Huntsman Advanced Materials Americas Inc.
Distributed by Freeman Mfg & Supply Co.
800-321-8511 www.freemansupply.com
24-Hour Emergency Phone: 1-888-354-3323
MSDS No: 31793
Effective Date: 12/2/04 Material Safety Data Sheet
Health: 3*
1. PRODUCT IDENTIFICATION 1
Flammability: 1
3 0
Reactivity: 0
Trade Name: Ren 8026 Medium
Personal Protection:
Chemical Family: Amine
HMIS RATING
NFPA RATING
Synonyms:
RP 8026 Medium Hardener
Intended Use or Product Type:
Heat resistant surface coat medium hardener
2. COMPOSITION / INFORMATION ON INGREDIENTS
O CAS No. CHEMICAL IDENTITY EXPOSURE LIMITS CARCINOGEN
S STATUS
H ACGIH OSHA MFR. IARC NTP OSHA
A TWA STEL PEL STEL
* 111-40-0 1,2-Ethanediamine, N-(2- 1 ppm NE NE NE NE NR NR NR
aminoethyl)-
Common Diethylenetriamine
Name:
Concentration 15.00 - 40.00 % by wt
* 1477-55-0 1,3-Benzenedimethanamine NE 0.1 NE NE NE NR NR NR
mg/m3
Common m-Xylenediamine
Name:
Concentration 10.00 - 30.00 % by wt
* 616-47-7 1H-Imidazole, 1-Methyl- NE NE NE NE NE NR NR NR
Common 1-Methylimidazole
Name:
Concentration 3.00 - 7.00 % by wt
* 68738-77-2 1,3-Benzenedimethanamine, NE NE NE NE NE NR NR NR
Polymer with 2,2'-[(1-
Methylethylidene)Bis(4,1-
Phenyleneoxymethylene)]Bis[Oxira
ne] and 2,2,4-Trimethyl-1,6-
Hexanediamine
Common MXDA/TMD/DGEBA adduct
Name:
Concentration 15.00 - 40.00 % by wt
* 80-05-7 Phenol, 4,4'-(1- NE NE NE NE NR NR NR
TLV 5
methylethylidene)bis- mg/m3
Common Bisphenol A
Printed: 9/16/2005 Page 1 of 1
Ren 8026 Medium Huntsman Advanced Materials
Americas Inc.
Effective Date: 12/2/04
Name:
Concentration 10.00 - 30.00 % by wt
NE = Not Established NR = Not Reviewed * = OSHA Hazardous Ingredient
3. HAZARDS IDENTIFICATION
Emergency Overview: Corrosive - causes skin and eye burns. Can cause allergic respiratory reaction and allergic skin reaction.
Can be harmful if absorbed through skin and may be harmful if swallowed.
Primary Route(s) of Entry: Dermal; heated product may produce inhalable vapors.
Acute Exposure: Corrosive. Causes skin and eye burns.
Chronic: Overexposure may have effects on developing fetus.
4. FIRST AID MEASURES
Ingestion: If conscious, give 2 - 4 glasses of water to drink. Do not induce vomiting. Call a physician.
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Destroy contaminated
shoes.
Inhalation: Remove to fresh air. Call a physician.
Eyes: Immediately flush eyes with water for at least 15 minutes. Call a physician.
Overexposure Effects: Corrosive - causes skin and eye burns. Can cause allergic respiratory reaction and allergic skin reaction.
Can be harmful if absorbed through skin and may be harmful if swallowed.
Medical Conditions Aggravated by Exposure: Skin, eye and pulmonary conditions.
Additional Information: Referral to a physician is recommended if there is any question about the seriousness of any injury.
5. FIRE FIGHTING MEASURES
Flash Point: 250掳F ( 121 掳C)
Flash Point Method Used: (pmcc)
Flammable Limits in Air (Lower - % by volume): Not established
Flammable Limits in Air (Upper - % by volume): Not established
Fire Fighting Extinguishing Media: Carbon dioxide, dry chemical, foam, water.
Fire Fighting Equipment: Use self-contained breathing apparatus.
Fire and Explosion Hazards: Decomposition and combustion products may be toxic.
Printed: 9/16/2005 Page 2 of 2
Ren 8026 Medium Huntsman Advanced Materials
Americas Inc.
Effective Date: 12/2/04
6. ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Remove spillage by absorbing in absorbent material.
7. HANDLING AND STORAGE
Signal Word: Danger!
Precautions: Corrosive - causes skin and eye burns. Can cause allergic respiratory reaction and allergic skin reaction. Can be
harmful if absorbed through skin and may be harmful if swallowed. Do not get in eyes, on skin, or on clothing. Avoid breathing
vapor or mist. Avoid tasting or swallowing. Keep container closed when not in use. Use with adequate ventilation. Wash
thoroughly after handling. Notice! Overexposure may have effects on developing fetus.
Other Handling Information: Nuisance dust may be generated when sanding or sawing cured material.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Skin Protection: Wear impermeable gloves.
Respiratory Protection: Use NIOSH approved organic vapor cartridge respirator when vapor/mist exposure is likely.
Eye Protection: Wear splash-proof chemical goggles.
Engineering Controls: General mechanical and local exhaust in accordance with ACGIH recommendations.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: Clear Amber
Odor Threshold: Not Determined
Physical State: Liquid
Solubility in Water: Moderate
Vapor Pressure: 0.1 mm Hg at 25掳C (77 掳F)
Specific Gravity: 1.06 (water = 1)
Boiling Point: > 400掳F (> 204 掳C)
Freezing Point: Not Determined
Evaporation Rate: Not Determined
Vapor Density: Not Determined
VOC: 558.62 g/L
pH: Not Determined
Coefficient of water/oil: Not Determined
Percent Volatile: Negligible.
10. STABILITY AND REACTIVITY
Conditions to Avoid: Excessive heat for prolonged periods of time.
Stability: Stable.
Incompatibility: Strong oxidizers, acids and bases.
Printed: 9/16/2005 Page 3 of 3
Ren 8026 Medium Huntsman Advanced Materials
Americas Inc.
Effective Date: 12/2/04
Hazardous Decomposition Products: Combustion may form toxic materials, such as carbon dioxide, carbon monoxide.
Hazardous Polymerization: Will not occur.
11. TOXICOLOGICAL INFORMATION
Acute Oral Effects (LD50): Component(s) are slightly toxic, 500 - 5000 mg/kg (rat).
Diethylenetriamine= 1080 - 2330 mg/kg (rat)
Acute Dermal Toxicity (LD50): Component(s) are toxic, 200 - 1000 mg/kg (rabbit).
Diethylenetriamine= 672 - 1240 mg/kg (rabbit)
Sensitization: May cause allergic skin reaction and respiratory sensitivity in some people.
Skin Irritation: Corrosive. Causes burns.
Eye Irritation: Corrosive. Causes burns.
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATIONS
Waste Disposal Method: Consult qualified local or corporate personnel for method that will comply with local, state and federal
health and environmental regulations.
14. TRANSPORT INFORMATION
DOT: Non-Bulk
Proper Shipping Name: Polyamines, liquid, corrosive, N.O.S.
Technical Shipping Name (If n.o.s.): Diethylene triamine, Metaxylenediamine
Hazard Class: 8
ID Number: UN 2735
Packing Group: PG III
Label: Corrosive
15. REGULATORY INFORMATION
US Federal Regulations:
Occupational Safety and Health Act (OSHA): This Material Safety Data Sheet (MSDS) has been prepared in compliance with
the federal OSHA Hazard Communication Standard 29 CFR 1910.1200. This product is considered to be a hazardous chemical
under that standard.
Resource Conservation and Recovery Act (RCRA): Not a hazardous waste under RCRA (40 CFR 261) but handle with care due
to corrosive effect on skin and eyes.
Printed: 9/16/2005 Page 4 of 4
Ren 8026 Medium Huntsman Advanced Materials
Americas Inc.
Effective Date: 12/2/04
SARA Title III: Section 313 Toxic Chemical List (TCL): This product contains a toxic chemical(s) for routine annual toxic
chemical release reporting under section 313 (40 CFR 372). This information must be included in all MSDS's copied or distributed
for this material.
Chemical Name: Phenol, 4,4'-(1-methylethylidene)bis-
Common Name: Bisphenol A
Percent in Composition: 16.65 % by wt
Comment:
TSCA Section 8(b) - Inventory Status: All chemical components of this product are in compliance with TSCA inventory
requirements.
TSCA Section 12(b) - Export Notification: This product does not contain any chemical(s) that are subject to a Section 12(b)
export notification.
International Regulations:
Canadian Inventory Status: This product contains only chemicals that are currently listed on the Canadian Domestic Substance
List.
Canadian WHMIS: D1B D2A D2B E
State Regulations:
California Proposition 65: This product does not contain any chemicals currently on the California list of Known Carcinogens and
Reproductive Toxins.
Pennsylvania Right-to-Know: The following is required composition information:
Chemical Name: 1,2-Ethanediamine, N-(2-aminoethyl)-
Common Name: Diethylenetriamine
CAS Number: 111-40-0
Comment: Hazardous Substance
Chemical Name: 1,3-Benzenedimethanamine, Polymer with 2,2'-[(1-Methylethylidene)Bis(4,1-
Phenyleneoxymethylene)]Bis[Oxirane] and 2,2,4-Trimethyl-1,6-Hexanediamine
Common Name: MXDA/TMD/DGEBA adduct
CAS Number: 68738-77-2
Comment: Not on Pennsylvania Hazardous Substance List
Chemical Name: Phenol, 4,4'-(1-methylethylidene)bis-
Common Name: Bisphenol A
CAS Number: 80-05-7
Comment: Environmental Hazardous Substance
Chemical Name: 1,3-Benzenedimethanamine
Common Name: m-Xylenediamine
CAS Number: 1477-55-0
Comment: Hazardous Substance
Chemical Name: 1H-Imidazole, 1-Methyl-
Common Name: 1-Methylimidazole
CAS Number: 616-47-7
Printed: 9/16/2005 Page 5 of 5
Ren 8026 Medium Huntsman Advanced Materials
Americas Inc.
Effective Date: 12/2/04
Comment: Not on Pennsylvania Hazardous Substance List
16. OTHER INFORMATION
MSDS No: 31793
Approved By: Dianne Blessing
Title: EH&S Specialist
Disclaimer: The information and recommendations contained herein are based upon tests in controlled laboratory conditions, are
believed to be correct, and are provided for the sole purpose of hazard communication as part of Huntsman鈥檚 product safety
program. This product has not been tested for, and therefore is not recommended or suitable for, uses for which prolonged contact
with mucous membranes, abraded skin, or blood is intended or likely, or for uses for which implantation within the human body is
intended, and Huntsman assumes no liability for any such uses.
The information and recommendations contained herein are not intended to constitute performance information concerning the
product, which is available in separate technical data sheets available from Huntsman upon request. Users are urged, and are urged
to urge others who may come in contact with the product, to obtain and consult data sheets prior to purchase, use, transportation or
storage of the product.
HUNTSMAN MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY, QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. HUNTSMAN鈥橲 LIABILITY IS
STRICTLY LIMITED TO REIMBURSEMENT OF BUYER鈥橲 PURCHASE PRICE, OR IN HUNTSMAN鈥橲 DISCRETION
REPLACEMENT, OF THE PRODUCT IN RESPECT OF WHICH SUCH CLAIM IS MADE. HUNTSMAN鈥橲 LIABILITY IS
STRICTLY LIMITED BY LEGAL NOTICES IN TECHNICAL DATA SHEETS, PRODUCT LITERATURE AND/OR SALE
DOCUMENTS. The foregoing DISCLAIMERS and LIMITATION OF LIABILITY supercede inconsistent or contradictory
provisions in Buyer鈥檚 documents.
USER SHOULD CONSULT A LEGAL ADVISOR OR THE APPROPRIATE GOVERNMENTAL AGENCY TO DETERMINE
THE APPLICABILITY OR EFFECT OF ANY LAW OR REGULATION WITH RESPECT TO THE PRODUCT. HUNTSMAN
DOES NOT UNDERTAKE TO FURNISH ADVICE ON SUCH MATTERS.
Printed: 9/16/2005 Page 6 of 6
|