N.A.
(SETAFLASH CLOSED CUP) UPPER EXPLOSIVE LIMIT: N.A.
AUTOIGNITION TEMPERATURE: N.E.
EXTINGUISHING MEDIA: CO2 DRY CHEMICAL FOAM
UNUSUAL FIRE AND EXPLOSION HAZARDS: None known.
SPECIAL FIREFIGHTING PROCEDURES: As in any fire, wear self-contained
breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and
full protective gear. Use water spray to cool exposed surfaces.
|-------------------------------------------------------------------------|
| SECTION 6 - ACCIDENTAL RELEASE MEASURES |
|-------------------------------------------------------------------------|
SPILL OR LEAK PROCEDURES: Scrape up dried material and place into
containers.
|-------------------------------------------------------------------------|
| SECTION 7 - HANDLING AND STORAGE |
|-------------------------------------------------------------------------|
HANDLING INFORMATION: KEEP OUT OF REACH OF CHILDREN. Keep articles away
from excessive heating and freezing.
STORAGE INFORMATION: Store away from caustics and oxidizers. Keep
containers tightly closed when not in use. Keep containers from excessive
heat and freezing. Do not store at temperatures above 120 degrees F.
OTHER PRECAUTIONS: No Information.
(Continued on Page 4)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT BLEND STICK-ALL COLORS
Revision Date: 08/28/2020 Page 4
|-------------------------------------------------------------------------|
| SECTION 7 - HANDLING AND STORAGE |
|-------------------------------------------------------------------------|
|-------------------------------------------------------------------------|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|-------------------------------------------------------------------------|
ENGINEERING CONTROLS: Normal room ventilation.
RESPIRATORY PROTECTION:
Not required under normal usage and adequate ventilation.
Dry sanding of dried product results in the generation of dust which
contains crystalline silica. Avoid exposure to dust by wearing an
appropriate, properly fitted, dust respirator during dry sanding. Follow
respiratory manufacturer's directions for respirator use.
If the 8 hour exposure limit or value is exceeded for any component, use an
approved NIOSH/OSHA respirator. Consult your safety equipment supplier and
the OSHA regulation, 29 CFR 1910.134 for respirator requirements. A
respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2
requirements must be followed whenever workplace conditions warrant a
respirator's use.
The National Institute for Occupational Safety and Health (NIOSH)
recommended permissible exposure limit of 50 micrograms respirable free
silica per cubic meter of air (0.05 mg/m3) as determined by a full shift
sample up to 10 hour working day, 40 hours per week.
EYE PROTECTION: None required.
SKIN PROTECTION: None required.
OTHER PROTECTIVE EQUIPMENT: None.
HYGIENIC PRACTICES: Wash contaminated clothing before reuse.
|-------------------------------------------------------------------------|
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
|-------------------------------------------------------------------------|
BOILING RANGE : 240 - 260 F VAPOR DENSITY : N.A.
ODOR : Pleasant Odor
APPEARANCE : Colored solid EVAPORATION RATE: N.A.
SOLUBILITY IN H2O : Negligible
SPECIFIC GRAVITY : 1.00-1.50
VAPOR PRESSURE : N.A.
PHYSICAL STATE : Solid stick
(See Section 16 for abbreviation legend)
(Continued on Page 5)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT BLEND STICK-ALL COLORS
Revision Date: 08/28/2020 Page 5
|-------------------------------------------------------------------------|
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
|-------------------------------------------------------------------------|
|-------------------------------------------------------------------------|
| SECTION 10 - STABILITY AND REACTIVITY |
|-------------------------------------------------------------------------|
CONDITIONS TO AVOID: Avoid high temperatures.
INCOMPATIBILITY: Strong oxidizers and caustics.
HAZARDOUS DECOMPOSITION PRODUCTS: Normal decomposition products, i.e. COx,
NOx
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
|-------------------------------------------------------------------------|
| SECTION 11 - TOXICOLOGICAL PROPERTIES |
|-------------------------------------------------------------------------|
No product or component toxicological information is available.
|-------------------------------------------------------------------------|
| SECTION 12 - ECOLOGICAL INFORMATION |
|-------------------------------------------------------------------------|
No Information.
|-------------------------------------------------------------------------|
| SECTION 13 - DISPOSAL CONSIDERATIONS |
|-------------------------------------------------------------------------|
WASTE MANAGEMENT/DISPOSAL: Dispose of according to Federal, State, and
Local Standards. This product does not meet the definition of a hazardous
waste according to U.S. EPA Hazardous Waste Management Regulations, 40 CFR
Section 261. State and Local regulations/restrictions are complex and may
differ from Federal regulations. Responsibility for proper waste disposal
is with the owner of the waste.
EPA WASTE CODE - If discarded (40 CFR 261): None.
|-------------------------------------------------------------------------|
| SECTION 14 - TRANSPORTATION INFORMATION |
|-------------------------------------------------------------------------|
DOT PROPER SHIPPING NAME: Not Regulated by D.O.T.
DOT HAZARD CLASS: NONE
DOT UN/NA NUMBER: NONE PACKING GROUP: NONE
(Continued on Page 6)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT BLEND STICK-ALL COLORS
Revision Date: 08/28/2020 Page 6
|-------------------------------------------------------------------------|
| SECTION 14 - TRANSPORTATION INFORMATION |
|-------------------------------------------------------------------------|
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME -----------
No SARA Section 313 components exist in this product.
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:
----------- CHEMICAL NAME -----------
No information is available.
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME -----------
Wax
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
Wax
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer, birth defects or other
reproductive harm:
----------- CHEMICAL NAME ----------- CAS NUMBER
Carbon black 1333-86-4
Crystalline silica 14808-60-7
(Continued on Page 7)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT BLEND STICK-ALL COLORS
Revision Date: 08/28/2020 Page 7
|-------------------------------------------------------------------------|
| SECTION 15 - REGULATORY INFORMATION |
|-------------------------------------------------------------------------|
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: No information available.
|-------------------------------------------------------------------------|
| SECTION 16 - OTHER INFORMATION |
|-------------------------------------------------------------------------|
HMIS RATINGS - HEALTH: 0 FLAMMABILITY: 1 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 07/07/1998
REASON FOR REVISION:
SECTION 1: Company change. Address change and new emergency contact phone
Numbers.
|-------------------------------------------------------------------------|
| SECTION 16 - OTHER INFORMATION |
|-------------------------------------------------------------------------|
LEGEND: ACGIH - AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS
N.A. - NOT APPLICABLE
N.E. - NOT ESTABLISHED
PEL - PERMISSIBLE EXPOSURE LIMIT
NTP - NATIONAL TOXICOLOGY PROGRAM
SARA - SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986
STEL - SHORT TERM EXPOSURE LIMIT
TLV - THRESHOLD LIMIT VALUE(8 HR. TIME WEIGHTED AVERAGE OR TWA)
VOC - VOLATILE ORGANIC COMPOUND
NJRTK - NEW JERSEY RIGHT TO KNOW LAW
N.D. - NOT DETERMINED
MSDS# 79952
(Continued on Page 8)
--------------------------------------------------------------------------
Product Name: WOOD FINISH REPAIR KIT BLEND STICK-ALL COLORS
Revision Date: 08/28/2020 Page 8
|-------------------------------------------------------------------------|
| SECTION 16 - OTHER INFORMATION |
|-------------------------------------------------------------------------|
This data is offered in good faith as typical values and not as a product
specification. No warranty either expressed or implied, is hereby made.
The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review the
recommendations in specific context of the intended use and determine if
they are appropriate.
---------------------------------------------------------------------------
< End OF MSDS >
|