MATERIAL SAFETY DATA SHEET
FERRO
(YJ
Emeraency teleDhone number
Ferro Corporation, Polymer Additives Division
CHEMTREC: 1-800-424-9300
Walton Hills Operation
7050 Krick Road CHEMTREC (outside U.S.): 1-703-527-3887
Plant Number: 1-216-750-6708
Walton Hills, Ohio 44146-4494 USA
Date of Preparation: 08/15/2007
Product Name: Therm-Chek@ 363 425 Lb Drm
Polymer Additive
Chemical Family:
Chemical Name: Zinc Complex Mixture
Mixture
CAS-No.:
1035451
Product code:
~H!ZARb IDENTiFIcATION
Emeraency Overview
CAUTION
May cause eye/skin irritation. Avoid contact with the skin and the eyes.
NFPA 704
1
Health:
Colour: Amber
1
Fire:
Liquid
Physical state:
o
Mild
Odour: Instability:
Potential Health Effects
Principle routes of exposure: Eye contact.Skin contact. Inhalation.
Eye contact: May cause slight irritation.
Skin contact: Prolongedskin contactmaycause skin irritationand/ordermatitis.
Inhalation:Maycause irritationof respiratorytract.
Ingestion: May irritate digestive tract.
3. COMPOSITIQN/INFORMA1'ION-ONINGlUU>IENTS
CAS Number Weight %
Components
10 - 20%
64742-53-6
ProcessOil
1 - 5%
101-02-0
[Triphenylphosphite
1 - 5%
lZinccompound
The specific chemical identities are being withheld as a trade secret (29CFR191 0.1200).
This material contains organo phosphorous compounds which may decompose from hydrolysis with water (moisture in air) to produce
phenol, aliphatic alcohol, and phosphoric acid.
4.FIRSTAlP MEASURES
Rinse immediately with plenty of water, also under the eyelids. Get medical attention if irritation develops.
Eye contact:
Skin contact: Wash off immediately with soap and plenty of water. Remove and wash contaminated clothing before re-use. If
symptoms persist, call a physician.
Inhalation: Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms persist, call a
physician.
Ingestion: Drink plenty of water. Consult a physician if necessary. Do not induce vomiting without medical advice.
MARKETED BY
Page 1 of 4
Product name: Therm-Chek@ 363 '
HARWICK STANDARD
DISTRIBUTION CORPORATION
60 S. Seiberling Street. Akron, Ohio 44305
Treat symptomatically..
Notes to physician:
.5. FIRE-FIGHTING MEASURES
Flash point (OC): 136掳C ( 277掳F) Method: PMCC
Suitable extinguishing media: Use dry chemical, C02, water spray or "alcohol" foam.
Hazardous decomposition products: Thermal decomposition can lead to release of irritating gases and vapors.
Special protective equipment for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, NIOSH
(approved or equivalent) and full protective gear.
Unusual hazards: Material may change or decompose on exposure to moisture.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Evacuate area of all unnecessary personnel. Avoid contact with skin, eyes and clothing. Use personal
protective equipment.
Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Do not flush into
surface water or sanitary sewer system.
Methods for cleaning up: Soak up with inert absorbent material. Pick up and transfer to properly labelled containers. Dispose of
promptly. Clean contaminated surface thoroughly.
ANDsfbRAGE~
7. HANDLING
Handling: Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes and clothing. In case of
insufficientventilation,wear suitablerespiratoryequipment.
Storage: Keep container tightly closed in a dry and well-ventilated place. Keep containers dry and tightly closed to avoid moisture
absorption and contamination.
8.EXPOSURE CONTROLS/PERSONAL PROTECfION
Exposure limits
OSHA lo\CGIH
ComDonents
Process Oil 5 mg/m3 (oil mist) 5 mg/m3 (oil mist) TWA
10 ma/m3 (oil mist) STEL
Not established Not established
rrriphenyl phosphite
Engineering measures: Ensure adequate ventilation, especially in confined areas.
Eye protection: Safety glasses with side-shields.
Skin and body protection: Lightweight protective clothing.
Hand protection: Impervious gloves.
Respiratory protection: Use NIOSH approved respirator when ventilation is inadequate.
Hygiene measures: Handle in accordance with good industrial hygiene and safety practice. Ensure that eyewash stations and safety
showers are proximal to the work-station location. Wash hands before breaks and immediately after handling the product.
9. PHYSICAL AND CHEMICAL PROPERTIES
Amber Clear
Colour: Appearance:
Odour: Mild
Liquid
Physical state:
No data available
No data available Boiling point/range (OC):
Molecular weight:
No data available 0.940
pH: Specific gravity (Water =1):
No data available < 1.00
Evaporation rate (Water =1):
Vapor pressure (mmHg):
Page 2 of 4
Product name: Therm-<:hek@ 363 425 Lb Drm
9. PHYSICALAND CHEMICAL PROPER.TIES
Nodataavailable No data available
Water solubility (mg/l): VOCcontent(%)
10. STABILITY"AND ~AcrIVITY ~
Stability: Stable a.tnormal conditions.
Polymerization: Will not occur.
Hazardous decomposition products: None under normal use. Possible decomposition products from hydrolysis:. phenol, aliphatic
alcohol, phosphoric acid.
Materials to avoid: Strong oxidizing agents. Strong acids and strong bases. Water.
Conditions to avoid: Exposure to moisture.
11.TOXICOLOGICAL INFORMATION
No data is available on the product itself
Acute toxicity:
12. ECOLOGICAL INFORMATION
Aquatic toxicity: Not determined
Persistence and degradability: Not determined
13.I>lSPOSAt CONSIDERATIONS
Waste from residues I unused products: Waste must be disposed of in accordance with federal, state and local environmental
controlregulations.Where possiblerecyclingis preferredto disposalor incineration.
14.TRANSPORT INFORMATION
DOT (U.S.)
Proper shipping name: Not regulated.
TDG (Canada)
Proper shipping name: Not regulated.
15..REGUUTORY INFORMATION
U.S. Regulations:
Not subject to TSCA 12(b) Export Notification
State Reaulations
This productor its ingredientshave been evaluatedfor NewJersey,Pennsylvania,and CaliforniaProp65 suppliernotification
requirements. Substancesthat are subjectto notificationrequirements,if any, are listed below.
-NJ; PA; CA Prop65
Components ulations
inc compound Listed (PARTK)
Listed INJRTK
Product name: Therm-chek@ 363 425 Lb Drm Page 3 of 4
Canadian WHMIS
WHMIS hazard class: D28 Toxic materials.
WHMIS Ingredient Disclosure:
1%
1%
International Inventories
TSCA 8(b): Listed or exempt.
Canadian DSl: Listed or exempt.
EINECS: Listed or exempt.
Phillipines (PICCS): Not Listed.
Japan (ENCS): Not listed.
Korea (KECl): Listed.
China (IECS): Listed.
Australia (AICS): Listed.
.16. OTHER INFORMATION
For Industrial Use Only
J:iM搂..
Health: 1
Fire: 1
Physical hazard: 0
PPE:8
Prepared by: Ferro Technical Center
The information and recommendations contained in this Material Safety Data Sheet have been compiled from sources believed to be
reliable and to represent the most reasonable current opinion on the subject when the MSDS was prepared. No warranty, guaranty or
representation is made as to the correctness or sufficiency of the information. The user of this product must decide what safety
measures are necessary to safely use this product, either alone or in combination with other products, and determine its environmental
regulatory compliance obligations under any applicable federal or state laws.
End of Safety Data Sheet
L
Page 4 of 4
363 425 Lb Drm
Therm-Chek@
Product name:
--
|