Material Safety Data Sheet
ExPoxy Remover
According to 91/155 EC
Printing Date 5/4/00
Reviewed On 5/4/00
1 Identification of substance: After skin contact
Immediately wash with water and soap and
rinse thoroughly.
Product details:
If skin irritation continues, consult a doctor.
After eye contact
Trade name: ExPoxy Remover
Rinse opened eye for several minutes under
running water. Then consult a doctor.
Supplier/Manufacturer:
After swallowing
Micro Care Corporation
Do not induce vomiting; call for medical help
34 Ronzo Road
immediately.
Bristol, CT 06010
Information for doctor
United States of America
The following symptoms may occur:
Tel.: +1-860-585-7912 Fax: +1-860-585-7378
Headache
Gastric or intestinal disorders.
Information department: Product safety
Nausea
department.
Emergency information:
5 Fire fighting measures
National Poisons Information CenterTel.: +44-
171-9555095370
Suitable extinguishing agents
CO2, extinguishing powder or water spray.
2 Composition/Data on components:
Fight larger fires with water spray or alcohol
resistant foam.
Chemical characterization
For safety reasons unsuitable
Description: Solvent mixture.
extinguishing agents Water with full jet.
Special hazards caused by the material,
Dangerous components:
its products of combustion or resulting
1569-02-4 1-ethoxypropan-2-ol 20-40 %
gases:
Xi; R 10-36
Dangerous decomposition product see
chapter 12: stability and reactivity
1569-01-3 1-propoxypropan-2-ol 20-40 %
Protective equipment:
Xi; R 36/38
Wear self-contained respiratory protective
device.
107-98-2 1-methoxypropan-2-ol5-10 %
R 10
6 Accidental release measures
3 Hazards identification
Person-related safety precautions:
Wear protective clothing.
Hazard description: Xi Irritant
Ensure adequate ventilation
Information pertaining to particular
Do not smoke - keep ignition sources away
dangers for man and environment
Measures for environmental protection:
R 10 Flammable.
Do not allow product to reach sewage system
R 36/38 Irritating to eyes and skin.
or any water course.
Classification system
Measures for cleaning/collecting:
The classification was made according to the
Ensure adequate ventilation.
latest editions of the EU-lists, and expanded
Absorb liquid components with liquid-binding
upon fom company and literature data).
material.
Send for recovery or disposal in suitable
4 First aid measures
receptacles.
General information Remove contaminated
7 Handling and storage
clothing and wash before reuse.
After inhalation
Handling - Information for safe handling:
Supply fresh air and to be sure call for a
Ensure good ventilation/exhaustion at the
doctor.
workplace.
In case of unconsciousness place patient
Keep away from heat and direct sunlight.
stably in side position for transportation.
ExPoxy Remover 鈥? GB Page 1 /4
Material Safety Data Sheet
ExPoxy Remover
According to 91/155 EC
Printing Date 5/4/00
Reviewed On 5/4/00
Information about protection against 9 Physical and chemical properties:
explosions and fires:
Keep ignition sources away - Do not smoke. Form: Liquid
Protect against electrostatic charges. Colour:
Colourless
Storage Clear
Requirements to be met by storerooms Odour: Mild
and receptacles: Value/RangeUnit Method
Store cool and dry in a well ventilated area. Change in condition
Pay attention to special rules for the storage Melting point/Melting range:
of flammable liquids. undetermined
Boiling point/Boiling range:120-150 掳 C
information about storage in one
Flash point: 41 掳 C TCC
common storage facility:
Store away from foodstuffs.
Do not store together with oxidizing and Self igniting: Product is not selfigniting.
acidic materials.
Further information about storage Danger of explosion:
conditions: Product is not explosive. However, formation
Keep receptacle tightly sealed. of explosive air/vapour mixtures are possible.
Vapour pressure: at20 掳 C 6.2 mbar
Protect from heat and direct sunlight.
Storage class 3A Flammable Liquids
Density:Not determined
8 Exposure controls and personal
protection Solubility in / Miscibility with water:
Soluble
Additional information about design of
technical systems: 10 Stability and reactivity
Install appropriate mechanical ventilation.
Keep away from open flames and other Thermal decomposition / conditions to
ignition sources. be avoided:
Protect against electrostatic charges. No decomposition if used and stored
according to specifications.
Components with limit values that Keep away from heat and direct sunlight.
require monitoring at the workplace: Materials to be avoided:
107-98-2 1-methoxypropan-2-ol Strong oxidants.
OEL: 360 mg/m3, 100 ml/m3 Strong acids
Additional information: Aldehydes
The lists that were valid during the creation Acetyl chloride
were used as basis. Halogens
Halogen compounds
Personal protective equipment Dangerous reactions No dangerous
General protective and hygienic reactions known
measures Dangerous products of decomposition:
Wash hands before breaks and at the end of In the case of fire or at high temperatures the
work. formation of the following decomposition
Immediately remove all soiled and products is possible.
contaminated clothing Carbon monoxide and carbon dioxide
Avoid close or long term contact with the
skin. 11 Toxicological information
Breathing equipment: Not necessary if room is
well-ventilated. Acute toxicity:
Protection of hands: Protective gloves. LD/LC50 values that are relevant for
Eye protection: Tightly sealed goggles. classification:
Body protection: Protective work clothing.
ExPoxy Remover 鈥? GB Page 2 /4
Material Safety Data Sheet
ExPoxy Remover
According to 91/155 EC
Printing Date 5/4/00
Reviewed On 5/4/00
107-98-2 1-methoxypropan-2-ol UN-Number: 1987
Oral: LD50: 5000 mg/kg (rat) Label3
Dermal: LD50: 13500 mg/kg (rabbit) Description of goods:Alcohols, n.o.s., 1-
Inhalative: LC50/4 h: 6 mg/L (rat) ethoxypropan-2-ol
1569-02-4 1-ethoxypropan-2-ol Maritime transport IMDG:
Oral: LD50: 4900 mg/kg (rat) IMDG Class:3.3
Dermal: LD50: 9500 mg/kg (rab) Page:3303
UN Number: 1987
1569-01-3 1-propoxypropan-2-ol Packaging group: III
Dermal: LD50: 3550 mg/kg (rabbit) EMS Number:3-06
Primary irritant effect: MFAG:305
on the skin: Propper shipping name: Alcohols, n.o.s., 1-
Irritant to skin and mucous membranes. ethoxypropan-2-ol
Continuing or repeated contact with the skin
may cause skin desease. Air transport ICAO-TI and IATA-DGR:
on the eye: Irritating effect. ICAO/IATA Class: 3
Sensitization: No sensitizing effects known. UN/ID Number: 1987
Additional toxicological information: Packaging group: III
The product shows the following dangers Propper shipping name: Alcohols, n.o.s., 1-
according to the calculation method of the ethoxypropan-2-ol
General EU Classification Guidelines for
Preparations as issued in the latest version: 15 Regulations
Irritant
Markings according to EU guidelines:
12 Ecological information: The product has been classified and marked
in accordance with EU Directives / Ordinance
General notes: on Hazardous Materials
Water hazard class 1 (German Regulation)
(Self-assessment): slightly hazardous for water. Code letter and hazard designation of
Do not allow undiluted product or large product: Xi Irritant
quantities of it to reach ground water, water
course or sewage system. Risk phrases:
10 Flammable.
13 Disposal considerations 36/38 Irritating to eyes and skin.
Safety phrases:
Product:
24/25 Avoid contact with skin and eyes.
Recommendation
26 In case of contact with eyes, rinse
Must not be disposed of together with
immediately with plenty of water and seek
household garbage. Do not allow product to
medical advice.
reach sewage system.
28 After contact with skin, wash immediately
with plenty of soap and water
Uncleaned packagings:
Recommendation:
National regulations
Disposal must be made according to official
regulations.
Technical instructions (air):
Recommended cleansing agent: Water, if
Class Share in %
necessary with cleansing agents.
III 10.0
NK40.0
14 Transport information
Water hazard class:
Land transport ADR/RID(cross-border)
Water hazard class 1 (Self-assessment): slightly
ADR/RID class:3 Flammable liquids
hazardous for water.
Item:31c
Danger code (Kemler):30
ExPoxy Remover 鈥? GB Page 3 /4
Material Safety Data Sheet
ExPoxy Remover
According to 91/155 EC
Printing Date 5/4/00
Reviewed On 5/4/00
16 Other information:
This information is based on our present
knowledge. However, this shall not constitute
a guarantee for any specific product features
and shall not establish a legally valid
contractual relationship.
Department issuing MSDS:
KFT Chemieservice, Seestra脽e 250,
D-25469 Halstenbek, Germany
Tel.: +49-4101-404530
Fax: +49-4101-404531
Contact: Dr. Karl-Franz Torges
ExPoxy Remover 鈥? GB Page 4 /4
|