MATERIAL SAFETY DATA SHEET
Per OSHA-recommended ANSI Z400.1-2004 standard format &
in accordance with European standard format
1. Product and Company Identifcation: Date of preparation: April, 2008
Product Name: California Paints Fres-Coat 100% Acrylic Latex Interior Semi-Gloss Enamel
No. 563XX (White Bases & Various Colors)
Producer: California Products Corporation
150 Dascomb Rd., Andover, MA 01810 (U.S.A.)
All Inquiries to: Tel: (978) 623-9980 Fax: (978) 623-9960
Emergency Information: 24 Hour Contact: CHEM-TEL: (800) 255-3924
2. Hazards Identification:
EMERGENCY OVERVIEW: Product Description: This product is a pigmented liquid. Health Hazards:
The primary hazards presented by this product are the potential for mild irritation of contaminated tissue
and the potential for accidental ingestion. Flammability Hazards: This product is not flammable. If this product is involved in a
fire, the decomposition products generated will include irritating vapors and gases and some carbon monoxide. Reactivity Hazards:
This product is not reactive. Environmental Hazards: Although release of this product to the environment is not expected to
cause significant adverse effect, all releases should be avoided. Emergency Considerations: Emergency responders should wear
appropriate protection for situation to which they respond.
3. Composition/Information on Ingredients:
Non-hazardous:
Pigmented latex emulsion coating comprised of water, pigments, fillers, additives, latex emulsion resin
Hazardous:
Titanium dioxide (CAS #13463-67-7) <25.0% ACGIH TWA 10 mg/m3
56302 Black contains Lampblack (Carbon Black) CAS #1333-86-4 <1.0% ACGIH TWA 3.5 mg/m3
4. First Aid Measures:
Eye & Skin contact: Immediately flush eyes with plenty of water for at least 15 minutes and consult physician. Wash skin
thoroughly with soap and water. If drenched, remove and wash clothing before reuse. Ingestion: If victim is conscious give 2
glasses of water. Call a physician.
5. Fire-fighting methods: Product is non-combustible
FLASH POINT: Not flammable
AUTOIGNITION TEMPERATURE: Not established
FLAMMABLE LIMITS (in air by volume, %):
Lower (LEL): Not applicable
Upper (UEL): Not applicable
Page One of Three Pages
Page 2: MSDS for California Paints Fres-Coat 100% Acrylic Latex Interior Semi-Gloss Enamel
FIRE EXTINGUISHING MATERIALS: Use extinguishing media appropriate for surrounding fire
Water Spray: OK Carbon Dioxide: OK
Foam: OK Dry Chemical: OK
Halon: OK Other: Any 鈥淎BC鈥? Class
6. Accidental release measures:
Personal precautions: Do not get in eyes. Do not take internally. Avoid skin contact. Prevent prolonged or repeated breathing of
vapor or spray mists. Keep unnecessary people away. Floor may be slippery, use care to avoid falling. Dike and contain material
with inert material (e.g. earth, sand). Transfer liquid and contaminated diking material to separate containers for disposal.
Environmental precautions: Keep spills and cleaning run-offs out of municipal sewers and open bodies of water. Comply with local,
national and state regulations.
7. Handling and Storage:
Maximum storage temperature 60掳C, minimum 2掳C. Keep closure tight and containers upright to prevent
leakage. Precautionary labeling: KEEP FROM FREEZING". Product is non-combustible.
8. Exposure Controls and Personal Protection:
General protection and hygienic measures: Avoid contact with skin. Do not get in eyes. Do not take internally. Avoid breathing
vapors or spray mists. Use in well-ventilated areas. Hand/skin protection: Wear neoprene or rubber gloves to prevent skin contact.
Wash hands before eating, smoking or using the wash room. Food or beverages should not be consumed anywhere this product is
handled or stored. Respiratory protection: None required if good ventilation is maintained. Wear respirator suitable for
concentrations and of contaminants encountered. Use approved chemical/mechanical filters designed to remove particulates in open
and restricted ventilation areas. Use approved airline type respirators or hoods in confined areas. Eye/face protection: Use approved
safety eyewear including side shields, chemical goggles and face shields.
9. Physical and Chemical Properties:
Forms: Viscous liquid, slight ammoniacal odor
Density: Varies with product
Solubility in water: Complete colloidal dispersion
10. Stability and Reactivity:
Stability: Hazardous polymerization will not occur. Stable. Hazardous reactions: Avoid contact with strong oxidizing agents (e.g.
nitric acid, permanganates), etc.
11. Toxicological Information:
No Data Available.
12. Ecological Information:
Do Data Available.
13. Disposal considerations:
The coating and any contaminated diking material should be thoroughly air dried and collected into drums. The drums should then be
sealed and properly labeled with waste designation and land filled or incinerated according to local and national regulations.
Page Two of Three Pages
Page 3: MSDS for California Paints Fres-Coat 100% Acrylic Latex Interior Semi-Gloss Enamel
14. Transporation Information:
U.S. Department of Transportation Hazard Class: "Not Regulated"
Marking: Class 55 Non-hazardous water-based paint
Marking: 鈥淜eep from Freezing鈥?
15. Regulatory Information:
CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT (PROPOSITION 65): Components of this product are on
the California Proposition 65 lists.
Information on the maximum volatile organic compound (VOC) content of individual products appears on product labels.
16. Other Information:
Note: Per 29CFR 1910.1200 (g) (2) (1) (C) (2), only hazardous substances present in excess of 1.0% by weight (or 0.1% for
carcinogens) must be listed on an MSDS.
To comply with New Jersey DOH Right-To-Know labeling law (NJAC 8:59 鈥? 5.1 & 5.2)
CAS. No.: CHEMICAL INGREDIENTS
HMIS HAZARD RATING
7732-18-5 Water
Propylene Glycol
57-55-6 Health 1 Flammability 0 Physical Personal
Titanium dioxide (Not in black or neutral bases)
13463-67-7 Hazard 0 Protection A
Non-hazardous inorganic filler
Not Available +
HAZARD INDEX
Latex Resin Solids
Not Available +
(+) Contents Partially Unknown 0=Minimal, 1=Slight, 2=Moderate, 3=Serious, 4=Severe
PERSONAL PROTECTION CODE:
A=Safety glasses
Warning! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE
SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and wet mop. Before you
start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD (5323) or log on
to: www.epa.gov/lead
Page Three of Three Pages
|