SAFETY DATA SHEET
M4510 Platable Silver Termination Ink
103064 Version Number 1.00
1. Identification of the substance/preparation and of the
company/undertaking
Identification of the substance or preparation
Product name : M4510 Platable Silver Termination Ink
Company/undertaking identification
Manufacturer : Johnson Matthey Plc,
Orchard Road,
Royston,
Herts SG8 5HE
Emergency telephone number : 01763 253000
2. Composition/information on ingredients
Substance/preparation : Preparation
Ingredient name CAS % EC Number Classification
number
Silver Powder 7440-22-4 78.18 231-131-3 Not classified.
diethylene glycol monobutyl ether acetate 124-17-4 5.5 204-685-9 Not classified.
Soluble Lead component of frit 5.115 Repr. Cat. 1; R61
Repr. Cat. 3; R62
Xn; R20/22
R33
N; R50/53
See section 16 for the full text of the R Phrases
declared above
* Occupational Exposure Limit(s), if available, are listed in Section 8
3. Hazards identification
The preparation is classified as dangerous according to Directive 1999/45/EC and its amendments.
Classification : Repr. Cat. 1; R61
Repr. Cat. 3; R62
Xn; R20/22
R33
N; R51/53
Human health hazards : Harmful by inhalation and if swallowed.
Danger of cumulative effects.
May cause harm to the unborn child.
Possible risk of impaired fertility.
Environmental hazards : Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic
environment.
See section 11 for more detailed information on health effects and symptoms.
Page: 1/5
Date of issue : 14/02/2005.
M4510 Platable Silver Termination Ink
4. First aid measures
First aid measures
Inhalation : If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is
difficult, give oxygen. Obtain medical attention.
Ingestion : Do NOT induce vomiting unless directed to do so by medical personnel. Never give
anything by mouth to an unconscious person. Obtain medical attention.
Skin Contact : In case of contact, immediately flush skin with plenty of water. Remove contaminated
clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before
reuse. Obtain medical attention if symptoms occur.
Eye contact : In case of contact, immediately flush eyes with a copious amount of water for at least
15 minutes. Get medical attention if irritation occurs.
See section 11 for more detailed information on health effects and symptoms.
5. Fire-fighting measures
Extinguishing media : Use an extinguishing agent suitable for surrounding fires.
Special exposure hazards : No specific hazard.
This material is toxic to aquatic organisms. Fire water contaminated with this material
must be contained and prevented from being discharged to any waterway, sewer or
drain.
Hazardous thermal : These products are carbon oxides (CO, CO2). Some metallic oxides.
decomposition products
Special protective : Fire fighters should wear appropriate protective equipment and self-contained
equipment for fire-fighters breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.
Remark :
6. Accidental release measures
Personal Precautions : Immediately contact emergency personnel. Keep unnecessary personnel away. Use
suitable protective equipment (Section 8).
Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers.
Methods for cleaning up : If emergency personnel are unavailable, contain spilled material. For small spills add
absorbent (soil may be used in the absence of other suitable materials) scoop up
material and place in a sealed, liquid-proof container for disposal. For large spills
dike spilled material or otherwise contain material to ensure runoff does not reach a
waterway. Place spilled material in an appropriate container for disposal.
7. Handling and storage
Handling : Do not ingest. Keep container closed. Use only with adequate ventilation. Avoid
breathing vapour or mist. Avoid contact of spilled material and runoff with soil and
surface waterways. Wash thoroughly after handling.
Storage : Keep container tightly closed. Keep container in a cool, well-ventilated area.
Packaging materials
Recommended : Use original container.
8. Exposure controls/personal protection
Ingredient name Occupational exposure limits
Silver Powder EH40-OES (United Kingdom (UK), 1/2003).
TWA: 0.1 mg/m3 8 hour(s). Form: All forms
Exposure controls
Occupational exposure : Provide exhaust ventilation or other engineering controls to keep the airborne
controls concentrations of vapours below their respective occupational exposure limits.
Ensure that eyewash stations and safety showers are close to the workstation
location.
Respiratory protection : Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary.Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the
safe working limits of the selected respirator.
Page: 2/5
Date of issue : 14/02/2005.
M4510 Platable Silver Termination Ink
Hand protection : Chemical-resistant, impervious gloves or gauntlets complying with an approved
standard should be worn at all times when handling chemical products if a risk
assessment indicates this is necessary.
Eye protection : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts.
Skin protection : Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist before
handling this product.
9. Physical and chemical properties
General information
Appearance
Physical state : Liquid.
Colour : Silvery.
Odour : Organic
Important health, safety and environmental information
Boiling point : The lowest known value is 245.01掳C (473掳F) (diethylene glycol monobutyl ether
acetate).
Flash point : The lowest known value is Closed cup: >109.85掳C (229.7掳F). (diethylene glycol
monobutyl ether acetate)
Relative density : The only known value is 10.5 (Silver Powder).
Solubility : Insoluble in cold water, hot water.
Evaporation rate (butyl : 0.001 (diethylene glycol monobutyl ether acetate) compared to Butyl acetate.
acetate = 1)
Other information
Auto-ignition temperature : The lowest known value is 298.74掳C (569.7掳F) (diethylene glycol monobutyl ether
acetate).
10. Stability and reactivity
: The product is stable.
Stability
11. Toxicological information
Potential acute health effects
Inhalation : Harmful by inhalation.
Ingestion : Harmful if swallowed.
Potential chronic health effects
Ingredient name Carcinogenic effects Mutagenic effects Developmental toxicity Impairs fertility
Soluble Lead component - - Repr. Cat. 1; R61 Repr. Cat. 3; R62
of frit
Reproductive toxicity : Contains material which can cause birth defects.
Over-exposure signs/symptoms
Target organs : Contains material which causes damage to the following organs: mucous
membranes, skin, eye, lens or cornea, nose/sinuses.
Other adverse effects : Absorbtion over a long period may cause"Argyria", a blue/grey discolouration of
various tissues. Industrial argyria may be local, involving the formation of blue/grey
particles in the skin and the conjunctivae, or generalised, which appears early on the
face, spreading to the hands. This is only normally manifest after many years of gross
over-exposure.
12. Ecological information
Biodegradability Not available.
Other adverse effects : Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic
environment.
Page: 3/5
Date of issue : 14/02/2005.
M4510 Platable Silver Termination Ink
13. Disposal considerations
Methods of disposal : Return accumulated waste material to the refinery for metal recovery, or dispose of in
accordance with local and national regulations.
14. Transport information
International transport regulations
Regulatory UN number Proper shipping name Class Packing group Label Additional
information Information
Not available. Not available. Not - -
ADR/RID Class
available.
Not available. Not available. Not - -
IMDG Class
available.
Not available. Not available. Not - -
IATA Class
available.
15. Regulatory information
EU Regulations
Hazard symbol(s) :
Toxic, Dangerous for the environment.
Risk Phrases : R61- May cause harm to the unborn child.
R62- Possible risk of impaired fertility.
R20/22- Harmful by inhalation and if swallowed.
R33- Danger of cumulative effects.
R51/53- Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
Safety Phrases : S53- Avoid exposure - obtain special instructions before use.
S23- Do not breathe fumes
S24/25- Avoid contact with skin and eyes.
S45- In case of accident or if you feel unwell, seek medical advice immediately (show
the label where possible).
S60- This material and its container must be disposed of as hazardous waste.
S61- Avoid release to the environment. Refer to special instructions/Safety data
sheets.
Soluble Lead component of frit Not available.
Contains :
Product use : Classification and labelling have been performed according to EU directives
67/548/EEC, 1999/45/EC, including amendments and the intended use.
- Industrial applications.
16. Other information
Full text of R phrases : R61- May cause harm to the unborn child.
referred to in sections 2 and R62- Possible risk of impaired fertility.
3 - United Kingdom (UK) R20/22- Harmful by inhalation and if swallowed.
R33- Danger of cumulative effects.
R50/53- Very toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
R51/53- Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
Full text of classifications : Repr. Cat.1 - Toxic for reproduction Category 1
referred to in sections 2 and Repr. Cat.3 - Toxic for reproduction Category 3
3 - United Kingdom (UK) Xn - Harmful
N - Dangerous for the environment.
History
Date of printing : 28/02/2005.
: 14/02/2005.
Date of issue
Date of previous issue : No Previous Validation.
Page: 4/5
Date of issue : 14/02/2005.
M4510 Platable Silver Termination Ink
Version : 0.01
Notice to reader
This information relates only to the specific material designated and may not be valid for such material used in combination with any other
materials or in any process. Such information is given in good faith, being based on the latest information available to Johnson Matthey PLC
and is to the best of Johnson Matthey PLC's knowledge and belief, accurate and reliable at the time of preparation. However, no
representation, warranty or guarantee is made as to the accuracy, liability or completness and Johnson Matthey PLC assumes no
responsibility therefore, and disclaims any liability for any loss, damage or injury howsoever arising (including in respect of any claim
brought by any third party) incurred using this information. The product is supplied on the condition that the user accepts responsibility to
satisfy himself as to the suitability and completeness of such information for his own particular use. Freedom from patent or any other
proprietary rights of any third party must not be assumed.
Conforms to 91/155/EEC - 2001/58/EC - United Kingdom (UK)
Johnson Matthey National Sales Offices
Johnson Matthey .PLC Orchard Road, Royston Hertfordshire, SG8 5HE England Tel:+44(0)1763 253000 Fax: +44
(0)1763 253668
Johnson Matthey PLC 33 Jeffreys Road, Brimsdown, Enfield, Middlesex, EN3 7PW United Kingdom Tel: 0208 8048 8111
Fax: 020 8804 1918
Johnson Matthey& Co G.m.b.H, Steckhovengasse 12, 1132 WIEN, 脰sterreich Tel:877 98 90 Fax: 877 98 933
S.A. Johnson Matthey N.V 8 Avenue de Bale, 1140 Brussel,Belgi毛 / Belgique Tel:2 729 0711 Fax:2 216 9061
Johnson Matthey A/S Frederikssundsvej 274 D,Br垄nsh垄j 2700, Denmark Tel:38 89 62 00 Fax:38 89 62 01
Oy Johnson Matthey A.B Kielotie 7A 4KRS, 01300 Bantaa, Soumi Tel:08574 800 Fax: 08574 807
Johnson Matthey GmbH Alfa Products. Zeppelinstrasse 7, Postfach 6540,D-7500 Karlsruhe 1, Deutschland Tel:721
8400 70 Fax: 721 849674
Johnson Matthey SA 13 Rue de la Perdrix, Z1 Paris Nord 11, BP 50240, 95996 Roissy,CDG Cedix France Tel:1 48 63
22 99 Fax:1 48 63 27 02
Johnson Matthey GmbH Otto-Volger-Strasse 9B, D-65843 Sulzbach/Ts, Deutschland Tel:(0 61 96)70 38-21 Fax:(0 61
96)70 38 12
Johnson Matthey. PLC Unit 1-2, Blanchardstown Business Centre, Clonsilla Road, Blanchardstown, Dublin 15 Republic
of Ireland Tel 1 820 7722 Fax:1 820 7733
Johnson Matthey A.B. Victor Hasselblads Gata 8, S-421 31 V盲stra Fr枚lunda, Sverige Tel:031 891390 Fax: 031 477795
Johnson Matthey & Brandenberger A.G. Glattalstrasse 18, CH-8052 Zurich, Switzerland Tel:01 307 1919 Fax:01 307
1920
Page: 5/5
Date of issue : 14/02/2005.
|