MATERIAL SAFETY DATA SHEET
Page 1 of 5
RT-2015-B-SERIES
1. Product And Company Identification
Manufacturer Manufacturer Emergency Contacts & Phone Number
HENRY COMPANY CHEMTREC: (800) 424-9300
2270 Castle Harbor Place
Ontario, CA 91761
Company Contact: R&D Dept.
Telephone Number: (909) 947-7224
Web Site: www.resintechnology.com
Issue Date: 04/03/2007
Product Name: RT-2015-B-SERIES
MSDS Number: 5
Product Code: RT201502
Product/Material Uses
Polyurethane Foam Resin
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
hydrofluorocarbons 460-73-1 5 - 10
2-butoxyethanol 111-76-2 1-5
dibutyltin dilauryl mercaptide 1185-81-5 0-2
diethylene glycol 111-46-6 1-5
dimethylcyclohexylamine 98-94-2 0.5 - 1.5
lead naphthenate 61790-14-5 0-1
polyol blend Not Avail. 30 - 60
chlorinated phosphate ester 13674-84-5 0 - 30
EMERGENCY OVERVIEW
CAUTION. Direct skin and eye contact may cause irritation or burns.
Appearance/Odor: Amber colored liquid with a slight aromatic odor.
3. Hazards Identification
Primary Routes(s) Of Entry
Skin & Eye Contact, Inhalation.
Eye Hazards
May cause eye irritation. Irritation may be severe, causing burns and leading to permanent eye damage.
Skin Hazards
May cause skin irritation. Irritation may be severe resulting in burns to the skin from prolonged contact. Harmful if
absorbed through skin. A minor constituent in this product is in a class of compounds that may cause cholinesterase
inhibition. Symptoms of such inhibition may include salivation, sweating, headache, nausea and abdominal cramps.
Ingestion Hazards
Ingestion of significant quantities is thought to be unlikely. May be harmful if swallowed. Ingestion may cause
gastrointestinal upset, nausea and vomiting. May cause unconsciousness or death if swallowed.
MATERIAL SAFETY DATA SHEET Page 2 of 5
RT-2015-B-SERIES
3. Hazards Identification - Continued
Inhalation Hazards
Inhalation of vapors or mists may cause irritation of the nose and throat.
Chronic/Carcinogenicity Effects
None of the ingredients of this product comprising over 0.1% are classified as carcinogenic according to OSHA, National
Toxicology Program (NTP), International Agency for Research on Cancer (IARC) or the American Conference of
Governmental Industrial Hygienists (ACGIH).
Reproductive Effects
This product contains material (lead naphthanate) that may cause adverse reproductive effects.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get
medical attention immediately.
Skin
Remove contaminated clothing and shoes. Wash affected areas with soap and water. Get medical attention
immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
Call a physician or a poison control center immediately.
Inhalation
Remove the person from the contaminated area to fresh air. If breathing is difficult, give oxygen. If not breathing, give
artificial respiration. Get medical attention immediately.
5. Fire Fighting Measures
Flash Point: 269 掳F
Flash Point Method: Closed Cup
Lower Explosive Limit: 7.1%
Upper Explosive Limit: 17.7%
Fire And Explosion Hazards
Thermal decomposition (burning) may release irritating, corrosive and/or toxic gases, vapors and fumes. Closed
containers may explode when heated due to increased pressure. Do not puncture, cut open or reuse empty containers.
Extinguishing Media
Use the appropriate extinguishing media for the surrounding fire. Water spray or fog, carbon dioxide (CO2), dry
chemical, alcohol foam.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Eliminate all ignition sources. Use appropriate personal protective equipment (PPE). Contain and/or absorb spill with
inert material (e.g. sand, vermiculite). Collect and dispose. Avoid runoff to waterways and sewers.
7. Handling And Storage
Handling And Storage Precautions
Keep containers tightly closed. Store in a cool, dry, well-ventilated area. Protect from physical damage. Use only with
adequate ventilation. Wash thoroughly after handling. Empty containers may contain hazardous residue, do not reuse.
Open containers slowly to allow any pressure build-up to vent safely. Do not open or spray near eyes and face.
MATERIAL SAFETY DATA SHEET Page 3 of 5
RT-2015-B-SERIES
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate ventilation. When used outdoors, stay well away from building air intakes or close the intakes to
prevent product from entering building.
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
Use with chemical-protective gloves to prevent excessive skin contact. Chemical-resistant gloves made of rubber can be
used.
Respiratory Protection
The level of respiratory protection needed should be based on the evaluation of chemical exposures by a health or safety
professional. If required, use a NIOSH-approved air purifying respirator with organic vapor cartridge or supplied air
respirator.
Occupational Exposure Limits for individual ingredients (if available) are listed below.
Ingredient(s) - Exposure Limits
2-butoxyethanol
ACGIH TLV-TWA 20 ppm
OSHA PEL-TWA 50 ppm (Skin)
dibutyltin dilauryl mercaptide
ACGIH TLV-TLV: 0.1 mg/m3, as organic Tin (skin)
ACGIH TLV-STEL: 0.2 mg/m3, as organic Tin (skin)
OSHA PEL-TWA: 0.1 mg/m3, as organic Tin
diethylene glycol
AIHA WEEL-TWA 10 mg/m3
lead naphthenate
ACGIH TLV-TWA: 0.05 mg/m3
OSHA PEL-TWA: 0.05 mg/m3
9. Physical And Chemical Properties
Appearance
Amber colored liquid
Odor
Low, slightly aromatic
Chemical Type: Mixture
Physical State: Liquid
Boiling Point: not available 掳F
Specific Gravity: 1.2 @ 70潞F
Vapor Pressure: not available
Vapor Density: 5.67 @ 86潞F
pH Factor: 7-10
Solubility: moderate in water
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Incompatible Materials
Avoid contact with strong oxidizing agents.
Hazardous Decomposition Products
Toxic and irritating gases, vapors or fumes of carbon monoxide (CO), carbon dioxide (CO2), oxides of nitrogen,
MATERIAL SAFETY DATA SHEET Page 4 of 5
RT-2015-B-SERIES
10. Stability And Reactivity - Continued
Hazardous Decomposition Products - Continued
hydrogen fluoride
11. Toxicological Information
Reproductive Effects
Contains lead naphthanate, identified as a reproductive toxin.
Miscellaneous Toxicological Information
Toxicological testing has not been conducted for this product overall. Available toxicological data for individual
ingredients are summarized below.
Ingredient(s) - Toxicological Data
2-butoxyethanol
oral-rat LD50: 500 mg/kg
dibutyltin dilauryl mercaptide
oral-rat LD50: 240 mg/kg
dermal-rabbit LD50: >1000 mg/kg
diethylene glycol
Oral-rat LD50: 14800 mg/kg
dimethylcyclohexylamine
oral-mouse LD50: 320 mg/kg
dermal-rat LD50: 370 mg/kg
inhal-rat LC50: 1100 mg/m3/2 hr
lead naphthenate
oral-rat LD50: 5100 mg/kg
chlorinated phosphate ester
oral-rat LD50: 1500 mg/kg
12. Ecological Information
No specific information available.
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Avoid/prevent release to the
environment.
14. Transport Information
Not Regulated - Resin Compound
15. Regulatory Information
SARA Hazard Classes
Acute Health Hazard
Ingredient(s) - U.S. Regulatory Information
2-butoxyethanol
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
lead naphthenate
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
Ingredient(s) - State Regulations
2-butoxyethanol
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
MATERIAL SAFETY DATA SHEET Page 5 of 5
RT-2015-B-SERIES
15. Regulatory Information - Continued
Ingredient(s) - State Regulations - Continued
diethylene glycol
Pennsylvania - Workplace Hazard
dimethylcyclohexylamine
New Jersey - Workplace Hazard
New Jersey - Special Hazard
New York City - Hazardous Substance
lead naphthenate
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
California - Proposition 65
Massachusetts - Hazardous Substance
Canadian Regulatory Information
This product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the
information required by the CPR. WHMIS Classification: D1B - Toxic
Ingredient(s) - Canadian Regulatory Information
2-butoxyethanol
WHMIS - Ingredient Disclosure List
dimethylcyclohexylamine
WHMIS - Ingredient Disclosure List
lead naphthenate
WHMIS - Ingredient Disclosure List
WHMIS - Canada (Pictograms)
NFPA HMIS
HEALTH 2
1
FLAMMABILITY 1
2 0
REACTIVITY 0
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
This MSDS Supersedes A Previous MSDS Dated: 05/12/2005
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties and
make no representations as to the accuracy or completeness of the information contained therein, and assume
no responsibility regarding the suitablility of this information for the user's intended purposes or for the
consequences of its use. Each individual should make a determination as to the suitability of the information
for their particular purposes(s).
HENRY COMPANY
Printed Using MSDS Generator鈩? 2000
|