MATERIAL SAFETY DATA SHEET
SPECKOZ, INC. Page: 1 of 1
Revision Date: 3/6/02
PRODUCT CODE: 051922-01
,
1. CHEMICAL PRODUCT AND COMPANY INFORMATION
PRODUCT CODE: 051922 EPA REG. NO. : 1021-1761-72113
PRODUCT NAME: SPECKOZ PYROCIDE庐 Flusher
PRODUCT DESCRIPTION: Pressurized Synergized Pyrethrum Aerosol Insecticide.
CHEMICAL NAME: Mixture
MANUFACTURER: McLaughlin Gormley King Company, 8810 Tenth Avenue North, Minneapolis MN. 55427
TELEPHONE M-F, 8:00-4:30 CST, 14:00-22:30 GMT: (800) 645-6466 or (763) 544-0341
MSDS & Product Information, 8:00-4:30 CST, 14:00-22:30 GMT: (800) 645-6466 or (763) 544-0341
24 HOUR EMERGENCY PHONE (CHEMTREC) CHEMTREC
U.S. and CANADA: (800)-424-9300 (ALL OTHER AREAS): (703) 527-3887
FOR INFORMATION REGARDING MEDICAL EMERGENCIES OR PESTICIDE INCIDENTS CALL THE INTERNATIONAL POISON CENTER AT:
1-888-740-8712 in U.S and CANADA or 651-632-6191 from all other areas
2. COMPOSITION / INFORMATION ON INGREDIENTS
COMPONENT(s) CAS # EXPOSURE LIMITS SARA Title III Sec. 313 % BY WEIGHT
de minimus conc.
Pyrethrins 008003-34-7 5 mg/m鲁(OSHA, ACGIH) Not Applicable .50
Piperonyl Butoxide 000051-03-6 Not established 1.0 1.0
MGK庐 264 Insecticide Synergist 000113-48-4 Not established Not Applicable 1.0
750ppm, 1,800 mg/m鲁 OSHA TWA 750ppm, 1,780
Acetone 000067-64-1 1.0 1.0-10
mg / m鲁 ACGIH TWA. 1,000 ppm OSHA & ACGIH
STEL
Liquefied Petroleum Gas 068476-85-7 1000 ppm (1800 mg / m鲁) TWA (OSHA,NIOSH, Not Applicable 10-20
ACGIH)
* Trade Secret * 1000 ppm AEL (Supplier) Not Applicable 55-75
Paraffinic, Naphthenic solvent 64742-47-8 100ppm (525mg/m鲁) TWA Supplier Not Applicable 5.0-15
*Ingredients not identified are proprietary or non-hazardous. Values are not product specifications.
PEL = Permissible Exposure Limits. TWA = Time Weighted Average (8 hr).
TLV = Threshold Limit Value. STEL = Short Term Exposure Limit (15 min.).
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: CAUTION. CONTENTS UNDER PRESSURE. DO NOT use near heat, open flame. Do not
use near electrical equipment due to shock hazard. Harmful if swallowed or absorbed
through skin. Avoid contact with skin eyes and clothing. Avoid breathing vapor.
Contents under pressure DO NOT expose to temperatures above 130掳 F ( 54.4掳C ) or violent
bursting may occur. ALWAYS Wear Safety Glasses with side shields and all other
appropriate personal protective equipment when handling this material.
EYES: Can cause irritation with discomfort, tearing and blurred vision.
SKIN: Overexposure by skin contact may initially include a transient (several minutes up to approximately 24 hours)
persistent burning or prickling sensation which may be accompanied by visible irritation or rash.
INGESTION: May be harmful if swallowed. Overexposure by ingestion may initially include nonspecific discomfort, such as
nausea, vomiting, headache, or weakness; temporary nervous system effects such as muscular weakness, tremors
and lack of coordination.
INHALATION: May be harmful if inhaled. Excessive inhalation can cause nasal and respiratory irritation, nausea and nervous
disorders, such as fatigue, dizziness, headaches, lack of coordination, tremors and unconsciousness.
CARCINOGENICITY: None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC,
NTP, OSHA or ACGIH as being carcinogens. In a recent study, marginally higher incidences of benign thyroid,
parathyroid, ovary and liver tumors were observed in rats and in lungs of mice following lifetime high dose exposures
to pyrethrum. Marginally higher incidences of benign liver tumors in mice were observed following lifetime high dose
exposures to PBO. The significance of these observations is questionable and under review. The doses at which
tumors were observed for pyrethrum and PBO greatly exceeded potential human exposure from labeled uses.
4. FIRST-AID MEASURES
FIRST AID PROCEDURES:
EYES: Hold eye open and rinse slowly and gently with water for 5-20 minutes. Remove contact lenses, if present , after the first 5
minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice.
SKIN: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-30 minutes. Call a poison control center
or doctor for treatment advice.
INHALATION: Remove affected person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration,
preferably mouth to mouth if possible. Call a poison control center or doctor for further treatment advise.
INGESTION: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow.
DO NOT induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an
unconscious person.
NOTE TO PHYSICIANS: None
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES:
FLASH POINT: N/A 潞F METHOD: TCC
The Aerosol is classified as Nonflammable by Flame extension test described in 16 CFR 1500.45
(800)-424-9300 (703) 527-3887
24 HOUR EMERGENCY PHONE (CHEMTREC): (ALL OTHER AREAS):
MATERIAL SAFETY DATA SHEET
SPECKOZ, INC. Page: 2 of 2
Revision Date: 3/6/02
PRODUCT CODE: 051922-01
LOWER FLAMMABLE LIMIT: not established.
UPPER FLAMMABLE LIMIT: not established.
AUTOIGNITION TEMPERATURE: not established.
HAZARDOUS COMBUSTION PRODUCTS: Oxides of carbon.
EXTINGUISHING MEDIA: Foam, carbon dioxide, or dry chemical.
FIRE FIGHTING INSTRUCTIONS: Treat as a oil fire. Keep personal removed and upwind of fire. Use a full-faced self-contained breathing
apparatus along with full protective gear. Keep nearby containers and equipment cool with a water spray.
Contain the run-off, if possible, for proper disposal.
6. ACCIDENTAL RELEASE MEASURES:
SMALL SPILL: Shut off ignition sources. Stop release, if possible without risk. Dike or contain release, if possible, and if immediate response can
prevent further damage or danger. Isolate and control access to the release area. Take actions to reduce vapors. Absorb with
appropriate absorbent. Clean spill area of residues and absorbent.
LARGE SPILL:. Shut off ignition sources. Stop release, if possible without risk. Dike or contain release, if possible, and if immediate response can
prevent further damage or danger. Isolate and control access to the release area. Take actions to reduce vapors. Collect product
into drums, etc. via drains, pumps, etc. Absorb with appropriate absorbent. Clean spill area of residues and absorbent
WASTE DISPOSAL METHOD: Contaminated absorbent and wash water should be disposed of according to local, state and federal
regulations.
7. HANDLING AND STORAGE
HANDLING: Do not breathe vapor or mist. Avoid contact with eyes, skin, or clothing. Wash thoroughly after handling Wash clothing after use. Do
not store or consume food, drink or tobacco in areas where they may have become contaminated with this product. Wear chemically
impervious gloves such as neoprene or nitrile. Wear OSHA-approved safety glasses with side shields, goggles or face shield. Use in
well ventilated areas. Wearing a respirator is not normally required when handling this material as directed but recommended in
absence of proper mechanical ventilation or if necessary to avoid breathing sprays or mists of this product. Read and observe all
precautions and instructions on the label.
STORAGE: Store containers upright and closed. Store in areas that are cool, dry and well-ventilated. Keep away from heat, ignition sources and
strong oxidizers. Emptied containers may retain product residues.
WORK HYGIENIC PRACTICES: DO NOT SMOKE, EAT, DRINK OR APPLY COSMETICS IN WORK AREA! Wash Promptly if skin
becomes contaminated. Wash at the end of each work shift and before eating, smoking and using the
toilet.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS: Mechanical ventilation should be used when handling this product in enclosed spaces. Local exhaust
ventilation may be necessary.
RESPIRATORY PROTECTION: Wear a NIOSH approved organic vapor respirator with organic vapor cartridge in absence of good
mechanical ventilation or when necessary to avoid breathing sprays or mists of this product.
SKIN PROTECTION: Wear neoprene or nitrile gloves and protective clothing. Do not allow contact with skin.
EYE PROTECTION: Wear OSHA-approved safety glasses with side shields, goggles or face shield.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Pressurized gas and liquid. MELTING POINT: Not applicable
ODOR: Acetone odor SOLUBILITY IN WATER: Partially miscible in water
APPEARANCE: Clear light amber liquid SPECIFIC GRAVITY: .853 @ 20掳C (water = 1.00)
VAPOR PRESSURE: Not available COLOR, (GARDENER): Not applicable
VAPOR DENSITY: Not established pH: 5.2 at 10% in water.
BOILING POINT: Not available VISCOSITY: 4.5 CPS at 23掳C (non-volatile portion)
10. STABILITY AND REACTIVITY
CHEMICAL STABILITY: Stable.
INCOMPATIBILITY: Strong acidic or alkaline materials.
HAZARDOUS DECOMPOSITION PRODUCTS: None.
HAZARDOUS POLYMERIZATION: Will not occur.
11. OTHER INFORMATION
The data contained herein is based on information currently available to MGK Company, and believed to be factual and the opinions expressed to be those
of qualified experts; however, this data is not to be taken as a warranty or representation for which MGK Company assumes legal responsibility.
Material Safety Data Sheet prepared by T.A. Lennan
(800)-424-9300 (703) 527-3887
24 HOUR EMERGENCY PHONE (CHEMTREC): (ALL OTHER AREAS):
|